Wisconsin_Memorial_Architectural_Set_12-21-2023_0002.pdf

39 MB Posted

Attached to
PRESERVE WISCONSIN STATE MONUMENT
Solicitation number
140P5225R0008
Issued by

About this file

Written by GovTribe AI ·

These are architectural drawings (sheets A102-A207) for the Wisconsin State Monument preservation project at Vicksburg National Military Park, detailing comprehensive restoration and conservation work for an early 20th-century granite monument standing 122 feet high. The drawings specify detailed technical requirements for stone and bronze restoration, including 100% stone repointing at all monument elevations, cleaning with non-acidic biodegradable detergent, fully restoring bronze statues/bas reliefs with micro-abrasive stripping and dark brown statuary finish, and removing existing concrete/grout toppings.

Key restoration specifications include repairing granite elements using stone dutchmen matching original color/texture, injecting cracks with cementitious grout, installing stainless steel masonry pins, cleaning metallic stains with poultices, providing missing bronze fasteners and stars, and installing crack monitors. The monument features intricate bronze elements including statues of an infantryman, cavalryman, "Old Abe" war eagle, and relief panels honoring 9,075 Wisconsin troops who fought at Vicksburg, with the restoration aimed at preserving historical integrity while addressing structural and aesthetic conservation needs.

View the file

Other files

File Type Posted
Sol_140P5225R0008_Amd_0003.pdf PDF
Laydown_and_Parking_areas_0002.pdf PDF
SPECS_Section_013100_Project_Management_And_Coordination_Final_0002.pdf PDF
SPECS_SECTION_012700_Definition_Of_Contract_Line_Items_Final_0002.docx DOCX document
RFIs_NPS_Response_09_25_2025_0002.xlsx XLSX spreadsheet
SPECS_015000_TemporaryFacilitiesAndControls_ezf_09252025_0002.pdf PDF
SF24-23a_BID_BOND_0002.pdf PDF
Sol_140P5225R0008_Amd_0002.pdf PDF
Wisconsin_Memorial_Structural_Set_12-21-2023_0002.pdf PDF
B11_PRE-BID_PROPOSAL_CONFERENCE_SIGN-IN_SHEET_Wisconsin_Monument_Sign_9-19-24_0002.pdf PDF
ATCH_03A_CONTRACT_PRICE_SCHEDULE_WISCONSIN_MONUMENT_SCHEDULE_B_REVISED_09252025_0002.xlsx XLSX spreadsheet
Sol_140P5225R0008_Amd_0001.pdf PDF
ATCH_01_PLANS_WISCONSIN_MONUMENT_100__CD_Set_SCHEDULE_C.pdf PDF
ATCH_04_WAGE_DETERMINATION_WISCONSIN_MONUMENT_MS20250069_01032025_gov.pdf PDF
Sol_140P5225R0008.pdf PDF
ATCH_02_SPECS_WISONSIN_MONUMENT_Specifications_SCHEDULE_C.pdf PDF
ATCH_03_CONTRACT_PRICE_SCHEDULE_WISCONSIN_MONUMENT_SCHEDULE_B.xlsx XLSX spreadsheet
Show all 17

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

GENERAL NOTES KEYNOTES (SOME KEYNOTES NOT USED THIS SHEET)

AutoCAD SHX Text

AutoCAD SHX Text x2

AutoCAD SHX Text

AutoCAD SHX Text 25"x9"x3"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 2"x2"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4"x1"

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text A202

AutoCAD SHX Text

AutoCAD SHX Text A202

AutoCAD SHX Text

AutoCAD SHX Text A202

AutoCAD SHX Text

AutoCAD SHX Text A202

AutoCAD SHX Text

AutoCAD SHX Text A202

AutoCAD SHX Text

AutoCAD SHX Text A202

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE BIT LOOP. REPLICATE BRONZE BIT LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT FLOOR PLAN

AutoCAD SHX Text A102

AutoCAD SHX Text A

AutoCAD SHX Text

MONUMENT

AutoCAD SHX Text

FLOOR PLAN

AutoCAD SHX Text A102

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE OF FEET

AutoCAD SHX Text

SCALE A

AutoCAD SHX Text (1/8"=1'-0")

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

PLAN NORTH

TRUE NORTH

A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE BIT LOOP. REPLICATE BRONZE BIT LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

PLAZA EXTERIOR

AutoCAD SHX Text

WALL ELEVATIONS

AutoCAD SHX Text A201

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U EAST WALL - PLAZA EXTERIOR WALL

AutoCAD SHX Text A201

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U EAST WALL - PLAZA EXTERIOR WALL

AutoCAD SHX Text A201

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U WEST WALL - PLAZA EXTERIOR WALL

AutoCAD SHX Text A201

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U WEST WALL - PLAZA EXTERIOR WALL

AutoCAD SHX Text A201

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U NORTHEAST CORNER - PLAZA EXTERIOR WALL

AutoCAD SHX Text A201

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U NORTHWEST CORNER - PLAZA EXTERIOR WALL

AutoCAD SHX Text A201

AutoCAD SHX Text

NTS

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE BIT LOOP. REPLICATE BRONZE BIT LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

PLAZA INTERIOR

AutoCAD SHX Text

WALL ELEVATIONS

AutoCAD SHX Text A202

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U WEST BRONZE STATUE AT PLAZA

AutoCAD SHX Text A202

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U WEST WALL - PLAZA INTERIOR WALL

AutoCAD SHX Text A202

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U NORTHWEST CORNER - PLAZA INTERIOR WALL

AutoCAD SHX Text A202

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U NORTH WALL - PLAZA INTERIOR WALL

AutoCAD SHX Text A202

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U NORTHEAST CORNER - PLAZA EXTERIOR WALL

AutoCAD SHX Text A202

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text

%%U NORTHWEST CORNER - PLAZA EXTERIOR WALL

AutoCAD SHX Text A202

AutoCAD SHX Text

NTS

AutoCAD SHX Text 8"x3"x3"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE BIT LOOP. REPLICATE BRONZE BIT LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text THIS MEMORIAL IS DEDICATED IN GRATEFUL REMEMBRANCE OF THE FAITHFUL SERVICE, UNSELFISH DEVOTION AND EXALTED PATRIOTISM OF WISCONSIN SOLDIERS ENGAGED IN THE CAMPAIGN AND SIEGE OF VICKSBURG, MARCH 29 - JULY 4, 1863.

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

MONUMENT BASE

AutoCAD SHX Text

NORTH AND SOUTH

AutoCAD SHX Text

ELEVATIONS

AutoCAD SHX Text A204

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT BASE - NORTH ELEVATION

AutoCAD SHX Text A204

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE OF FEET

AutoCAD SHX Text

SCALE D

AutoCAD SHX Text (1/2"=1'-0")

AutoCAD SHX Text

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT BASE - SOUTH ELEVATION

AutoCAD SHX Text A204

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

COLUMN BASE

AutoCAD SHX Text

PEDESTAL PEDIMENT

AutoCAD SHX Text

COLUMN BASE

AutoCAD SHX Text

PEDESTAL PEDIMENT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

BRONZE BAS RELIEF

AutoCAD SHX Text

BRONZE PLAQUE

AutoCAD SHX Text

A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. BRAZE BRONZE TO REPAIR HOLE AND CRACKED REIN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE BIT LOOP. REPLICATE BRONZE BIT LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

MONUMENT BASE

AutoCAD SHX Text

EAST AND WEST

AutoCAD SHX Text

ELEVATIONS

AutoCAD SHX Text A205

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT BASE - EAST ELEVATION

AutoCAD SHX Text A205

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE OF FEET

AutoCAD SHX Text

SCALE D

AutoCAD SHX Text (1/2"=1'-0")

AutoCAD SHX Text

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT BASE - WEST ELEVATION

AutoCAD SHX Text A205

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

COLUMN BASE

AutoCAD SHX Text

PEDESTAL PEDIMENT

AutoCAD SHX Text

COLUMN BASE

AutoCAD SHX Text

PEDESTAL PEDIMENT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8x4x2.5

AutoCAD SHX Text

AutoCAD SHX Text 6x1

AutoCAD SHX Text

AutoCAD SHX Text 4x4

AutoCAD SHX Text

BRONZE BAS RELIEF

AutoCAD SHX Text

BRONZE BAS RELIEF

AutoCAD SHX Text

GENERAL NOTES

KEYNOTES (SOME KEYNOTES NOT USED THIS SHEET)

AutoCAD SHX Text THIS MEMORIAL IS DEDICATED IN GRATEFUL REMEMBRANCE OF THE FAITHFUL SERVICE, UNSELFISH DEVOTION AND EXALTED PATRIOTISM OF WISCONSIN SOLDIERS ENGAGED IN THE CAMPAIGN AND SIEGE OF VICKSBURG, MARCH 29 - JULY 4, 1863.

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 AND 4 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301. 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE CRACKED REIGN PIECE. BRAZE BRONZE TO REPAIR HOLE CRACKED REIGN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE REIGN LOOP. REPLICATE BRONZE REIGN LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

MONUMENT

AutoCAD SHX Text

NORTH AND SOUTH

AutoCAD SHX Text

ELEVATIONS

AutoCAD SHX Text A206

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT NORTH ELEVATION

AutoCAD SHX Text A206

AutoCAD SHX Text I

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT SOUTH ELEVATION

AutoCAD SHX Text A206

AutoCAD SHX Text I

AutoCAD SHX Text

SCALE I

AutoCAD SHX Text (3/16"=1'-0")

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE OF FEET

AutoCAD SHX Text

AutoCAD SHX Text 8x8

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TYPICAL AT SKYWARD JOINTS OF COLUMN BASE AND PEDESTAL PEDIMENT

AutoCAD SHX Text

AutoCAD SHX Text

TYPICAL AT SKYWARD JOINTS OF COLUMN BASE AND PEDESTAL PEDIMENT

AutoCAD SHX Text

GENERAL NOTES

KEYNOTES (SOME KEYNOTES NOT USED THIS SHEET)

AutoCAD SHX Text

1. REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 REPOINT MORTAR JOINTS AT DISPLACED GRANITE ELEMENT AFTER STRUCTURAL GROUTING. REF 1/S104 AND 4 & 5/A301. 2. TOOL GRANITE TO REMOVE LOOSE FLAKING. TOOL GRANITE TO REMOVE LOOSE FLAKING. 3. INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INJECT THROUGH-CRACKS WITH CEMENTITIOUS GROUT TO FILL VOIDS AND PREVENT MOISTURE INFILTRATION. ASSUME THE LENGTH OF CRACK IS THE FULL HEIGHT OF THE STONE. FOR STAIR TREADS, ASSUME THE LENGTH OF CRACK IS 14" U.N.O. SEE DETAIL 1/A301. 4. REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, REPAIR SPALL WITH STONE DUTCHMAN THAT MATCHES THE EXISTING STONE IN COLOR, TEXTURE, GRAIN, AND PROFILE. USE SALVAGE STONE WHERE POSSIBLE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 2/A301. 5. REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, REPAIR EXISTING PATCH WITH PATCHING MORTAR THAT MATCHES EXISTING STONE IN COLOR, TEXTURE, AND PROFILE. ESTIMATED SIZE INDICATED PER LOCATION. SEE DETAIL 3/A301. 6. BRAZE BRONZE TO REPAIR HOLE CRACKED REIGN PIECE. BRAZE BRONZE TO REPAIR HOLE CRACKED REIGN PIECE. 7. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. REMOVE THICK DEPOSITS OF CALCIUM CRUST WITH WOODEN SCRAPERS AND 120-GRIT SANDPAPER. TREAT STUBBORN CRUST WITH MICRO-ABRASIVE CLEANING. ASSUME 2 SF PER LOCATION. 8. INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT INSTALL 1/4" STAINLESS STEEL MASONRY PIN TO SECURE STONE AT INCIPIENT SPALL. REPOINT REMAINING JOINT OR FILL CRACK WITH COLOR-MATCHED INJECTION GROUT. SEE DETAIL 5/A301.

AutoCAD SHX Text

9. CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE CLEAN CUPROUS METALLIC STAIN ON STONE ELEMENTS FROM JOINT TO JOINT WITH AN ALKALINE POULTICE TO DRAW STAINS OUT OF STONE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. REPEAT POULTICE PROCESS UNTIL STAIN IS FULLY REMOVED. ASSUME UP TO TWO APPLICATIONS AT EACH INSTANCE. ASSUME ONE STONE UNIT PER LOCATION U.N.O. 10. CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET CLEAN FERROUS METALLIC STAIN ON GRANITE ELEMENTS FROM JOINT TO JOINT WITH POULTICE. LET POULTICE DWELL UP TO 24 HOURS WITH PLASTIC COVER. REMOVE COVER AND LET DRY. REMOVE POULTICE AND RINSE. ASSUME ONE STONE UNIT PER LOCATION U.N.O 11. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. PROVIDE BRONZE FASTENERS WHERE MISSING. REF 7/A301. 12. REPLICATE END OF BRONZE GUN BARREL. REPLICATE END OF BRONZE GUN BARREL. 13. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. PROVIDE BRONZE STAR WHERE MISSING. REF 8/A203. 14. INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL INSTALL T-CAPS AT SKYWARD JOINTS AT COLUMN BASE AND PEDESTAL PEDIMENT. REF 8/A301. 15. INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR INSTALL CRACK MONITOR AT DISPLACED JOINT. NPS TO MONITOR FOR CYCLICAL MOVEMENT. 16. REPLICATE BRONZE REIGN LOOP. REPLICATE BRONZE REIGN LOOP. 17. REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.REMOVE LOOSE BOLLARD. REPAIR PIPE CONNECTION AND RESET.

AutoCAD SHX Text A CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. CONTRACTOR TO V.I.F. ALL QUANTITIES AND LOCATIONS OF WORK. B ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. ALL EXISTING HISTORIC MATERIAL TO REMAIN U.N.O. C DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. DO NOT REPAIR MINOR SPALLS AND CHIPS IN MASONRY U.N.O. D REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE REPOINT STONE 100% AT ALL ELEVATIONS OF THE WALLS, STAIRS, BASE, AND SHAFT OF MONUMENT. SEE DETAILS 4/A301 AND 6/A301. E CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. CLEAN STONE 100% WITH NON-ACIDIC BIODEGRADABLE ARCHITECTURAL ANTI-MICROBIAL DETERGENT. ASSUME TWO APPLICATIONS OF CLEANER. F FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE FULLY RESTORE BRONZE STATUES, BAS RELIEFS, CREST, STARS, AND MEMORIAL PANELS. STRIP BRONZE TO BARE METAL USING MICRO-ABRASIVES. PATINATE WITH A DARK BROWN STATUARY FINISH. APPLY TWO APPLICATIONS OF PROTECTIVE COATING. PROTECT ALL STONE DURING BRONZE TREATMENT. SEE SHEET A203. G REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING AND CONCRETE SLAB IN THEIR ENTIRETY AT PLAZA. SEE STRUCTURAL DRAWINGS. H REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL REMOVE EXISTING GROUT TOPPING IN ITS ENTIRETY AT GRAND STAIR LANDINGS. SEE STRUCTURAL DRAWINGS. I AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD. AFTER CONCRETE TOPPING REMOVAL AT PLAZA, EXAMINE ANCHOR CONDITION AT LOOSE BOLLARD.

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

WISCONSIN

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

A/E FIRM:

AutoCAD SHX Text 209569

AutoCAD SHX Text

MILITARY PARK

AutoCAD SHX Text

VICKSBURG NATIONAL

AutoCAD SHX Text 01/26/2024

AutoCAD SHX Text

DB

AutoCAD SHX Text

AA/SO

AutoCAD SHX Text

BB/DP

AutoCAD SHX Text 191499

AutoCAD SHX Text

AutoCAD SHX Text

MONUMENT

AutoCAD SHX Text

EAST AND WEST

AutoCAD SHX Text

ELEVATIONS

AutoCAD SHX Text A207

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT WEST ELEVATION

AutoCAD SHX Text A207

AutoCAD SHX Text I

AutoCAD SHX Text

SCALE I

AutoCAD SHX Text (3/16"=1'-0")

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE OF FEET

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

AutoCAD SHX Text %%u MONUMENT EAST ELEVATION

AutoCAD SHX Text A207

AutoCAD SHX Text I

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

2 SF

AutoCAD SHX Text

2 SF

AutoCAD SHX Text

AutoCAD SHX Text

TYPICAL AT SKYWARD JOINTS OF COLUMN BASE AND PEDESTAL PEDIMENT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

TYPICAL AT SKYWARD JOINTS OF COLUMN BASE AND PEDESTAL PEDIMENT

A102-PLAN
S105
A201 PLAZA EXT
S302
A202 PLAZA INT
S302
A203 BRONZEWORK
A204 MONUMENT BASE
S302
A205 MONUMENT BASE
S302
A206 N S ELEVATION
S304
A207 E W ELEVATION
S304

A301 MASONRY DET

File details come from the government source that posted it. Updated .