B08 140P5121Q0032 Attach 0007 TUIN CR NON-PAPER OBJECTS_0003.xlsx

Sheet

LEATHER HEART (7.5 CM x 6 CM WIDE) IS SEWN TO THE LEATHER SIDE. "SPALDING MANUFACTURER'S TAG SEWN ON THE SIDE WORN NEXT TO THE BODY. MADE IN USE, REGISTERED WITH THE U.S. PATENT

ING A STAGE SETTING WITH ETCHING DEPICTING VARIOUS SOCIAL SERVICES. ALSO INCLUDES AN INSCRIPTION. "ANNUAL AWARD 1940 TO DR. GEORGE WASHINGTON CARVER TUSKEGEE INSTITUTE TUSKEGEE INSTITUTE, ALABAMA. SELECTED BY NATIONAL COMMITTEE NEWSPAPER PUBLISHERS-EDITORS

FOR HUMANITARIAN AND SCIENTIFIC ACHIEVEMENTS THROUGH WHICH COUNTLESS THOUSANDS

"THE NATL. ASSN. FOR THE ADVANCEMENT OF COLORED PEOPLE" AND AN INSIGNIA OF AN OPEN BOOK WITH NAACP ACROSS AND A BALANCE SCALE. THERE IS ALSO A RECTANGULAR OPENING INTO WHICH A PIECE OF PAPER HAS BEEN INSERTED W/"GEORGE W. CARVER TUSKEGEE, INST. ALA." TYPED ON IT.

TWO PIN CLASPS ARE ON THE REVERSE: ONE TO BE ATTACHED TO THE WEARED, THE OTHER HOLDS A

ATTACHED TO FRAME DIRECTLY UNDER THE TABLE TOP. THE LEGS ARE FOUR IN NUMBER, OF CABRIOLE STYLE. THE LOWER TIER IS ATTACHED DIRECTLY TO THE FOUR LEGS. THE TABLE HAS A DARK FINISH, POSSIBLY MAHOGANY. LEGS ARE ATTACHED USING FOUR LARGE SCREWS WITH WASHERS, AND TO BOTTOM

CROSS BAR. THE SMALLER TIER IS ATTACHED UNDERNEATH WITH STUDS, APPROX. 4 INCHES IN LENGTH EXTENDING FROM THE 4 LEGS. THE TABLE IS A BASIC RECTANGULAR SHAPE WITH ROUNDED CORNERS.

THE EDGE OF THE TABLE HAS A DECORATIVE DESIGN. THE LEGS HAVE BEEN TURNED TO BLEND WITH THE

TOP IS ATTACHED TO THE LEGS UNDERNEATH BY SUPPORTING CROSS STUDS. THE SMALLER TIER IS ATTACHED TO THE FOUR LEGS BY STUDS EXTENDING FROM THE LEGS. THE FOUR SUPPORTING LEGS ARE TURNED TO BLEND WITH THE DECORATION AROUND CORNERS OF TABLE. THE TABLE TOP HAS EXTREME

WITH A SMALLER TIER UNDERNEATH. THE UNDERNEATH TIER IS ATTACHED BY FOUR WOODEN LEGS. LEGS ARE SUPPORTED BY BAMBOO STICKS AND SCREWS. THE CENTER OF EACH TIER HAS A ROUND SOLID PIECE OF WOOD ATTACHED THROUGHT THE WICKER TIER OF 3 PIECES OF CROSS CUT WOOD ATTACHED TO THE

BOARDS AND SCREWS. THE TOP IS CUT IN A FLOWER DESIGN, THE LEGS HAVE BEEN TURNED TO COMPLIMENT THE TOP. THE LEGS ARE ATTACHED AT THE BOTTOM BY A SUPPORTING X-STRETCHER. IT HAS A DECORATION 2 1/2 SPEAR HEAD IN THE CINTER. THE TABLE HAS A DARK FINISH POSSIBLY

CORDOVAN IMITATION LEATHER. THE CHAIR HAS DARK MAHOGANY FINISH. THE SEAT CUSHION IS RIPPED

WOODEN LEGS WRAPPED IN WICKER. THE CHAIR HAS TWO CARRYING HANDLES, ONE AT THE REAR OF EITHER ARM REST. THE BACK REST IS SUPPLEMENTED BY 2 SIDE BLINDS CREATING A CURVED EFFECT.

THE CHAIR HAS A PRINTED DESIGN CUSHION BACKREST, BROWN AND BEIGE IN COLOR. THE REVERSE OF

AND EXTREME REAR. IT HAS A HIGH BACK WITH A HALF WAGON WHEEL DESIGN. THE DESK IS SUPPORTED WITH FOUR STRAIGHT LEGS WITH CROSS SECTIONS ON ALL SIDES EXCEPT FRONT. THE DESK HAS A

RECTANGULAR IN SHAPE, THE END CORNERS ARE SLIGHTLY ROUNDED. THE TABLE HAS A TRESTLE LEG AT EITHER END. THERE IS A SINGLE STRETCHER BAR CONNECTING THE TWO TRESTLE LEGS. THERE IS DECORATIVE HOLES CUT IN THE CENTER OF THE STRETCHER BAR. THERE IS AN INDENTED DESIGN ALONG

HAS AN OVAL SHAPED BACKREST WITH DECORATIVE CARVED DESIGNS. THE SIDE ARMS ARE CUSHIONED AND COVERED WITH UPHOLSTERY MATCHING THE SEAT CUSHION. THE TWO FRONT LEGS HAVE CASTERS FOR

LEG. THE BACKREST IS CONSTRUCTED OF CANING. THE SEAT HAS AN UPHOLSTERED GREEN CUSHION.

THERE IS A "H" STRETCHER AT THE BOTTOM FOR SUPPORT. THE CHAIR HAS A DARK FINISH

LEGS. THE BACKREST HAS A CANING INSERTION. THE SEAT HAS UPHOLSTERED CUSHION, LIGHT GREEN IN COLOR. THERE IS AN "H" STRETCHER AT THE BOTTOM OF THE CHAIR FOR SUPPORT. THE CHAIR HAS

BY EXTENSION OF THE BACK LEGS OF THE CHAIR. THE SEAT HAS A LIGHT GREEN UPHOLSTERED CUSHION ON. THERE IS A "H" STRETCHER BENEATH THE SEAT FOR SUPPORT. THE CHAIR HAS A DARK,

A DARK FINISH. THE DESK BACK RISES 12.5 CM ABOVE THE DESK TOP, RISE ALSO EXTENDS TO THE SIDES. THERE ARE BASKETS IN BOTH REAR CORNERS, USED FOR PENCIL HOLDERS. IN THE CENTER OF THE RISE ALONG THE REAR IS A FLAG DESIGN WOVEN IN WICKER. THE FOUR LEGS ARE SUPPORTED UNDERNEATH BY 2 "C" STRETCHER, ONE CURVED, THE OTHER IN BLOCK SHAPE. A STRETCHER IS

CANE BOTTOM AND BACKREST WITH FOUR TURNED RODS 20CM LONG EXTENDING ABOVE THE CANE BACKREST. RODS ATTACH TO A CROSS COARD AT THE TOP. THE OTHER STRETCHER BARS ARE ROUND,

FOR A NATURAL COLOR CANE MESH INSERT. THE BACKREST HAS A 1 INCH CUT IN THE SHAPE OF A HEART IN THE TOP CENTER. THE LEGS ARE SUPPORTED BY A SQUARE SHAPED "H" STRETCHER. THE FRONT LEGS ARE BOW CUT AND FLAIRED AT THE BASE, THE REAR LEGS ARE SQUARE. THE WOOD IS A

FOR NATURAL COLORED CANING. THE BACKREST HAS A 1 INCH CUT IN THE SHAPE OF A HEART 2 1/2 INCHES BELOW THE TOP CENTER OF THE REST. THE LEGS ARE SUPPORTED BY A SQUARE SHAPED "H" STRETCHER. THE FRONT LEGS ARE BOW CUT AND FLAIRED AT THE BASE, THE REAR LEGS ARE PLAIN

THE UPHOLSTERED SEAT AND BACKREST ARE COVERED WITH A CORDOVAN IMITATION LEATHER. THE

OVAL BACKREST WITH CARVED DESIGNS. THE ARMS ARE CUSHIONED, UPHOLSTERED WITH SAME MATERIAL AS SEAT. THE CUSHION IS CENTERED ON THE ARM OF THE CHAIR. THE FRONT LEGS HAVE ROLLERS

STRETCHERS ARE TURNED. THE BACK LEGS AND STRETCHERS ARE A PLAIN SQUARE CUT. THE SEAT AND BACKREST ARE UPHOLSTERED WITH GREEN IMITATION LEATHER, WORN AND SAGGING. THE UPHOLSTERY

TELEPHONE WAS MADE BY WESTERN ELECTRIC. THE HAND CRANK, RECEIVER, TRANSMITTER AND INSTRUCTION PLATE ARE MISSING. THE TWO TRANSMITTER WIRES ARE PROTRUDING FROM THE FRONT OF THE SET. IT HAS 2 ALARM BELLS ON FRONT OF THE WOODEN BOX. THERE ARE ALSO 4 HOLES FOR MOUNTING THE DEVICE, ONE IN EACH CORNER. THE BOX IS RECTANGULAR IN SHAPE AND HAS AN

CANE MESH. THERE ARE FOUR STRETCHERS, THE TWO STRETCHERS ARE IN THE FRONT, ROUND

STRETCHERS ON THE SIDES AND ONE ROUND STRETCHER. THE BACK REST HAS THREE VERTICAL SUPPORTS WITH THE TOP RAIL CONNECTING THE OUTER BACK POST WITH TWO SCREWS. THE CENTER SPLAT IS

MESH SEAT WITH AN OVAL SHAPED FRONT. THIS IS ALSO PAINTED BLUE. THE FRONT LEGS AND FRONT STRETCHERS ARE MADE FROM TURNED WOOD. THE SIDE AND BACK STRETCHERS ARE PLAIN AND

BACKREST IS OVAL SHAPED WITH A LEAF DECORATION CARVED IN THE TOP CENTER. AT THE BASE OF THE LEAF A HOLE IS CUT IN THE SHAPE OF A SPADE. THE SPLLAT HAS SEVERAL DECORATIVE HOLES;

ONE IS A DIAMOND, ONE IS AN ARROWHEAD AND TWO ARE UPSIDE DOWN TERAR DROPS. THE SEAT OF

COLOR. THE BACKREST IS OVAL SHAPED WITH A DECORATIVE LEAF CARVED INTO THE TOP CENTER. A HOLE IS CUT IN THE FORM OF A SPADE AT THE BASE OF THE CARVED LEAF. THE SPLAT HAS FOUR HOLES; ONE DIAMOND SHAPED, ONE SHAPED LIKE AN ARROW HEAD, AND TWO SHAPED LIKE UPSIDE DOWN

DRAWER IS OPEN. IT HAS A TWO PEDESTAL MIRROR STANDS, THE PEDESTAL HAS BEEN TURNED. THERE IS A STRETCHER BAR HOLDING THE PEDESTALS IN PLACE. THE SUPPORT LEGS HAVE ROLLERS FOR MOBILITY. THE DRAWER PULLS ARE SQUARE. THE CHEST IS OF MEDIUM GRAINED WOOD WITH A DARK

LEATHER. IT HAS TWO SQUARE SIDE STRETCHERS AND ONE FRONT AND REAR STRETCHER. THE LEGS

ARE PLAIN CUT. THE BACKREST HAS THREE SPINDLES IN THE CENTER OF THE REAR POST.

ATTACHED TO A METAL RING UNDERNEATH. IT HAS FOUR "C" STRETCHERS. THE SEAT HAS BEEN REPLACED WITH A ROUND PIECE OF 1/4 INCH PLYWOOD. THE LEGS ARE SUPPORTING THE SEAT WITH

FOUR "L" FASTENERS. THE CHAIR HAS BEEN PAINTED A BURNT ORANGE COLOR. THIS CHAIR

WRITING SURFACE. INSIDE IT HAS A SMALL DRAWER IN THE CENTER, TO THE LEFT OF THE CENTER DRAWER ARE 3 VERTICAL WOODEN HOLDERS, TO THE RIGHT ARE 2 HORIZONTAL HOLDERS. THE DROP FRONT HAS A KEY HOLE FOR LOCKING. BENEATH THE WRITING SURFACE IS ONE LARGE CENTER DRAWER OPENING TO THE OUTSIDE. THE REAR LEGS ARE STRAIGHT AND THE FRONT LEGS ARE CURVED. THE

ARMS. THE WOODEN SEAT LIFTS UP TO REVEAL A SMALL COMPARTMENT UNDERNEATH. THE FRONT LEGS ARE TURNED WITH A SPOOL DESIGN. THE REAR LEGS ARE PLAIN CUT WITH SLIGHT CURVE. THE BACKREST IS OVAL SHAPED, IT HAS THE BUST OF A COAT OF ARMS CARVED IN THE CENTER. ABOVE

THE FORM OF A COIN, DISPLAYING BOTH SIDES OF THE MEDALLION ON A WOODEN BACKGROUND. THE BACKGROUND BOARD IS CONSTRUCTED OF THREE PIECES OF WOOD, THERE IS A TRIANGULAR PORTION AT EACH END. ON THE FACE OF THE COIN ARE PROFILES OF ABRAHAM LINCOLN, BOOKER T. WASHINGTON AND SAMUEL C. ARMSTRONG. THE REVERSE READS "I LEARNED AT HAMPTON THAT THOSE WHO ARE THE

SIDE OF THE LEFT ARMREST. THE RIGHT ARMREST FORMS A PLATFORM FOR HOLDING ITEMS. THERE IS A HOLE IN THE ARMREST FOR HOLDING A DRINKING GLASS. THE BACKREST IS SLANTED AT APPROX. 45 DEGREE ANGLE. THE FOOT END OF THE LOUNGE HAS A SLIGHT UPWARD CURVE. LOUNGE HAS 2 "X"

FINISH. THE FLAT SURFACE OF THE TABLE HAS A SUNFLOWER DESIGN CARVED IN. THE TOP TIER SURFACE IS LARGE AND SQUARE, THE BOTTOM TIER IS SMALLER AND AFFIXED TO THE INSIDE OF THE

COLOR ON THE REAR SIDE. THE VANITY HAS ONE DRAWER WITH 2 HANDLES LOCATED CENTER AND JUST BENEATH THE TABLE TOP. THE TOP SURFACE IS IN THE SHAPE OF A HALF MOON. THERE ARE 4 CABRIOLE LEGS. THE MIRROR IS OVAL SHAPED AND SUPPORTED BY TWO POST WHICH ARE HALF THE MIRROR HEIGHT, MIRROR FRAMES IS ATTACHED BY TWO SCREWS. THE MIRROR FRAME IS ATTACHED TO

FORMED OF RIBS AND IS BUILT CLOSE TO THE FLOOR IN ORDER TO ACCOMODATE LARGE CUSHIONS. THE BACKREST IS ALSO FORMED OF RIBS TO ACCOMODATE CUSHIONS. THERE ARE TWO FRONTS LEGS ARE FOUR REAR LEGS. THE SOFA IS CONSTRUCTED USING DOVETAIL JOINTS. SEATS AND BACKREST FORMED BY

CONSTRUCTED IN EARLY AMERICAN STYLE, LEGS ARE STRAIGHT AND SQUARE IN SHAPE. THE SEAT IS A SOLID PIECE OF WOOD AND THE BACKREST IS MADE OF VERTICLE SPLATS. THE SPLAT ON THE SIDE

HAS THREE HORIZONTAL BAR AND NINE VERTICLE BARS BETWEEN THE TWO POST ON THE ENDS. THE FOOTBOARD AND HEADBOARD BOTH HAVE ROLLERS AND THE FINALS ARE ROUND. BEDRAILS THAT

CENTRAL SPLAT AND ONE SUPPORTING BAR TO EITHER SIDE OF IT. THE OUTER SUPPORTING LEGS ARE IN ONE PIECE AND CURVED AT THE UPPER CORNERS. THE BED HAS ROLLERS ATTACHED TO THE ENDS

OUTER SUPPORT RAIL THAT ARCHES AND IS SUPPORTED BY TWO HORIZONTAL RAILS AT THE BOTTOM, IT HAS FIVE VERTICLE RAILS ATTACHED AT THE TOP HALF OF THE OUTER RAIL. THE BED JOINTS ARE WELDED AND THE HEAD BOARD IS ON ROLLERS. THE FOOTBOARD IS MUCH SHORTER THAN THE HEADBOARD IT HAS ONE HORIZONTAL SUPPORT RAIL WITH FIVE VERTICLE SUPPORTS. THE OUTER RAIL WHICH

LIGHT REDDISH FINISH. THE HEADBOARD IS SOLID WOOD WITH A ONE INCH STRIP 6 INCHES FROM THE TOP. THE BOTTOM OF THE BOARD HAS FEMALE CONNECTING JOINTS. THE FOOTBOARD IS MUCH SHORTER THAN THE HEADBOARD. IT HAS TWO 1 INCH STRIPS ACROSS THE TOP FRONT OF THE BOARD. THE BOTTOM OF THE BOARD HAS INVERTED PEDIMENT TO ACCENT THE 1 FOOT WIDE LEGS. THE BOARD HAS

LID PIECES. THE ARMS ARE ROUND AND CURVED AT THE ENDS. THE PEW HAS TWO LEGS WITH 3 INCH

DOORS, IT HAS TWO SHELVES. THE FOUR 8 INCH LEGS BELOW THE CASE ARE "L" SHAPED ON THE INSIDE. IT HAS A MAHOGANY FINISH. THE DOORS LATCHES ARE "T" SHAPED WITH SPRING ACTION

DRAWERS WITH 2 ROUND KNOBS EACH. THE KNOBS SERVE AS DRAWER PULLS. THE TOP OF THE CHEST IS RECTANGULAR SHAPED. IT HAS 4 LEGS ON ROLLERS, THE LEGS HAVE CABRIOLE SHAPE. LEGS ARE

TOP. THE CHEST HAS ONE ARM TO HOLD THE MIRROR UPRIGHT, THE SECOND ARM IS MISSING. THERE

IS A MIRROR FOR THE CHEST. THE CHEST HAS 4 LEGS ON CASTERS, LEGS ARE 8 INCHES IN

WICKER. THERE ARE 4 INVERTED "C" STRETCHERS AND 1 "X" STRETCHER FOR SUPPORT. THE LEGS

WICKER. THE SEAT IS CONSTRUCTED OF UNIFORM WEAVE, WHILE THE BACKREST HAS A VARYING DESIGN. THE CHAIR LEGS ARE ALSO WICKER WRAPPED. IT HAS AN "X" STRETCHER, 2 "C" STRETCHER AND 3 STRAIGHT STRETCHERS. THE LEGS ENDS HAVE METAL TIPS ON THEM FOR STABILITY. THE

AND 4 "C" STRETCHERS FOR SUPPORT. THE REAR POST HAS AN EXTRA STRETCHER IN THE BACK ATTACH-

SETS ACROSS. THE SPRINGS ARE ATTACHED TO THE FRAME. THEY ARE ATTACHED TO EACH OTHER AT THE TOP BY A MAZE OF BURLAP CORDING. THE EDGES ARE TRIMMED WITH A ROUND BAMBOO CANE ATTACHED BY CORDING. IT HAS A BROWN BURLAP COVER OVER THE ENTIRE TOP. THE WOOD IS

ED IN 2 PIECES WHICH FIT TOGETHER TO FORM A SQUARE BOX. THERE IS A DOOR ON THE FRONT SIDE AND A ROUND HOLE IN THE TOP FOR THE PERSON'S HEAD TO COME THROUGH. THE INSIDE IS EQUIPPED WITH MIRRORS AND LIGHT FIXTURES. THE ELECTRICAL WIRING IS PROTRUDING FROM THE BOTTOM REAR OF THE BOX. OVER THE DOOR AND AROUND THE HOLE IN THE TOP ARE TWO WOODEN FLAPS THAT OPEN

TONED STAIN. THE FOUR TABLE LEGS HAVE SPOOL TURNED. THE TABLE TOP HAS ROUNDED EDGES ON

BOTTOM. IT IS ALSO FITTED WITH A PADLOCK AND KEY. IT HAS A DOMED SHAPE LID.

IT HAS FOUR ROLLERS ON THE BOTTOM. IT HAS HANDLES AND THREE CLASPS FOR SECURING THE LID.

PANELS SECURED TOGETHER. ON THE REVERSE SIDE ARE THREE HORIZONTAL SUPPORT BARS.

THE DOOR HAS A BARREL BOLT AFFIXED TO THE EDGES OF THE DOOR, NEAR THE CENTER OF THE EDGE.

THE SIDE OF THE DOOR WITH THE HORIZONTAL SUPPORTS IS A CLOTHES HOOK, HUNG ON THE BOARD.

STRUCTED OF WOOD. THE MANTEL BOARD RUNS THE ENTIRE WIDTH OF THE MANTEL, SIDE SUPPORTS EXTENDS TO THE FLOOR. UNDER THE MANTEL BOARD ARE TWO SHELF SUPPORTS TO HELP KEEP MANTEL BOARD LEVEL. THE WOOD HAS SOME DECORATIVE ROUTING ALONG THE SIDE SUPPORT LENGTHS. THE

GEORGE WASHINGTON CARVER SITTING AT HIS LAB TABLE. THE UPPER HALF OF HIS BODY IS SHOWN.

THE MEDALLION IS CIRCULAR AND THE WOODEN BACKGROUND IS SQUARE. METAL IS MOUNTED FROM THE

THERE IS A RELIEF OF A MONKEY ON THE SPLAT IN THE BACK OF THE CHAIR. THE CHAIR IS CON- STRUCTED OF WOOD STAINED A REDDISH COLOR. THE CHAIR HAS CABRIOLE STYLE LEGS CARVED WITH A RELIEF AT THE TOP. THE CHAIR FRAME IS CIRCULAR SHAPED. THE ARMS OF THE CHAIR ARE CARVED

CARVED DESIGN IS THAT OF A DRAGON. THE ARM RESTS HAVE DRAGON HEAD RELIEFS, THE DRAGON HAS AN OPEN MOUTH WITH JEWELS LODGED INSIDE. THE BACK OF THE SEAT IS CUT IN A CIRCULAR SHAPE.

THE CABRIOLE LEGS ARE ACCENTED WITH A DRAGON HEAD RELIEF.

THERE ARE DRAWERS BENEATH THE TABLE TOP & OPPOSITE EACH OTHER ON TWO SIDES OF THE TABLE.

THE FINISH OF THE TABLE IS A REDDISH STAIN.

PAPERS. THE ENTIRE CARTONNIER IS ORNATELY CARVED. THE EDGE OF THE TABLE AND THE CABRIOLE

LEGS ARE CARVED WITH THE DRAGON HEAD RELIEF THE SAME AS THE CARTONNIER.

THE DESK HAS ONE DRAWER LOCATED IN THE FRONT AND CENTERED BENEATH THE TABLE TOP.

THE DESK HAS A DARK REDDISH FINISH.

THAT FOLDS UNDERNEATH THE SPRINGS. A SINGLE LAYER OF DIAMOND SHAPED WIRE MESH IS

CONNECTED TO THE FRAME HEAD, A FOOT BY SEVERAL SMALL WIRE SPRINGS. SPRINGS ARE CONNECTED

BOARD THAT FOLDS UNDERNEATH THE SPRINGS. A SINGLE LAYER OF RECTANGULAR SHAPED WIRE MESH IS CONNECTED TO THE FRAME HEAD AND FOOT BY SEVERAL SMALL WIRE SPRINGS. ON THE SIDES, THE

AND FOOT BOARD THAT FOLDS UNDERNEATH THE SPRINGS. A SINGLE LAYER OF DIAMOND SHAPED WIRE MESH IS CONNECTED TO THE FRAME HAD AND FOOT BY SEVERAL SMALL WIRE SPRINGS. ALONG THE

AND FOOT BOARD THAT FOLDS UNDERNEATH THE SPRINGS. A SINGLE LAYER OF DIAMOND SHAPED WIRE MESH IS CONNECTED TO THE FRAME BY SMALL WIRE SPRINGS AND SMALL WIRE CLAMPS. THE METAL

HEAD AND FOOT BOARD. THESE HEAD AND FEET BOARDS ARE GOLD UNDERNEATH THE SPRINGS.

A LAYER OF DIAMOND SHAPED WIRE MESH IS CONNECTED TO THE FRAMES BY SEVERAL SMALL WIRE SPRIN CLAMPS. THE WIRE MESH IS CONNECTED ON THE SIDES BY SMALL WIRE CLAMPS. THE METAL FRAMES

BOARD. THEY FOLD UNDERNEATH THE SPRINGS. A SINGLE LAYER OF DIAMOND SHAPED WIRE MESH CONNECTED TO THE FRAME ON ALL SIDES BY SMALL SPRING CLAMPS. THE RECTANGULAR METAL FRAME

THE CENTER AND TWO SMALL BELL SHAPED LAMP SHADES MOUNTED JUST ABOVE A METAL YOKE, WHICH IS WELDED TO A ROUND UPRIGHT METAL POLE. THE POLE IS PAINTED A METALLIC BROWN. THE POLE END

ELECTRICAL WIRE. IT HAS A ROUND PLATFORM FOR MOUNTING TO THE CEILING. ONE LIGHT IS LOCATED AT THE END OF THE POLE, IT HAS NO SHADES, BUT THE FIXTURE BASE IS ROUND AND WILL ACCOMMO- DATE A SHADE. THE SECOND LIGHT IS LOCATED 15" FROM THE END OF THE POLE, ON A VERTICAL PIVOT ARM. THE LIGHT AT THE END OF THE ARM IS ALSO ON A PIVOT, THIS IS HORIZONTAL.

TO SUPPORT THE SPRINGS.

THE RAIL IS EQUIPPED W/2 MALE FITTINGS AT EACH END TO ATTACH TO THE HEAD AND FOOT BOARD.

THERE IS A ROUND METAL BOLT AND A RECTANGULAR CUT IN EACH END OF THE RAILS TO ATTACH THE

SPRINGS. THE ENDS OF THE RAILS ARE IRON AND HAVE MALE JOINTS THAT ATTACH TO THE HEAD AND

FOOT BOARDS. THE RAIL APPEARS TO BE IN THEIR NATURAL COLOR STATE.

A ROUND MAILE BOLT AND A RECTANGULAR CUT AT EACH END OF THE RAIL TO ATTACH THE HEAD AND

A FEMALE ATTACHMENT AT EACH END OF THE RAIL TO CONNECT TO HEAD AND FOOT BOARDS.

MAKING THE LENGTH OF THE ROD ADJUSTABLE. THE ENDS HAVE TWO SMALL HOLES FOR ATTACHING THE

WALL CLAMP. THE INSIDE OF THE ROD IS OPEN. THE ROD IS CONSTRUCTED OF METAL AND IS GOLD

TAINER AND A SMALL WOODBOX ON THE TOP; THESE ARE SIDE BY SIDE, THEY FEED SEPARATELY INTO A METAL HOLDING PAN WHICH HOUSE A METAL HAND CRANKED GRINDER. THE CRANK HAS A PULLEY WHEEL THAT ATTACHES TO THE WOODEN BOX AND THE TIN CONTAINER FOR EQUAL DISTRUBUTION. THERE IS AN ADJUSTING KNOB ON THE SIDE. BELOW THE GRINDER PAN IS AN EXTRACTOR PIPE. THE DEVICE IS

CRANKED GRINDER MOUNTED ON A TRIPOD STYLE STAND. THE MILL IS ATTACHED BY SCREWS AND WELDING. THE HAND CRANK HAS A COMPOUND CURVE AND A WOODEN HANDLE. THE TRIPOD FEET HAVE

center of the frame is a "T" bar used for tightening the press. The foot plate is oval shaped and flat, there is a metal stand inside the press for exact press measurement. The press also has two holes for mounting. The press has two tan painted stripes on either

SUBSTANCES. THE HAND CRANKED CYLINDER IS MOUNTED ON THE TOP OF THE DEVICE CREATING A DOWNWARD MOTION. BENEATH IT IS A DOUBLE HOLDING CYLINDER, ONE ON INSIDE SERVES AS STRAINER AND THE OUTER ONE COLLECTS THE JUICE. THE OUTSIDE CYLINDER HAS AN OUTLIND AT THE

PRESSED UPWARD. ABOVE IT IS A WEIGHTED PLATE MOUNTED TO A VERTICAL POLE WHICH IS MOUNTED ACROSS THE TOP. THE WEIGHTED PLATE AND THE VERTICAL ARM ARE SUPPORTED BY TWO 3 FOOT BOLTS THAT ARE ATTACHED TO THE FOOT PLATE AND SERVES AS A GUIDE FOR THE WEIGHTED PLATE. THE DEVICE HAS A PRESSURE PLATE FOR "HYD. PRESS LB. PER SQ. INCH" AND "LOAD IN LBS. ON 1 1/4.

DISKS. IT ALSO HAS 3 SMALL FAUCETS TO RELEASE THE EXTRACTIONS. ON THE RIGHT HAND SIDE OF THE ROUND WHEEL FOR TIGHTENING THE SIX DISKS. ON THE LEFT SIDE NEXT TO THE FUNNEL IS A HAND OPERATED PRESSURE JACK. THIS APPARATUS IS MOUNTED TO A RECTANGULAR METAL PLATE THAT

THE WHEEL IS CONNECTED TO TWO FLYWHEELS THEN TO THE TWO HORIZONTAL ROUND CYLINDERS. ONE OF THE CYLINDERS IS LARGE AND THE OTHER SMALLER. THE CYLINDERS ARE VERY CLOSE TOGETHER, ONLY THIN OBJECTS COULD GO BETWEEN. THESE CYLINDERS ARE MOUNTED UPON TWO WIDE METAL LEGS WITH TWO STRAIGHT BAR STRETCHERS FOR SUPPORT.THESE LEGS ARE RESTING ON A WOODEN 2" X 4"

INSIDE OF A HANDMADE WOODEN TABLE. THE PRESS HAS A LARGE COG AT THE BOTTOM, A METAL ROD EXTENDING FROM IT THROUGH THE TABLE TOP AND ABOVE TO A DISTANCE OF 7 1/2 " ATTACHED TO THE

INCLUDES A ROUND WHEEL CRANK WITH WOOD HANDLE; TWO FLY WHEELS, A HOLDING PAN AND THE GRINDER. THERE IS A TIN EXTRACTION OUTLET ON THE BOTTOM LEFT SIDE WHICH LEADS TO THE CABINET BELOW. INSIDE THE CABINET IS A TIN PAIL TO CATCH THE GROUND SUBSTANCES. THE GRINDER WAS PAINTED DARK RED, THE CABINET IS STAINED WITH REDDISH WOOD STAIN, CABINET HAS

REMOVABLE; THE NECK PORTION HAS A GRADUATED WEIGHING ARM ON A PEDESTAL EXTENDING OUT TO THE RIGHT. THIS SCALE CAN WEIGH OBJECTS UP TO 44 LBS.. THE SCALE IS PAINTED BLACK WITH AN ORANGE AND GOLD PIN STRIPE ALONG THE EDGE AND OTHER SERIES OF DECORATION IN THE FOUR

BELL IS ROUND IN SHAPE, IT CROWN IS EXTENDED INTO A "C" SHAPE ROCKER ARM AND PULLEY LEVER.

THIS IS ATTACHED TO THE BELL AT THE TOP BY A NUT AND BOLT. THE HEAD IS ALMOST FLAT, THE CLAPPER IS ROUND AND IS ATTACHED TO THE BOTTOM OF THE BOLT THAT HOLDS THE ROCKER ARM IN

BOTTOM. IT HAS FOUR SHORT LEGS SITUATED IN A 45 DEGREE ANGLE OUT AND DOWN FROM THE STAND.

THE BACK SUPPORT IS A RELIEF OF A FLOWER INSIDE OF A FLOWER STAND. THE EXTREME TOP OF THE STAND FORMS AN ARROWHEAD WITH A ROW OF FLOWERS ALONG THE OUTER EDGE. IN THE MIDDLE OF THE

CONNECTED TO A ROUND BASE. IT HAS A ROUND 1 1/2" PIPE EXTENDING VERTICALLY. AT THE TOP OF THE PIPE IS A SMALL HOLE TO CONNECT AN EXTENSION OR A LAMP TOP. THE LAMO BASE HAS A

BASE WITH A ROUND HEAD THAT HOUSED A SMALL ROD EXTENDING 35 1/2 INCHES VERTICALLY, THE

SIZED HOLES IN THE TABLE TOP FOR HOLDING ROUND OBJECTS. THE ROUND HOLE HAS A SMALL CUT IN

THE SIDE OF EACH. HOLES APPEAR TO BE USED TO KEEP THE BEAKER OR FLASKS LEVEL.

THE STAND IS PUT TOGETHER WITH SCREWS WITH TONGUE AND GROOVE CONNECTING SYSTEM.

IN A GRADUATION CAP AND GOWN WITH CERTIFICATE IN HAND. THE RELIEF IS CARVED ON A

RECTANGULAR BACKGROUND. HIS RIGHT HAND IS CLUTCHING THE GOWN IN THE CENTER, THE RELIEF IS

CARVED ON LIGHT GRAIN WOOD AND FINISHED A LIGHT RED STAIN.

RELIEF BACKGROUND IS FORMED BY 4 BOARDS FUSED TOGETHER.

INSIDE, CROSSING HORIZONTALLY AND MADE OF SMALL BAMBOO STICKS. THERE ARE SEVERAL VERTICAL BAMBOO STICKS COVERED BY LAYERS OF STRAW. THE HAT IS LIGHT BROWN IN COLOR AND APPEARS TO

HAVE A CLEAR COATING ON THE OUTER SURFACE OF THE STRAW FOR PROTECTION.

COULD BE DONE WITH FOUND OBJECTS. THE SQUARE IS WOVEN FLAT, IT HAS NATURAL COLOR TO HEM EXCEPT FOR DECORATIVE STRIPS THROUGH THE MIDDLE. ONE SIDE IS MORE SMOOTHLY WOVEN THAN THE OTHER AND APPEARS TO BE THE RIGHT SIDE. THE STRIPES ARE FADED ON THIS SIDE. ON REVERSE

ed rod, the handle is screwed in at the top and is straight. The poker is constructed of

FRONT END, THE TOP OF THE SHAFT HAS A BALL TOP, THE BASE IS A PYRAMID, IT HAS A HORIZONTAL bar which makes a small L-shape curve and then it forms a right angle and extends straight it is mounted upon two small legs and is connected by screws. It is constructed of wrought

VERTICAL SHAFT SURMOUNTINGS THE FRONT END, THE TOP OF THE SHAFT HAS A BALL TOP, THE BASE is a pyramid. It has a horizontal bar which makes a small L-shaped curve and it then forms a right angle and then extends straight. The horizontal bar is mounted upon two small legs

three legs. There are two handles for handing or carrying. There is a ring along the outside diameter of the pot. The mouth of the kettle is smaller than the body diameter.

IT IS RESTING UPON THREE SHORT LEGS, IT ALSO HAS AN OVAL SHAPED HOLE FOR THE SMOKE VENT.

two leg sections and top. It has a decorative design along the edges of the top and on the sides of the legs. The bench is white in color, underneath the bench is grooved to

Steffen Thomas. Is hollow on the inside, Carver appears to have on a suit, there is A SMALL FLOWER BLOSSOM IN HIS LEFT LAPEL, THE ARMS OF THE SUBJECT ARE SHOWN ONLY TO MIDWAY

The top has a hold for removing the display, it has four glasspanel sides, and wooden framework. The case has a light mahogany stain and was constructed using nails. One of the

the box is square in shape. The sides are small wire mesh, the top overlaps the sides by an inch, there is a hasp at the bottom indicating that a bottom door was attached. The box

FOUR LEGS. THE TOP HAS TWO HOLES, ONE EYE IN FRONT FOR COOKING AND A HOLE FOR THE EXHAUST IN THE TOP REAR, THE FRONT OF THE STOVE HAS A DOOR FOR LOADING FUEL ON TOP AND ANOTHER ON the bottom for grading and cleaning the ash. The stove is black in color, there is also a

completely encircled by the wooden frame, finished with a dark stain. The frame has a LARGE PEDIMENT AT THE TOP, ALONG WITH CARVED DESIGNS IN THE WOOD AREA ON ALL SIDES OF THE MIRROR, MIRROR IS RECTANGULAR IN SHAPE, SLIGHTLY OVALED AT THE TOP AND SQUARED AT THE

PLOW HAS A 24" HANDLE, THE DIGGING IMPLEMENT IS SHAPED IN THE FORM OF A BIRD'S HEAD, IT IS round at the top with a beaklike protrusion. The wooden base is oval at the top and square at the bottom. The base has a small one inch strip of wood along its edges. The plow is

to waist including the full arm span. Dr. Carver has on a suit, necktie and apron. There IS A FLOWER IN THE LEFT LAPEL, HIS HANDS ARE SLIGHTLY EXTENDED OUT FRONT HOLDING SOME peanuts, as if he were studying these objects. The bottom portion of the rear of the bust was not constructed. The bust is resting upon a wooden box stand, with the inscription

and round. On the neck of the bottle is a yellow strip of tape of frabic with green leaves painted on it, below it are four bunches of grapes around the bottle. Below the grapes AND ON THE BODY OF THE CNTAINER IS A PURPLE AND GREEN FLOWER ARRANGEMENT PAINTED ONTO THE

mounting the device. The sharpener has a small removable drawer for catching the shavings There is a wooden knob on the end of the handle that turns the sharpener, a device that

the lid is pink, white and trimmed in gold. There is a white diamond shaped design trimmed in gold underneath the handle on top. The lid is white underneath and has a rim to fit

the lid is pink, white and trimmed in gold. There is a white diamond shaped design trimmed in gold underneath the handle on top. The lid is white underneath and has a rim to fit

on the front each having a pane of glass in the center. The bookcase is constructed in such a way that the mid-section extends outward 2 1/2 inches. The doors have small round knobs and holes for keys. There are 8 small turned legs underneath. There are four shelves

two story log structure with a rock chimney. It has a front door on the extreme right FRONT SIDE, AND A SMALL WINDOW DIRECTLY ABOVE IT ON THE SECOND FLOOR, THERE IS A LARGE chimney on the right side of the house. There is a window on the ground level on the left, and a door directly above it on the second floor. The roof has wooden shingles.

in the front center and a window on either side of it. There is a large stone chimney on BOTH THE RIGHT AND LEFT SIDE, THE REAR SIDE OF THE HOUSE HAS THE SAME ARRANGEMENT OF DOORS and windows. The roof has brown wooden shingles, the house is painted gray. House is resting upon a cement slab. This is a replica of the house where Booker T. Washington

metallic handle and glass lid to fit. Its contents includes one large rutabaga and the fluid covering it, a mixture of ethyl alcohol and glycerine. There is a slight scratch on

THE CENTER PORTION IS IN A CIRCULAR PATTERN.

APPROXIMATELY 6 CM FROM EDGE IS A WEAVING WITH ONE STRAND OF FIBER FORMING A SERPENTINE.

EIGHT ROWS OF FIBER FORM AN OUTSIDE BAND, FOUR OF THESE ARE DYED 2 BLACK, 1 RED, 1 GREEN.

metal clamp device for holding the lid on the jar. Jar is cylindrical in shape with a slight concave bottom bottom and wider rim at top upon which the lid rests. The lid is slightly dome shaped. Imprinted into glass of the lid is " Philadelphia New York Whitall Tatum June 11, 1895". The metal clamp goes across top of jar and has a screw device that

clamp device for holding the lid on the jar. Jar is cylindrical in shape with a slightly concave bottom and wider rim at the top, upon which the lid rests. The lid is slightly domed. Imprinted on lid is " Philadelphia New York Whitall Tatum Co. Pat June 11 1895 ".

The metal clamp goes across top of jar and has a screw device that tightens the lid to jar

clamp device for holding the lid on the jar. Jar is cylindrical in shape with a slight concave bottom and wider rim at the top upon which the lid rests. The lid is slightly dome shaped. Imprinted on the lid is "Philadephia New York Whitall Tatum Co. Pat June 11 1895 " The metal clamp goes across top of jar and has a screw device that tightens the lid to the

A SOLID SECTION MAKES UP THE MIDDLE, WOVEN COILS, WITH A DECORATIVE LOOPED EDGING.

clamp device for holding the lid on the jar. Jar is cylindrical in shape with a slight concave bottom and wider rim at the top upon which the lid rests. The lid is dome shaped.

The imprinting on the lid reeds "Philadelphia New York Whitall Tatum Co. Pat June 11, 1895". The metal clamp goes across top of jar and has a screw device that tightens the lid

consists of a portion of cloth with 2 straps to go across shoulders. The section is hemmed

filigree. Base is wide at the bottom with 3 round feet and narrows toward top. Circular rack is built on top of lamp for holding shade. Shade is constructed of thin metal with same finish as base. It has 9 jewel shaped inserts of glass arranged on its dome shaped surface. Lamp has a pull chain to turn off and on, and threadbare electrical cord attached

veining. Block has an identification for pens to lie lenghtwise at the front. On either end is marble holder for ink bottle. At center is a small round dish for paper clips or pen nibs. This dish is removable. Inside the holders are 2 glass ink wells, each having a brass crown shaped lid. There is a brass band for the center bowl attached to the stand.

clamp device for holding the lid in place. Jar is cylindrical in shape with a slight concave bottom and wider rim at the top upon which the lid rests. The lid is slightly dome shaped. Imprinted into glass of the lid is " Philadelphia New York Whitall Tatum Co. Pat JUNE 11, 1895" THE METAL CLAMP GOES ACROSS TOP OF JAR AND HAS A SCREW DEVICE THAT CLAMPS

to a point at the upper end. The writing end of the pen is made of gold colored metal with

clamp to hold lid on jar. Jar is cylindrical in shape with a slight concave bottom and wider rim at top upon which the lid rests. The lid is slightly domed shaped. Imprinted in the lid is "Philadelphia New York Whitall Tatum Co. Pat June 11, 1895". The metal clamp goes across the top of jar and has a device to tighted the lid to the jar. Jar contains

cup. cup engraved "To Booker T. Washington YMCA Buxton, Iowa Lewis E. Johnson Gen'l Sec'y On opposite side is engraved "Directors WH Reeves, W H London, Benj Tate, E T Mills, C H N

clamp device for holding the lid in place. Jar is cylindrical in shape with a slight concave bottom and wider rim at top on which the lid rests. The lid is slightly dome shape Imprinted on the lid "Philadelphia New York Whitall Tatum Co. Pat June 11, 1895. The metal clamp goes across top to hold lid in place. Jar contains single turnip in fluid of alcohol

raised design of flowers and leaves. These have been painted using red and green with metallic gold accent. The background color is teal blue. The base is found at the base,

clamp to hold lid in place. Jar is cylindrical in shape with a slightly concave bottom…