ATT_2_MIMA_189409_PRODUCT_INFORMATION.pdf

Rehabilitate Stedman Buttrick House (North Bridge Visitor Center)

MIMA

PMIS 189409

Product Information

December 20, 2018

NATIONAL PARK SERVICE – NER / HACE

Northeast Region

Historic Architecture, Conservation, and Engineering Branch

ALUMINUM PIPE AND TUBE

The ACOM SYSTEM has been developed to meet the more stringent code demands of IBC and State building codes. It is fully customizable, and can be configured to meet other specialized demands as required. The simple, modular design insures easy setup and the ability to reconfigure and relocate the system.

• complies with: IBC, NBC, CABO, OSHA, Florida SREF, Texas TAS , ANSI, ADA

• 10 year warranty

• non-combustible

• heavy duty welded aluminum construction

• bidirectional knurled tread forms a rugged skid resistant surface

• non-combustible

• 3 handrail options: 42" guardrail, 38" handrail, 38" 2 line rail

• special manufacturing to meet needs beyond the modular system

SIZE TYPE WEIGHT CAPACITY

5'4" W x 5'4" L platform 100 psf

48" W x 5' L in-line platform 100 psf

48" W x 5' L ramp 100 psf.

ABOUT PRODUCTS FAQ LITERATURE CONTACT US

Page 1 of 2AlumiRamp : Armada System

8/30/2017http://www.alumiramp.com/pages/acom.html

Our Ramps

Product Information

Rent by the Day or Longer

Installed in Days

Free Estimates

ADA Compliant

Fireproof

Unique No-Slip Surface

Special Event Ramps

Commercial Ramps

Ramp FAQ

How to Care for your Ramp

Quarterly Newsletter

Our Customers

Residential

Caregiver

Case Manager

Healthcare Professional

Insurance Company

Veteran or Military

Government/Municipal

Community Organizations

Special Event Coordinator

Facilities Managers

Builder/Renovator

Our Products

Modular Ramps

Inclined Stair Lifts

Vertical & Inclined Platform Lifts

Portable Roll-in Showers

Portable Ramps

Threshold and Entry Ramps

Overhead Patient Lifts

Pool Lifts

Grab Bars

Automatic Door Openers

PromenAid Railings

Keep projects open and accessible during construction and renovations Commercial Wheelchair Ramps, Stairs, Walkways, Surfaces, Wheelchair Lifts and Railings

Amramp access ramps, walkways, stair systems and wheelchair lifts can be delivered and installed quickly from our 50+ locations coast to coast by our local installation teams – union, open shop or prevailing wage rate.

Wheelchair Ramps

• RENT or Buy – No minimum size, elevation or rental period

• ADA/ABA/IBC compliant – all local code configurations available – steel or aluminum

• Provides safe, code compliant access during your project

• Environmentally friendly

• Fireproof steel construction provides safe emergency means of egress

• Amramp durable, non-skid mesh surface is safer than wood, aluminum or concrete. Open pattern design allows moisture to pass through to prevent puddles, mold or ice from forming, keeping the ramp safe in all weather conditions

Amramp provides long-term or short-term access for all types of construction projects: office trailers, expansions, renovations, or access to your job site.

Amramp keeps your commercial property accessible and fully compliant.

We have installed temporary ramps at Disneyland while one of their restaurants was renovated, as well as for the Crown Center in Kansas City, Harvard University, The Smithsonian Museum, Walter Reed Army Medical Center and lifts at Mardi Gras in New Orleans, Duke University, as well as at various churches, schools and more across the country.

When Boston's historic Faneuil Hall Mall was undergoing elevator changes, Amramp installed a 174 ft. wheelchair ramp up to the second floor shops. Without the ramp, the shops on the second floor would have had to close during the elevator change. Read more about Amramp commercial applications here.

Request a FREE estimate for your next project

888-715-7598 Speak to a Local Ramp Expert Now!

Funding Sources | Blog | Media Gallery | Franchise Opportunities | Contact Us | Search:

About Us Our Products Rent or Buy Quick Installation Customer Testimonials Request Information

Page 1 of 2Commercial Wheelchair Ramps | Amramp

9/4/2018http://www.amramp.com/site/commercial

Boston Walk-In Bath and Stairlift Company offers Portable and Modular aluminum wheelchair ramp systems.

We are proud to offer ramps that are American made. Our modular and portable wheelchair ramp systems are strong, durable, and are affordable enough to make it the best alternative to provide quality functional access to many areas.

Designed to address the accessibility needs of the residential and light commercial market, our Ramp Systems are an excellent choice when accessibility is needed.

Made of aluminum, unlike wood that may be treated with toxic chemicals or steel that is subject to rust and decay, aluminum has excellent corrosion resistance and is environmentally friendly. They are architecturally designed for a clean, low maintenance, modern appearance and have weight capacities as high as 850 lbs. Their permanent non-skid surface and rust-free aluminum construction make them perfect for our brutal New England winters.

Features & Benefits Modular Wheelchair Ramps Modular Ramps are as customizable and unique as every situation needing one. Modular Ramps can be easily installed and there is little to no site preparation required.

• 850 pound weight capacity

• 36” width (standard)

• 48” and other custom widths available

• Meets ADA wheelchair ramp specifications, guidelines and requirements

• Fastest and Easiest modular handicapped ramp installation.

• Easy to configure an ADA modular wheelchair ramp system for almost any site

• Modular Ramps and platforms made of lightweight aluminum that does nor rust, rot or decay

• All components feature captured fasteners with no hazardous nuts or bolts protruding onto the usable ramp area

• Permanent skid resistant ramp surface

• Virtually maintenance free

• Independently adjustable supports legs

• 36″ usable width wheelchair ramp (48″ available)

Please call us at (781) 229-0072 today to arrange a FREE home evaluation.

© 2013-16 Boston Walk In Bath & Stairlift Company. All Rights Reserved Site Design By: Arch Creative Group

ALUMINUM RAMPS

STAIRLIFTS WHEELCHAIR ACCESS TUBS

& SHOWERS

WALK IN BATHTUBS ALUMINUM RAMPS

STAIRLIFTS

WHEELCHAIR ACCESS TUBS & SHOWERS

WALK IN BATH TUBS

ALUMINUM RAMPS

ACCESS SHOWERS

CONTACT US

PH. (781) 229-0072 | FAX (978) 274-2606

INFO@BOSTONWALKINBATH.COM

HOME ABOUT US WHY US TESTIMONIALS FINANCING CONTACT

Page 1 of 1ALUMINUM RAMPS | Boston Walk In Bath & Stairlift - New England Walk In Bath Installations

10/10/2018http://bostonwalkinbath.com/aluminum-ramps/

Commercial & Industrial ADA Wheelchair Ramp

ADA / UBC / IBC Commercial & Industrial Ramps

Our commercial / industrial aluminum wheelchair ramp system meets ADA, IBC and UBC standards. The information below, and on subsequent pages, should address any questions you may have about the construction and commercial viability of our wheelchair ramp system. In the event that you cannot find the information you're looking for or if you need a quote for a ramp system, you can call us at 1-877-258-7423 and we'll do our best to get you what you need. All commercial ramp projects will come with submittals for your building dept. as well as with drawings for footer placement should they be required.

Stamped drawings are also available for an additional fee. You can E-Mail drawings for your project to us or fax them to 303-703-4879. If you do not have a drawing and need assistance with your layout just give us a call and we'll design one for you based on your specific needs.

See more photos of the commercial ramp & stair system.

-Aluminum extrusions are either 6061-T6, 6063-T52, or 6005-T5 aluminum alloy.

-Aluminum sheet material is 5052-H32.

-All mechanical fasteners are 18-8 stainless steel.

-Walking surfaces are designed to carry a uniform live load of 100 pounds per square foot and a concentrated vertical load of 300 pounds in an area of one square foot.

-Ramp sections are fabricated in typical 8’ and 10’ lengths. Custom lengths can be fabricated as requested.

-Commercial ramp clear width between the handrails is 48" with a 60" outside to outside dimension. (custom widths are available) -Wheelchair ramps can be of any length to meet ADA compliance, a resting platform is required for every 30' of ramp.

-Meets all code requirements for load specifications.

-Ramps can be designed in an endless number of Layout Configurations.

-Wheelchair ramps, platforms and stairs are ADA, IBC and UBC compliant.

In order to provide you with site specific commercial ramps that meet your design criteria and code requirements, online ordering for commercial wheelchair ramps is not available.

Please call 1-877-258-7423 for a quote or with help configuring your ramp.

Tues, Sept 04, 2018

Home

Ramps

Modular with Handrails

Commercial Ramps

Single-Fold

Multi-Fold

Solid

Bariatric

Utility

Threshold

Ontrac

Vehicle

Door Openers

ADAEZ - Battery-Electric

Pneumatic Commercial

Pneumatic Residential

Silent Compressor

Door Controles

Activation Push Buttons

Wireless Push Buttons

Wireless Kits

Transmitters, Receivers, etc.

IR & Microwave Sensors

Bollard Posts

Accessories

Terms / Privacy Policy

About Disability Systems

CALL - 1-877-258-7423

HOME AUTOMATIC DOORS RAMPS DOOR CONTROLS CONTACT

Page 1 of 2Commercial ADA Wheelchair Ramps

9/4/2018http://www.disabilitysystems.com/ramps/commercial-ramps.html

This product meets the following codes:

ADA IBC OSHA

TITAN™ Code Compliant Modular Access System Provide public access to businesses, stadiums, and public buildings such as libraries and museums with the TITAN™ Code Compliant Modular Access System. This all-aluminum ramp system is durably designed for high-traffic use and meets guidelines for ADA, IBC, OSHA, and local codes. Eliminate hazardous stairs, inclines, curbs, and elevated landings by combining ramps, platforms, and steps to create the ideal system for your needs. Its field-proven modular design can be configured to fit most applications. Powder coating is also available.

To purchase, please contact us at 877-751-1867.

We use cookies to ensure that we give you the best experience on our website. You can adjust your cookie settings at any time if you wish.

I love cookies! Please do not show this message again

Page 2 of 10Titan Modular Ramp System Public Access | EZ-ACCESS

9/4/2018https://www.ezaccess.com/commercial/public-access/titan-code-compliant-modular-access-system

For Layouts and Drawings See Drawings Tab Below

Product Features

This product resides in the following industries:

Commercial Industrial

Extruded Tread:

Welded, extruded tread provides reinforced strength and a permanent slip-resistant surface.

High-quality Aluminum:

Aluminum is naturally corrosion-resistant and non-combustible, allowing years of maintenance-free use.

Easy to Install:

The TITAN’s pre-fabricated design allows quick installation and can easily be reconfigured or relocated as needed.

Custom Configurations:

Site-specific stamped drawings available.

Quick Ship:

Standard configurations ship within 24-hours to help eliminate costly delays.

Made in the USA and is warranted for 3-years.

Gallery Specifications Drawings Options Documents

Gallery

We use cookies to ensure that we give you the best experience on our website. You can adjust your cookie settings at any time if you wish.

I love cookies! Please do not show this message again

Page 3 of 10Titan Modular Ramp System Public Access | EZ-ACCESS

Specifications

Drawings

Options

Documents

We use cookies to ensure that we give you the best experience on our website. You can adjust your cookie settings at any time if you wish.

I love cookies! Please do not show this message again

Page 4 of 10Titan Modular Ramp System Public Access | EZ-ACCESS

Safety for your stair railing in an easy to install format

(Shown: Round Aluminum Hand Rails)

Handrail Systems Hand rails are an important part of making your ramp or stairs friendly for those who need assistance. Fortress Railing Products offers two hand rail systems, square and round.

Features & Benefits Quick and easy installation

100% recyclable (Aluminum)

Superior performance in strength and safety

ADA Compliant (Aluminum)

Brackets and Adapters allow for installation at virtually any angle

Use with wood, composite, vinyl or Fortress Railing Products metal posts

HO ME

A BOUT

( / ABOU T/ )

IN SPIRAT ION GA LL ERY

( / INSPIRA TIO N_GALLERY /)

PROD UCT S

( /PRO DUCT S/ )

IN STRUCTIO NS

( / INST AL LA TION INST RUCT IONS / )

BLO G

( /BL OG/ )

CONT ACT

(/ CON TAC T

WHERE TO BUY (/LOCATOR/) FIND AN INSTALLER (/INSTALLERLOCATOR/)

TM

TM

Page 1 of 4Handrail Systems - Fortress Railing

9/4/2018https://www.fortressrailing.com/products/handrail-systems/

Premium Finish Handrails are available in 4 premium textured finishes to provide you with even more ways to customize your railing to your unique design aesthetic. And these finishes offer more than just style—each one is engineered to withstand the elements.

G L O S S B L A C K W H I T E A N T I Q U E B R O N Z E

B L A C K S A N D

Product Gallery (/Inspiration_Gallery/)

VIRTUALLY MAINTENANCE FREE

Safe, Durable and Virtually maintenance free

Use the Fortress Railing Products Handrail system to integrate with our Fortress™ Railing product lines to create a safe, durable yet beautiful stair installation on your project. Our coating process is the same as our other products as well as the color match is perfect. Have the peace of mind in knowing it will not only be safe but long lasting and virtually maintenance free.

TM

Page 2 of 4Handrail Systems - Fortress Railing

9/4/2018https://www.fortressrailing.com/products/handrail-systems/

Free Assessment Locations Resources About Contact

Commercial Want to Get Started?

There are many ways in which commercial ramps can improve the safety of your business or facility in CT, MA, MN, RI or WI. Available in a variety of styles and sizes, our ADA compliant ramps can make your commercial property accessible for all visitors or patrons. Commercial ramp systems serve all individuals equally, including those with limited mobility who are in need of a wheelchair, crutches, scooter, walker, or cane. Ramps can also reduce falls, which in turn decreases liability.

Need a temporary ramp? Lifeway Mobility can sell and install the best ramp for your application – and then we’ll buy it back when no longer needed.

Commercial ramp benefits:

Contact Us Today

Stair Lifts Ramps Showers and Tubs Lifts

Bath Safety Elevators ShopIndoor Straight (Elan)

Indoor Straight (Elite)

Indoor Curved (Elite)

Outdoor Straight

Outdoor Curved

Portable Ramps

Residential Modular Ramps

Commercial Modular Ramps

Accessible Showers

Bath Transfer

Tub Cut-Outs

Walk-In Tubs

Wheelchair Lifts

Transfer Lift Systems

Grab Bars

Bathroom Seats and Benches

Support Pole Systems

Savaria Infinity

Savaria Eclipse

Savaria Telecab

Savaria Vuelift Round

Wessex Home Elevator

Page 1 of 5Commercial Aluminum Ramps in CT, MA, MN, RI and WI | Lifeway Mobility

10/10/2018https://lifewaymobility.com/ramps/commercial-modular-ramps/

Commercial wheelchair ramps can be rented for events or temporary needs, such as graduations. On construction sites, modular aluminum ramps can offer a temporary yet safe accessibility solution for workers and patrons alike.

Modular ramp systems can also be purchased and installed for municipal buildings, such as schools, universities, churches, museums, arenas, and restaurants. Aluminum modular ramps are an excellent alternative to high-maintenance wood ramps. Commercial handicap ramps can provide safe and easy access for all visitors, regardless of their mobility needs.

Our ADA compliant commercial ramps include:

We offer a wide range of commercial-grade, ADA-compliant portable and modular ramps that can be customized for your needs.

Affordability options include new, short-term rental, rent-to-own, and refurbished. Lifeway Mobility can visit your site and make recommendations on the wheelchair ramp that will fit your needs, building style, and site conditions. Our CAPS- and CEAC-certified

ADA compliant

Continuous handrails for safety

Adjustable heights and slopes available

Strong, durable, rust-free construction

No maintenance necessary

In-stock options available

Professional, timely installation within days

Affordable options (new, short-term rental, rent-to-own, and refurbished)

Modular ramp systems

Custom aluminum ramps (solid, mesh, or powder-coated to match the aesthetic of your building)

Page 2 of 5Commercial Aluminum Ramps in CT, MA, MN, RI and WI | Lifeway Mobility

10/10/2018https://lifewaymobility.com/ramps/commercial-modular-ramps/

Ravens News

Fixed Pier, gangway to a custom boat house and dock in

Orlando.

Support Our Troops http://www.woundedwarriorproject.org/

Members Of

Better Business

Bureau

Florida Marine

Contractors

Association

Copyright © 2014, Ravens Marine. All rights reserved. Ravens Marine, Inc. 3295 Orange

Avenue Kissimmee, FL 34744 Ph: 800-676-3023 Ph: 407-935-9799 Fax: 407-935-9436 Email:

matt@ravensmarine.com

Page 1 of 5Ravens Marine - Products

10/30/2018http://www.ravensmarine.com/products/

Gangway Images | Drawings/Specs |

Ravens first adjustable gangway was ordered by the US Navy 20 years ago. Since then we have built over 200 for the Navy and the US Coast Guard. Their application is not limited to government agencies as we have manufactured them for the average homeowner when conditions do not allow a standard gangway to be used.

What makes the adjustable step gangway special is the feathering steps that allow them to stay level at low or high tide. They are ideal when the angle is too great for a flat gangway to be used.

The adjustable step gangway is still fabricated with aluminum to keep the weight manageable and the cost realistic. We can help you determine if an adjustable step gangway is right for you so call now!

Adjustable Step Images

Ravens aluminum dock ladders are made from 6061-T6 marine grade aluminum pipe which are impervious to salt or fresh water applications. From standard to special we cover it all at an affordable price. Order 1 ladder or 100, each one is made with the same quality and durability that Ravens Marine is known for.

Ladder Images

Did you know that Ravens Marine manufactures some of the finest handrail systems available? We offer aluminum handrails for standard dock applications as well as specialty handrails for state or federal governments. Whether you require round or square tube Ravens can engineer and manufacture and deliver handrail to any place in the world. Call today and find out how Ravens can help you with your handrail requirements.

Handrail Images

Page 3 of 5Ravens Marine - Products

10/30/2018http://www.ravensmarine.com/products/

Aluminum Wheelchair Ramps Help You Meet ADA

Guidelines

The REDD Team Universal Wheelchair Ramp System provides ADA compliant wheelchair access to portable and modular buildings. With its ease of mobility, long life cycle, and modular aluminum components this system is simple to relocate and reconfigure according to your need.

The REDD Team Universal Wheelchair Ramp System, along with its counterpart the Universal Stair, can provide you with safe and low maintenance wheelchair accessibility solutions.

Technical Specs

Installation Instructions

• 34″ Vertical Picket Guardrail

• 38″ Vertical Picket Guardrail

• 42″ VP Guardrail & 34″ Handrail & 23″ Child Rail

• 38″ Vertical Picket Guardrail & 26″ Child Rail

• 42″ Vertical Picket Guardrail & 34″ Guardrail

Drawings

• 34″ Two Line Rail Ramp Configurations

• 38″ Vrtcl Pckt & 26″ Child Rail Ramp Configuration

• 38″ Vrtcl Pckt Rail Ramp System Configuration

• 42″ Vrtcl Rl, 34″ Rl & 23″ Child Rl Ramp Config

• 34″ Vertical Picket Rail Ramp Configurations

• 38″ Two Line Rail Ramp Configuration

• 42″ Vrtcl Pckt Rail & 34″ Rail Ramp Configuration

Features

• ADA compliant access for portable classrooms and site built or modular buildings.

Universal Wheelchair

Ramp System

Universal Stair

Systems

Universal Walkway

Systems

Universal Viewing

Platforms

Universal Generator

Access Systems

Dura-Grip OSHA

Aluminum Stairs

Dura-Grip General

Code Stairs

Flex-Step OSHA

Aluminum Stairs

OSHA Crossover

Stairs

Aluminum Porches

Aluminum Pedestrian

Bridges

Page 2 of 5Aluminum Wheelchair Ramp | REDD Team

9/4/2018http://www.reddteam.com/aluminum-wheelchair-ramp.html

• Smooth, continuous handrails and a slip resistant walking surface for safe and easy access.

• Durable aluminum is virtually maintenance free for exceptional value over a long life cycle. Aluminum is non-corrosive and non-combustible.

• Adjustable heights and slopes available for versatility in permanent or re-locatable installations.

• Fast and easy installation – No field welding required!

• Modular design is re-locatable and reconfigurable for the best value in a handicapped ramp system.

• Minimal assembly for a fast installation.

• Each unit warranted for wear and durability.

• Meets ADA guidelines!

Universal Ramp System – Codes Met

• ADA

• IBC

• LIFE SAFETY 101

Photos

Page 3 of 5Aluminum Wheelchair Ramp | REDD Team

9/4/2018http://www.reddteam.com/aluminum-wheelchair-ramp.html

Copyright 2016 - Sebago Metal Fab / Designed & Maintained by Logik-Ops

Home About Products Service Contact

Accessibility Needs

Whether on land or in the water we are your accessibility ramp specialists. Our aluminum portable, modular ramps are designed to maximize your accessibility and independence.

We also provide accessible, residential and commercial railings, guardrails, and other safety accessories including gates, support bars, and bracing.

Page 1 of 1ADA Ramps

10/10/2018http://www.sebagometalfab.com/adaramps.html

BABY-CHANGING STATIONS

KOALA KARE PRODUCTS

KB200 HORIZONTAL WALL MOUNTED

BABY CHANGING STATION

KB200-00 CREAM

KB200-01 GREY

KB200-05 WHITE GRANITE

KB200-11 EARTH

353/16” (894 mm)

19 11/16” (500 mm)

18 5/32” (461 mm)

42¼” (1,073 mm) to floor

3¾” (95 mm)

16” (406 mm) between holes

Floor

KB200 TECHNICAL DATA SHEET

Floor

Floor

4½” (114 mm)

19 11/16” (489 mm) liner dispenser dimensions when attached

16” (406 mm)

42¼” (1073 mm) from top mounting hole to floor

5½” (140 mm)

3¾” (95 mm)

33” (838 mm) to changing surface

29¼” (743 mm) from bottom of bed to floor

35 3/16” (894 mm)

22¼” (565 mm)

44” (1118 mm) from floor to handle area located on both sides of unit.

23 3/16” (589 mm)

28¾” (730 mm) from bottom of closed bed to floor

MATERIALS:

FDA approved injection-molded polypropylene with Microban® antimicrobial additive embedded into the bed surface. Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is 450 sq. in (2903 sq. cm) and comes complete with nylon safety strap and bag hooks.

Dual cavity liner dispenser holds approximately 50 KB150-99 bed liners.

OPERATION:

Concealed pneumatic cylinder and metal mounting chassis provides controlled, slow opening and closing of bed. Polypropylene is easy to clean and resists odors and bacterial growth.

Complies with ASTM static load performance requirements when properly installed.

Warning: To ensure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturer’s instructions.

SPECIFICATION:

Baby changing station body shall be durable, injection-molded polypropylene. Design of unit shall be surface-mounted. Unit shall be equipped with a pneumatic cylinder for controlled opening and closing of bed. Bed shall be secured to metal mounting chassis with a concealed steel-on-steel hinge. No hinge structure shall be exposed on interior or exterior surfaces. Unit shall have mounting hardware included. Unit shall have Microban® antimicrobial embedded into plastic material on the changing surface. Unit shall comply with ADA regulations when properly installed. Bed shall have smooth concave changing area with a nylon safety strap and two hooks for bags or purses. The design and manufacture of Koala products is intended to be compliant with the 2010 ADA Standards for Accessible Design and the 2009 ICC A117.1, Accessible and Usable Buildings and Facilities. Unit shall conform to ASTM F 2285-04 Standard Safety Performance Specification for Diaper Changing Tables for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, EN 12221:2008, TUV Certified, ASTM G22 Antibacterial standards or local code if more stringent installation requirements are applicable for Barrier-Free accessibility.

Unit shall have a built-in Liner Dispenser for use with 3-ply chemical free biodegradable bed liners, instructional graphics and safety messages in 4 languages. Optional Braille label is available. Unit shall be backed by manufacturer’s 5-year limited warranty on materials and workmanship and include a provision for replacement caused by vandalism. Unit shall be manufactured in the U.S.A.

INSTALLATION:

To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. Installer should account for the space that a unit occupies when in the down position and with the caregiver (whether standing or seated) in front of the unit. Locate the unit so that paths of travel are maintained around it when being used.

1. Remove changing station from the shipping container and check for any freight damage.

If damage is found, please call Koala Kare Products’ Customer Service at 888.733.3456. Remove “Installation Kit” and “Operator Kit” from box. Please give “Operator Kit” to facility manager or operator. Box should contain two pieces: the bed and metal mounting chassis and the wall mount liner dispenser. Identify the best location for installing the unit.

2. Remove the bed and chassis from the box and select the wall area where the unit will be installed. Make sure you have taken into consideration the operating clearance of 9½” (241 mm) on both sides of the exposed chassis and 23 3/16” (589 mm) from wall surface when open.

For Wood Stud Wall- Measure from the floor 42¼” (1073 mm) on stud center and mark the wall.

The mounting holes are designed for 16” (406 mm) stud centers. Ensure the locations you have marked for the mounting holes are level before drilling. Drill pilot holes for keyhole mounting using a 1/8” regular drill bit. If the wall has wooden studs that are not on 16” (406 mm) centers, you will need to use toggles to secure one side of the unit. The other side should be secured to the stud using the screws provided. You must allow for space inside the wall for the toggles to turn. This will vary depending on the toggles used.

For Masonry or Tile over Stud Wall- Use a 7/32” (5 mm) masonry drill bit for the pilot hole until you hit the stud. Change bit to 1/8” (3 mm) regular drill bit.

For Metal Stud or Concrete Block- If the wall has metal studs or an underlying surface of concrete block, you will need to use toggles to secure one side of the unit. The other side should be secured to the stud using the screws provided. You must allow for space inside the wall for the toggles to turn. This will vary depending on the toggles used.

3. Screw two of the mounting screws into the pilot holes leaving ¼” (6 mm) exposed to allow keyhole slots to be easily mounted over the screw heads. Place chassis over screws. After securing the unit using the keyhole slots, verify that the unit is level. Tighten top two screws so that they are flush with the wall. Use the four lower holes as a guide to mark and drill pilot holes.

Use remaining four screws and four washers to complete installation of bed and metal mounting bracket. Insert washers over lower four screws. All SIX screws and four washers must be mounted to the chassis.

4. Ensure liner dispenser is free from damage. Remove key, unlock, and open liner dispenser lid. This will expose liner dispenser mounting holes. Line up dispenser mounting holes onto chassis and secure with the four screws provided. Close and lock the liner dispenser door.

5. Clean work area and inspect unit to ensure it opens and closes smoothly. Give Operator Kit and key to the facility operator. Replacement parts and additional liners can be purchased from your local distributor or by calling Koala at 888.733.3456 or 303.539.8300.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice.

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399 www.koalabear.com

P/N AB005 November 2018

AMERICAN SPECIALTIES, INC.

441 Saw Mill River Road, Yonkers, NY 10701

(914) 476.9000 • (914) 476.0688 www.americanspecialties.com

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

SURFACE MOUNTED HORIZONTAL BABY CHANGING STATION (PG 1 of 2)

MODEL №: 9014

ISSUED: 08/13

REVISED: 5 Aug 2014

SPECIFICATION

Surface Mounted Baby Changing Station shall be horizontal format and shall protrude no more than 4” (102) from wall when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, ASTM F2285-04, and

EN 12221-1. Unit shall support a static load of 300 lbs. (136.1 kg) and be tested in excess of 350 lbs. (158.8 kg).

Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM

G22. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be as-sembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit shall be light grey in color and shall be recyclable at end of usable life. Unit shall be warranted for five

(5) years against defects in material or workmanship.

Surface Mounted Horizontal Baby Changing Station shall be Model № 9014 as manufactured by American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913

(914) 476.9000 • (914) 476.0688 www.americanspecialties.com

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

INSTALLATION

Installation instructions along with operation and maintenance manual are provided with each unit. Unit is surface mounted using hardware supplied through recessed mounting holes. Hardware kit supplied has fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained. Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading. Mounting hole plug covers are supplied to conceal fasteners after installation.

For compliance with 2010 ADA Accessibility Standards, install unit so that top edge of changing table is 30-1/4" above finished floor (AFF). See installations instructions packed with unit.

1. Locate wall studs at 16” [406] OC for fastening the station. If two (2) wall studs cannot be used, use two (2) screws into

ONE stud and drill pilot holes and install toggle fasteners securely in the wall at non-stud location.

2. Attach unit to wall studs with four (4) 1/4” x 3” long Phillips pan head self-tapping screws through flat washers.

3. Where wall studs are not available attach with four (4) 1/4” - 20 x 3” pan head bolts with flat washers into toggles or expansion nuts.

OPERATION

Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use. Unit is operable with less than 5lb of force (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners. Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until re-leased by opposing finger pressure by adult caretaker/parent. Liners/towels are easily replenished by service personnel as required.

SURFACE MOUNTED HORIZONTAL BABY CHANGING STATION (PG 2 of 2)

MODEL №: 9014

ISSUED: 08/13

REVISED: 5 Aug 2014

KOALA KARE PRODUCTS

KB101 VERTICAL WALL MOUNTED

BABY CHANGING STATION

KB101-00 CREAM

KB101-01 GREY

KB101-05 WHITE GRANITE

KB101 TECHNICAL DATA SHEET

62½” (1588 mm) from floor

35” (889 mm)34”

(864 mm) from floor

5¼” (133 mm)

F i n i s h f a c e o f w a l l

9¼” (235 mm)

35½” (902 mm)

22¾” (578 mm)

3½” (89 mm)

22” (559 mm)

16” (406 mm)

Floor

3” (76 mm)

59” (1499 mm) from floor

MATERIALS:

FDA approved blow-molded high-density polyethylene with Microban® antimicrobial.

Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included. Molded in graphics & safety messages in six languages and Braille. Contoured changing surface area is 420 sq. in (2730 sq. mm) and comes complete with nylon safety straps and two bag hooks.

OPERATION:

Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene is easy to clean and resists odors and bacterial growth. Complies with ASTM static load performance requirements when properly installed. Molded-in liner dispenser holds approximately 25 KB150-99 sanitary liners.

Warning: To ensure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturer’s instructions.

SPECIFICATION:

Baby changing station body shall be durable, high-density polyethylene with Microban® antimicrobial. Design of unit shall be surface-mounted. Unit shall be equipped with a pneumatic cylinder for controlled opening and closing of bed. Bed shall be secured to back plate with a concealed, full-length steel-on-steel hinge.

No hinge structure shall be exposed on interior or exterior surfaces. Unit shall have 11-gauge steel mounting plates with mounting hardware included. Unit shall have Microban® antimicrobial embedded into plastic material. Unit shall conform to ANSI S117.1 Accessible and Usable Buildings and Facilities, ASTM F 2285-04 Standard Safety Performance Specification for Diaper Changing Tables for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, ASTM G21 Antifungal, ASTM G22 Antibacterial standards or local code if more stringent installation requirements are applicable for barrier-free accessibility. Unit shall comply with ADA regulations when properly installed. Bed shall have smooth concave changing area with a nylon safety strap and two hooks for bags or purses. Unit shall have a built-in Liner Dispenser for use with 3-ply chemical free biodegradable sanitary liners, universal instruction graphics and safety messages in 6 languages and Braille. Unit shall be backed by manufacturer’s 5-year limited warranty on materials and workmanship and include a provision for replacement caused by vandalism. Unit shall be manufactured in the U.S.A.

jglassman Highlight

INSTALLATION:

To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight, and can accommodate the supplied installation hardware.

Drilling holes and mounting the station:

1. Remove the station from the shipping container and check for any freight damage.

Identify the best location for installing the baby changing station. Hold the unit in place, open the bed, and make sure that there is adequate operating clearance.

2. Based upon the type of wall on which the unit will be mounted, determine the best method of mounting. Not all of the included hardware may be required for proper installation.

3. The vertical unit has four mounting holes provided in the back wall of the unit, which are positioned on a 16” (406 mm) stud center. If possible, locate the wood or metal wall studs for fastening the changing station in the desired location. If the walls do not have studs on center as outlined, make sure at least one side of the unit is installed into the stud. Use toggles (may need to purchase) for holes on the other side.

4. Find the stud where you will be attaching the left side of the changing station to the wall.

Measure 59” (1499 mm) up from the floor, at the center of the stud, and mark the wall. Line up the top left mounting hole with this mark, then use a measuring tape and level to mark the remaining three mounting holes. This will locate the bottom of the station 27” (686 mm) from the floor and the top of the bed at 34” (864 mm).

5. If the wall has wood studs on 16” (406 mm) centers, drill 1/8” (3 mm) pilot holes at the marks and use the four 1/4“ x 3” (6 mm x 76 mm) panhead tapping screws with supplied washers. If the wall is masonry or tile over wood studs, use a 7/32” (6 mm) masonry drill until you hit the stud, then proceed to drill 1/8” (3 mm) pilot holes into the studs and use the four 1/4” x 3” (6 mm x 76 mm) screws with supplied washers.

6. If the wall has wood studs that are not on 16” (406 mm) centers, has metal studs or an underlying surface of concrete block, drill with a ½” masonry bit. (You may have to purchase toggles before installing.) You must allow a minimum of inside wall space for toggles to turn depending on toggles used. Insert and tighten toggles.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice.

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399 www.koalabear.com

KB101 TDS December 2010

(914) 476.9000 • (914) 476.0688 www.americanspecialties.com

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

SURFACE MOUNTED VERTICAL BABY CHANGING STATION (PG 1 of 2)

MODEL №: 9015

ISSUED: 08/13

REVISED: 9 Oct 2014

SPECIFICATION

Surface Mounted Baby Changing Station shall be vertical format and shall protrude no more than 4” (102) from wall when in retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static load of 300 lbs. (136.1

kg) and be tested in excess of 350 lbs. (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protec-tion safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be con-cealed after installation using color matched recess plug-covers supplied. Unit shall be light grey in color and shall be recyclable at end of usable life. Unit shall be warranted for five (5) years against defects in material or workmanship.

Surface Mounted Vertical Baby Changing Station shall be Model № 9015 as manufactured by American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913

(914) 476.9000 • (914) 476.0688 www.americanspecialties.com

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

INSTALLATION

Installation instructions along with operation and maintenance manual are provided with each unit. Unit is surface mounted using hardware supplied through recessed mounting holes. Hardware kit supplied has fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained. Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading. Mounting hole plug covers are supplied to conceal fasteners after installation.

1. Locate wall studs at 16” [406] OC for fastening the station. If two (2) wall studs cannot be used, use two (2) screws into

ONE stud and drill pilot holes and install toggle fasteners securely in the wall at non-stud location.

2. Attach unit to wall studs with four (4) 1/4” x 3” long Phillips pan head self-tapping screws through flat washers.

3. Where wall studs are not available attach with four (4) 1/4” - 20 x 3” pan head bolts with flat washers into toggles or expansion nuts.

OPERATION

Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use. Unit is operable with less than 5lb of force (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners. Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent. Liners/towels are easily replenished by service personnel as required.

SURFACE MOUNTED VERTICAL BABY CHANGING STATION (PG 2 of 2)

MODEL №: 9015

ISSUED: 08/13

REVISED: 9 Oct 2014

CERAMIC TILE

FLOOR | WALL

AFFINITY™

GLAZED PORCELAIN FLOOR, GLAZED CERAMIC WALL & MOSAIC with REVEAL IMAGING®

CREAM AFO1

CREAM AFO1

CREAM AFO1

BEIGE AF02

BEIGE AF02

BEIGE AF02

GRAY AF03

GRAY AF03

GRAY AF03

BROWN AF04

BROWN AF04

BROWN AF04

GLAZED PORCELAIN FLOOR TILE

GLAZED CERAMIC WALL TILE 2 x 2 GLAZED CERAMIC MOSAIC

SIZES

Thickness Sq. Ft.

per Carton

Pieces per Carton

18 x 18 Floor Tile

(17-13/16" x 17-13/16") (45.20 cm x 45.20 cm) 5/16" 17.60 8

12 x 24 Floor Tile

(11-13/16" x 23-13/16") (30.00 cm x 60.48 cm) 3/8" 15.60 8

12 x 12 Floor Tile

(11-13/16" x 11-13/16") (30.00 cm x 30.00 cm) 5/16" 14.55 15

10 x 14* Wall Tile

(9-13/16" x 13-15/16") (24.99 cm x 35.40 cm) 5/16" 14.25 15

2 x 2 Mosaic* (Dot-mounted on 12" x 24" Sheet)

(12" x 24" Sheet) (30.48 cm x 60.96 cm Sheet)

1/4" 24.00 12

* Ceramic

INSTALLATION

Grout Joint Recommendation Shade Variation

Floor: 3/16" (overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.

When multiple sizes are installed in a modular pattern, please specify same size caliber at time of order)

Wall: 1/16"

Mosaic: 1/8"

High (V3)

TEST RESULTS

ASTM# Floor Result

Wall Result

Mosaic Result

Water Absorption C373 < 0.5% < 20.0% < 3.0%

Breaking Strength C648 > 275 lbs 120-230 lbs > 250 lbs

Scratch Hardness MOHS 8.0 4.0-6.0 8.0

Chemical Resistance C650 Resistant Resistant Resistant

Abrasion Resistance C1027 3 (AF04)

4 N/A 3 (AF04)

For additional information, visit daltile.com/information/TestResults.

NOTES

Special consideration must be given when installing tiles 20" and larger. Please refer to daltile.com/LargeTiles for more information.

Use of a latex modified thin-set is recommended for installation.

Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

For additional information refer to “Factors to Consider” at daltile.com/Factors.

FLOOR APPLICATIONS

(Excludes Wall Tile) Target DCOF wet Suitable

Dry & Level – Interior N/A

Wet & Level – Interior ≥ 0.42 *

Exterior Applications;

Pool Decking & Other Wet Areas with Minimal Footwear

≥ 0.60

Ramps & Inclines ≥ 0.65

A DCOF value of ≥ 0.42 is the new standard for tiles specified for commercial application in standard A137.1–2012, Section 9.6. It replaces the SCOF value of ≥ 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest™, visit www.daltile.com/dcof.

OTHER APPLICATIONS

Suitable

Walls/Backsplashes

Countertops **

Pool Linings ***

APPLICATION NOTES:

* Mosaic only. Mosaic also suitable for residential and light commercial shower floors.

** Floor tile and mosaic only

*** Mosaic only

Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

Wall tile & mosaic suitable for exterior wall applications in non-freezing climates only when proper installation methods are followed.

TRIM

Type Number Size Pieces per Carton

Bullnose ✝ P-43C9 3 x 12 30

Wall Bullnose § S-4310 (10" side) 3 x 10 54

Wall Bullnose Corner § SN-4310 3 x 3 32

✝ Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.

§ Glazed ceramic

FLOOR | WALL

AFFINITY™

GLAZED PORCELAIN FLOOR, GLAZED CERAMIC WALL & MOSAIC WITH REVEAL IMAGING®

7834 C. F. Hawn Freeway, Dallas, Texas 75217 | 1.800.933.TILE

To view the complete collection of Daltile® products and information, visit our website at daltile.com.

DESIGNED TO HELP EARN LEED™

CREDITS. For more detailed information, visit daltilegreenworks.com. ©2016 Daltile (11/16)

SCAN QR CODE

FOR PRODUCT

INFORMATION

Get a QR Code reader at:

GET.DALTILE.COM

Generated by BeQRious.com

FLOOR | WALL

PARKWAY™

GLAZED CERAMIC with REVEAL IMAGING®

BEIGE PK96

BEIGE PK96

GRAY PK98

GRAY PK98

BROWN PK97

BROWN PK97

CREAM PK95

CREAM PK95

FIELD TILE

WALL TILE

SIZES

Thickness Sq. Ft.

per Carton

Pieces per Carton

18 x 18 Floor Tile*

(17-1/2" x 17-1/2") (44.45 cm x 44.45 cm) 5/16" 17.04 8

12 x 12 Floor Tile*

(11-13/16" x 11-13/16") (30.00 cm x 30.00 cm) 5/16" 14.55 15

12 x 24 Floor Tile

(11-9/16" x 23-3/8") (29.40 cm x 59.30 cm) 3/8" 15.04 8

9 x 12 Wall Tile

(9" x 12") (22.91 cm x 30.54 cm) 5/16" 11.25 15

6 x 6 Wall Tile

(6" x 6") (15.20 cm x 15.20 cm) 5/16" 12.50 50

* This product is manufactured regionally. Slight variances in size and shading may occur between regions. Please contact your sales representative to verify carton square footage. As with all tile projects, be sure to purchase sufficient quantities with your initial order.

Floor tile sizes are not intended to be modular.

TEST RESULTS

ASTM# Floor Result Wall Result

Water Absorption C373 < 7.0% < 20.0%

Breaking Strength C648 > 250 lbs. 120-230 lbs.

Scratch Hardness MOHS 7.0 4.0-6.0

Chemical Resistance C650 Resistant Resistant

Abrasion Resistance C1027 3 N/A

For additional information, visit daltile.com/information/TestResults.

FLOOR APPLICATIONS

(Excludes Wall Tile) Target DCOF wet Suitable

Dry & Level – Interior N/A

Wet & Level – Interior ≥ 0.42

Exterior Applications;

Pool Decking & Other Wet Areas with Minimal Footwear

≥ 0.60

Ramps & Inclines ≥ 0.65

A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

OTHER APPLICATIONS

Suitable

Walls/Backsplashes

Countertops *

Pool Linings **

APPLICATION NOTES:

* 9 x 12 wall tile not suitable for countertops

** 6 x 6 wall tile only

Suitable for exterior applications in non-freezing climates only when proper installation methods are followed.

TRIM

Type Number Size Pieces per Carton

Floor Bullnose* S-43C9 3 x 12 20

Wall Bullnose S-4669 6 x 6 50

Wall Bullnose Corner SCRL-4669 6 x 6 50

Wall Bullnose S-4309 3 x 9 54

Wall Bullnose Corner SN-4309 3 x 3 32

Quarter Round A106 1 x 6 152

Quarter Round Corner UC106 1 x 1 40

*Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.

FLOOR | WALL

PARKWAY™

GLAZED CERAMIC with REVEAL IMAGING®

7834 C. F. Hawn Freeway, Dallas, Texas 75217 | 1.800.933.TILE

To view the complete collection of Daltile® products and information, visit our website at daltile.com.

DESIGNED TO HELP EARN LEED™

CREDITS. For more detailed information, visit daltilegreenworks.com. ©2016 Dal-Tile Corporation (6/16)

SCAN QR CODE

FOR PRODUCT

INFORMATION

Get a QR Code reader at:

GET.DALTILE.COM

Generated by BeQRious.com

NOTES

Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.

Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require…