A06_Specifications.pdf
PDF 161 KB Posted
- Attached to
- 7 LAKES FENCE REPAIR
- Solicitation number
- 140LL027Q0034
- Issued by
- Not on record
About this file
This document is a Material Specifications sheet for the 7 Lakes 2026 Fence project, specifying requirements for a 4-wire wildlife-friendly fence and gates. The specifications detail materials required including barbed wire (two 12-1/2-gauge galvanized strands twisted together with 2-point barbs spaced 4 inches apart, minimum breaking strength 950 lb-force, conforming to ASTM A 121), barbless wire (identical construction without barbs), wood stays (42 inches tall, 2.5-4 inch diameter), steel fence posts (ASTM A 702, painted green with white or silver tops, "T" bar type, minimum 1.33 lb/ft weight with clip-type wire fasteners), and wood posts and braces (6-inch nominal diameter, acceptable species including Ponderosa pine, Lodgepole pine, fir, and tamarack, all treated posts free of bark with square-cut ends).
The work data sheet specifies a 4-wire configuration with barbed top wire at 40 inches, barbed wire at 28 inches and 22 inches, and smooth barbless bottom wire at 16 inches above ground level. Line post spacing is 16 feet 6 inches with stays spaced 16 feet 6 inches apart (one between each post section). Wood posts shall be set 6 feet 6 inches in length with 2 feet 6 inches depth in ground, while steel posts shall be 5 feet 6 inches in length with 1 foot 6 inches depth in ground. The project includes four 12-foot wire gates with wood stays. Wood treatment shall follow AWPA C 1 standards using chromate copper arsenate waterborne preservative with minimum 0.4 pounds per cubic foot retention via full-cell pressure treatment. Suppliers must submit written material approval to Andy Skordas (askordas@blm.gov) at the Rawlins Wyoming BLM Field Office prior to shipment and provide assay reports from independent testing laboratories for all treated wood products, with minimum five-inch borings taken from each bundle of 50 posts.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A06_Drawings.pdf | ||
| A04_SOW.pdf | ||
| A06_Maps.pdf | ||
| Sol_140LL027Q0034.pdf | ||
| B03_DBA_Wage_Determination.pdf | ||
| Bid_Schedule.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Material Specifications
7 LAKES 2026 FENCE
Specifications
A. Barbed Wire: A strand of two 12-1/2-gauge galvanized wires twisted together with 2-point barbs of 14-gauge wire spaced 4-inches apart. Wire and barbs shall be zinc-coated steel, with a zinc coating of at least 0.3 oz/ft2 of coated surface area. The minimum breaking strength of each wire shall be 950 lb-force. The barbed wire shall conform to ASTM A 121.
B. Barbless Wire: A strand of two 12-1/2-gauge galvanized wires twisted together. Wire shall be zinc-coated steel wire of at least 0.3 oz/ft2 of coated surface area. The minimum breaking strength of each wire shall be 950 lb-force. The barbless wire shall conform to ASTM A 121.
C. Wood Stays: Sound single stem wood stays must be straight and plumb. Wood stay dimensions shall be 42in. tall with a diameter of 2.5in.-4in..
D. Steel Fence Posts: ASTM A 702; painted green with white or silver tops "T" bar type, with a welded or riveted anchor plate. Furnish with clip-type wire fasteners (punched tabs for fastening wires are not acceptable). Steel posts shall be manufactured from wrought, rail, or new billet steel, and shall have a minimum weight of 1.33 lb/ft. The anchor plates shall weigh a minimum of 0.67 pounds +5 percent, be a minimum of 18 square inches in area, and be 18-inches from the bottom of the post. The posts shall be 5.5’ in length for the Doty Badwater Phase II Fence. The posts shall be 8’ in length for the Doty Sandhills Fence.
E. Wood Posts and Braces:
1. Acceptable Wood Posts: Sound single-stem members. A slight bend in one plane is acceptable. Posts may be full stem members, sawed members of square cross section, or split members (western red cedar only). Nominal diameter for treated posts shall be 6-inches. The following species will be acceptable:
Ponderosa pine, Lodgepole pine, fir, and tamarack. All treated posts shall be free of bark with ends cut square. All wood posts shall be 6.5’ in length for the Doty Badwater Phase II Fence. All wood posts shall be 8’ in length for the Doty Sandhills Fence.
2. Basis for Rejection: Posts are not acceptable when sweep causes a straight line joining the center of the top to the center of the butt to fall outside the body of the post, or at point 2-inches or more from the center of the post. Posts that are charred, twisted, rotted, or excessively bent are not acceptable. Seasoning checks, single or opposite each other with a sum total equal to or more than 1/2 the thickness of the post are not acceptable.
3. Wood Treatment Practices: General: The following treatments may be used.
Treatment method shall be in accordance with AWPA C 1.
1. Chromate Copper Arsenic Method: chromate copper arsenate, waterborne preservative (conforming to Type B in AWPA 5) shall be applied. Minimum net retention of solid preservative shall be 0.4 pounds per cubic foot (gauge only) using the full-cell pressure treatment process.
2. Assay Report: The Supplier shall furnish an assay report, for all treated wood products, from an independent testing laboratory to the Contracting Officer. A minimum of five inch boring shall be taken from each bundle of 50 posts as samples for the assay report.
A written submittal for all materials shall be submitted for approval to Andy Skordas (askordas@blm.gov) Rawlins Wyoming BLM Field Office prior to shipping the products. Contact Andy Skordas with any questions 307-320-5714.
mailto:askordas@blm.gov
WORK DATA SHEET
For
SECTION 02824 – FOUR WIRE FENCES AND GATES
Fence type: 4-Wire Wildlife-Friendly Fence & Gates
Type of top wire: Barbed
Type of intermediate wires: Barbed
Type of bottom wire: Smooth/Barbless
Wire locations/dimensions in inches:
D: Barbed - TOP WIRE _ 40”
C: Barbed 28”
B: Barbed _22”
A: Smooth_- BOTTOM WIRE_16”
GROUND LEVEL__________________
All Line post spacing (L): 16 ft 6 inches
Stay spacing (l): 16 ft. 6 inches (1 between each 16.5’ post section)
Length of wood set posts (H2): 6 ft 6 inches
Depth of wood set posts in ground (H2): 2 ft 6 inches
Length of steel posts (H3): 5 ft 6 inches
Depth of steel posts in ground (H3): 1 ft 6 inches
Fence stays will be used in this fence.
Number of wire gates: 4 (12 feet Wire w/ wood stays)
File details come from the government source that posted it. Updated .