Att11_Amendment_One_Changes_0001.pdf
PDF 90 KB Posted
- Attached to
- NIFC 440 BOISE AIR CENTER CONSTRUCTION
- Solicitation number
- 140L0624R0059
About this file
This document is an Amendment to a Solicitation for a construction project at the NIFC 440 Boise Air Center. The key changes included are:
- A revised Electrical Legend, Notes and Abbreviations sheet (E-001) dated 8/19/2024.
- The addition of two new specification sections under Division 28 - Electronic Safety and Security: Section 281000 - Access Control and Section 283100 - Addressable Fire Alarm System.
- Updates to Specification Section 271000 - Structured Cabling, including the addition of RG-6/U Type CMP and CL2P cabling requirements.
- Clarification that the switches specified on sheet E-401 Keyed Note 10 shall be 48-port Cisco switches with PoE++, redundant power supplies, a 4-port 1Gig SFP network module, a Cisco DNA license, and the latest IOS Base OS.
The original Solicitation Number is 140L0624R0059 for the NIFC 440 Boise Air Center Construction project, issued by the Department of the Interior Bureau of Land Management National Office.
View the file
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Department of the Interior
BUREAU OF LAND MANAGEMENT
Fire and Aviation
3833 S Development Ave
Boise, Idaho 83705-5354
Amendment One August 20, 2024
140L0624R0059 NIFC 440-Boise Air Center
The following information and clarifications shall be included as part of the contract documents for the above noted construction project:
1. Replace Sheet E-001 – Electrical Legend, Notes and Abbreviations with REVISED Sheet
E-001 dated 8/19/2024, attached.
2. Add DIVISION 28 – ELECTRONIC SAFETY AND SECURITY Specification Section to the Specification Manual for this solicitation, attached.
a. Section 281000 – Access Control
b. Section 283100 – Addressable Fire Alarm System
3. Change Specification Section 271000 – STRUCTURED CABLING as follows:
a. Add 2.5.D - RG-6/U Type CMP and CL2P
1. No. 18 AWG, solid copper conductor
2. Plenum rated
3. Gas-injected, foam-PE insulation
4. Shielded with 100% aluminum shield and 60% aluminum braid
4. Add the following information to sheet E-401 Keyed Note 10:
a. Switches shall be 48 port CISCO with POE++802.3bt, redundant power supplies, a 4 port 1 Gig SFP network Module, a Cisco DNA license, and the lates IOS Base OS.
--end---
File details come from the government source that posted it. Updated .