Atch_5_NBFFCC_Quar_RTU_Removal-Dwgs_2018-1218.pdf

3 MB Posted

Attached to
REHAB BLACKFOOTED FERRET CENTER
Solicitation number
140F0619R0028
Issued by

About this file

From the source

Atch 5 NBFFCC Quar RTU Removal-Dwgs 2018-1218

View the file

Other files

File Type Posted
Atch_19_Pre-Bid_Questions-NBFFCC_2016-0822_(2).pdf PDF
Sol_140F0619R0028_Amd_0003.pdf PDF
Sol_140F0619R0028_Amd_0002.pdf PDF
Atch_12_Bid_Schedule_Worksheet_Rev_1.xlsx XLSX spreadsheet
Atch_11_NBFFCC_Rehab_Past_Perf_Quest_Rev_1.doc DOC document
Atch_18_PreProposal_Conf_Sign_In_Sheet.pdf PDF
Sol_140F0619R0028_Amd_0001.pdf PDF
Atch_17_B11_PRE-Proposal_AGENDA.pdf PDF
Atch_16_PreProposal_Questions-NBFFCC_2016-0819.pdf PDF
Atch_14_Geotech_Report-NBFFCC_2001-4010.pdf PDF
Atch_15_Geotech_Report-NBFFCC_2015-0416.pdf PDF
Atch_9_NBFFCC_Rehab_DBA_Wage_Det_Building_CO.pdf PDF
Atch_8_NBFFCC_Original_2004_Breeding_Bldg_HVAC_Rehab-Dwgs.pdf PDF
Sol_140F0619R0028.pdf PDF
Atch_13_NBFFCC_Rehab_Notice_to_Offerors.doc DOC document
Atch_10_NBFFCC_Rehab_Submittals.pdf PDF
Atch_6_NBFFCC_Breeding_Bldg_HVAC_Rehab-Dwgs-FINAL.pdf PDF
Atch_12_NBFFCC_Rehab_Bid_Schedule.xlsx XLSX spreadsheet
Atch_2_NBFFCC_Specs_Roof.pdf PDF
Atch_3_NBFFCC_Breeding_Bldg_HVAC_Rehab-Specs-FINAL.pdf PDF
Atch_11_NBFFCC_Rehab_Past_Perf_Quest.doc DOC document
Atch_1_NBFFCC_Facility_Rehab_Specs.pdf PDF
Atch_7_NBFFCC_Pens_Drawings.pdf PDF
Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Affected work area above

The area of roof to be repaired is roughly 36' along the eave and 21'-6" up the rake (true distance) for about 775 SF of roof area.

Remove roofing, underlayment, and any damaged roof sheathing as needed. Provide and install new roof sheathing to match existing, ice and water shield, roofing underlayment and metal roofing to match existing.

Remove and replace ridge and ridge vent as needed to tie into existing roofing as well as the new roofing replacement.

Affected work area above

Remove and replace ridge and ridge vent as needed to tie into existing roofing as well as the new roofing replacement.

Remove RTU's, platform and walkway.

Repair roof trusses and roof sheathing as needed after removal.

Approximate area of roof work, see note on A1.4

Remove RTU's, platform and walkway.

Repair roof trusses and roof sheathing as needed after removal.

Replace gutter as needed

Provide and install new screened intake hood on roof. The return air duct on MAU-1 is to be used as a fresh air intake.

Refer to notes on sheet M2.2

Remove RTU's, platform and walkway.

Repair roof trusses and roof sheathing as needed after removal.

Remove and replace ridge and vent vent as needed to allow to tie into new and existing roofing.

Roofing, underlayment and roof sheathing replacement/repair.

Remove and replace gutter as needed to allow to tie into new and existing roofing.

needed after removal.

Remove and replace ridge and vent vent as needed to allow to tie into new and existing roofing.

Roofing, underlayment and roof sheathing replacement/repair.

needed after removal.

Roofing, underlayment and roof sheathing replacement/repair.

Provide and install new screened intake hood on roof. The return air duct on needed after removal.

Provide and install new screened intake hood on roof. The return air duct on

Remove gas and water lines that serviced the removed RTU's. Remove piping back to the branch and cap there.

Remove electrical branch circuits lines back to the panelboard. Remove abandoned conduit, boxes, etc. which serviced the removed RTU's.

File details come from the government source that posted it.