ABQ_RDA_Bard_Unit1_0002.jpg

This is a manufacturer's specification sheet for SARD Manufacturing Co., Inc., detailing electrical heating and cooling equipment. The document provides technical specifications for four heater models: HJ78H2-800, HJ78H2-815, HJ80H2X4XX, and HJ78H2-815, all featuring approved heater packages with single and dual circuit designs. Each model includes rated voltage (230/208V or 240/208V), amperage, phase specifications, and circuit breaker requirements ranging from 30 to 60 amperes.

The unit is assembled in the U.S.A. and carries serial number 404L1330G252B-02, with all motors thermally protected per specifications. Key operational parameters include electrical ratings of 1/2 to 2 horsepower, optional LRA (Locked Rotor Amperage) ratings, and heating capacity measured in KW. The specification sheet notes factory refrigerant R410A at 448 PSI high and 236 PSI low design pressure, and specifies maximum outlet air temperature of 200 degrees Fahrenheit. Unit casing features 1/4-inch clearance for installation, with maximum outlet air temperature of 200 degrees Fahrenheit and water outlet temperature of 120 degrees Fahrenheit. The document includes Intertek certification (3158040) and ARI certification, confirming compliance with ASHRAE/IESN 90.1-2010 standards for commercial applications. Installation notes indicate suitability only for BARD heater packages and warn against use of alternative heater packages due to warranty and safety considerations.