Amdmt 1_Reference D_FEMA Submittals.pdf

CODOM CONSTRUCTION LLC

61 Calle José Martí 201, Urb. Floral Park San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 03

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045

Agrológico y Veterinario de Dorado Fecha: 10/22/2021 Núm. Subasta: 21-1980

Copias Fecha Descripción

1 10/22/21 Submittal #008

(Paint)

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

hecto Stamp hecto Stamp hecto Stamp

Submittal Transmittal Contract No: 2022-055045

#008 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Description: Type: General

Paint

Specifications Reference or Drawings:

Technical Specifications

Variations (Equal/Substitution):

Remarks: Attn:

Ing. Ricardo A. Lugo

Received By:

Date:

Contractor here by certifies that:

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication processes or techniques of construction; and for coordination of the work of all trades.

October 22, 2021

Signature: ________________________________ Date: ________________________________

Gilbert López Díaz, P.E.

101.02A

SuperPaint®

Interior Latex Flat A86 Series

CHARACTERISTICS

SuperPaint Interior Latex is for use on previously painted, bare or primed wallboard and wood, and primed plaster, masonry and metal. SuperPaint paint and primer in one provides fast & easy application, while offering excellent hide and durability.

Color: Most Colors To optimize hide and color development, always use the recommended P-Shade primer

Coverage: 350-400 sq. ft. per gallon @ 4 mils wet;

1.5 mils dry

Drying Time, @ 77°F, 50% RH:

Touch: 1 Hour Recoat: 4 Hours

Drying and recoat times are temperature, humidity, and film thickness dependent

Finish: 0-5 units @ 85°

Tinting with CCE only:

Base: oz. per gallon:

Strength:

Hi Refl White 0-7 SherColor Extra White 0-7 SherColor Deep Base 4-12 SherColor Ultradeep base 10-12 SherColor

Extra White A86W01151 (may vary by color)

V.O.C. (less exempt solvents):

less than 50 grams per litre; 0.42 lbs. per gallon

As per 40 CFR 59.406 Volume Solids: 38 ± 2% Weight Solids: 55 ± 2% Weight per Gallon: 11.37 lbs Flash Point: NA Vehicle Type: Vinyl Acrylic Shelf Life: 36 months unopened

COMPLIANCE

As of 10/10/2019, Complies with:

OTC Yes OTC Phase II Yes SCAQMD Yes CARB Yes CARB SCM 2007 Yes Canada Yes LEED® v4 & v4.1 Emissions No LEED® v4 & v4.1 V.O.C. Yes EPD-NSF® Certified No MIR-Product Lens Certified No MPI® Yes

APPLICATION

Apply at temperatures above 50°F.

No reduction needed.

Brush:

Use a nylon/polyester brush.

Roller:

Use a 3/8 to 3/4 inch nap synthetic cover.

For specific brushes and rollers, please refer to our Brush and Roller Guide.

Spray—Airless Pressure 2000 p.s.i.

Tip .017-.021 inch

APPLICATION TIPS

Make sure product is completely agitated (mechanically or manually) before use.

Priming and application of two coats at the recommended film thickness can help where hiding of a previous coating or application to new drywall is a factor.

SPECIFICATIONS

SuperPaint Interior Latex can be used directly over existing coatings, or bare drywall, plaster (cured with a pH of less than 9), masonry (cured with a pH of less than 9) and non-bleeding wood.

Block:

1 coat Loxon Acrylic Block Surfacer 2 coats SuperPaint Interior Latex Drywall:

Self-prime use 2 coats of SuperPaint Interior Latex or 1 coat Premium Wall and Wood Primer 2 coats SuperPaint Interior Latex

Masonry:

1 coat Loxon Concrete and Masonry Primer 2 coats SuperPaint Interior Latex

Plaster:

Self-prime use 2 coats of SuperPaint Interior Latex or 1 coat Loxon Concrete and Masonry Primer 2 coats SuperPaint Interior Latex

Wood:

Self-prime use 2 coats of SuperPaint Interior Latex or 1 coat Premium Wall and Wood Primer 2 coats SuperPaint Interior Latex If the wood has bleeding (such as tannin or knot-holes), prime with Multi-Purpose Primer.

Other primers may be appropriate.

When repainting involves a drastic color change, a coat of primer will improve the hiding performance of the topcoat color.

10/2019 www.sherwin-williams.com continued on back

SuperPaint®

Interior Latex Flat

SURFACE PREPARATION

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Recognize that any surface preparation short of total removal of the old coating may compromise the service length of the system.

Caulking:

Gaps between walls, ceilings, crown moldings, and other interior trim can be filled with the appropriate caulk after priming the surface.

Drywall:

Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.

Masonry, Concrete, Cement, Block:

All new surfaces must be cured according to the supplier’s recommendations—usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer.

SURFACE PREPARATION

Mildew:

Prior to attempting to remove mildew, it is always recommended to test any cleaner on a small, inconspicuous area prior to use. Bleach and bleaching type cleaners may damage or discolor existing paint films. Bleach alternative cleaning solutions may be advised. Mildew may be removed before painting by washing with a solution of 1 part liquid bleach and 3 parts water. Apply the solution and scrub the mildewed area. Allow the solution to remain on the surface for 10 minutes. Rinse thoroughly with water and allow the surface to dry before painting. Wear protective eyewear, waterproof gloves, and protective clothing. Quickly wash off any of the mixture that comes in contact with your skin. Do not add detergents or ammonia to the bleach/water solution.

Plaster:

Must be cured, usually 30 days, and hard. If painting cannot wait, allow the surface to dry 7 days and prime with Loxon Concrete and Masonry Primer. Soft, porous, or powdery plaster should be treated with a solution of 1 pint household vinegar to 1 gallon of water.

Repeat until the surface is hard, rinse with water and allow to dry before painting.

Wood:

Sand any exposed wood to a fresh surface.

Patch all holes and imperfections with a wood filler or putty and sand smooth.

CAUTIONS

For interior use only.

Protect from freezing.

Non-photochemically reactive.

Before using, carefully read CAUTIONS on label CRYSTALLINE SILICA: Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Adequate ventilation required when sanding or abrading the dried film. If adequate ventilation cannot be provided wear an approved particulate respirator (NIOSH approved). Follow respirator manufacturer’s directions for respirator use. Avoid contact with eyes and skin.

Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Abrading or sanding of the dry film may release crystalline silica which has been shown to cause lung damage and cancer under long term exposure. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT

TAKE INTERNALLY. KEEP OUT OF THE REACH OF

CHILDREN.

HOTW 10/09/2019 A86W01151 09 33

FRC,SP

CLEANUP INFORMATION

Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with compliant cleanup solvent to prevent rusting of the equipment. Follow manufacturer’s safety recommendations when using solvents.

The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication.

Consult your Sherwin-Williams representative or visit www.paintdocs.com to obtain the most current version of the PDS and/or an SDS.

San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 04

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045

Agrológico y Veterinario de Dorado Fecha: 10/22/2021 Núm. Subasta: 21-1980

Copias Fecha Descripción

1 10/22/21 Submittal #009

(Roof Sealing)

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

hecto Stamp hecto Stamp

#009 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Roof Sealing

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

COMMERCIAL PRODUCT INFORMATION

COMMERCIAL PRODUCT DATA SHEET

Weight per roll

Roll Length

Roll Width

Thickness

Top Surfacing

Back Surfacing

Effective Coverage

Selvage Surfacing danosa danosa danosa danosa danosa danosa danosa danosa Lot. 29, Luchetti Industrial Complex, Bayamón, Puerto Rico 00961 • P O Box 13757 Santurce Station, San Juan, Puerto Rico 00908

Tel. (787) 785-4545 • Fax. (787) 787-3902 Website: www.danosapr.com ◘ ◘ ◘ ◘ email: sales@danosapr.com

DESCRIPTION

Esterdan RM-Plus is a SBS modified bitumen top membrane with a polyester mat reinforcement finished with ceramic granules on the top as a protection surface and burn-off film or silica sand on the other side.

PRODUCT USES

Esterdan RM-Plus is a top membrane that can be used in conjunction to Danosa Roofing Systems. The installation procedure is by means of a high heat propane torch, hot mop or cold adhesive according to specifications and roof requirements. It may be used in Built -up Roofing Systems and over most roof decks with positive drainage. Contact Danosa for specific approval on other product uses.

PACKAGING

The rolls are placed upright on the selvage edge on pallets.

The palletized material is protected by a polyethylene film and stretch wrapped at the base of the pallet.

Pallet: 40 in X 48 in wooden pallet Number Rolls Per Pallet: 24 Number Pallets Per Truckload: 20

STORAGE AND HANDLING

All Danosa roll roofing products should be stored on end on a clean flat surface. Care should be taken that rolls are not dropped on ends or edges and are not stored in a leaning position. Deformation resulting from these actions will make proper installation difficult. All roofing should be stored in a dry place, out of direct exposure to the elements.

ADVANTAGES

Esterdan RM-Plus has excellent puncture and tear resistance. The SBS modified bitumen membrane allows the product to easily accommodate due to the elongation and recovery properties. It is also easy to handle and quick installations can be obtained with excellent results.

PRODUCT APPROVALS

Esterdan RM-Plus meets the specification ASTM D-6164-98, Grade G, Type II, and complies with the requirements of CGSB- 37-GP-56M. Esterdan RM-Plus is approved by Factory Mutual Research Corporation and Underwriters Laboratories for use in Danosa Approved Systems. Danosa Roofing systems also have received approval of many regional and local authorities such as:

Please contact the Danosa Sales Office for specific information as required.

LEED INFORMATION

Post Consumer Recycled Content: ..........0% Post Industrial Recycled Content: ..........10% Manufacturing Location: ......................... Bayamón, PR Solar Reflectance Index: ........................100*

* - when coated with our Danosa White Roof Coating

Rev 1/2011

ESTERDAN RM-PLUS

8.0 m² (75 ft2)

Avg: 100 lbs.

8.0 meters (26.25 ft)

Avg: 1 meter (3.28 ft)

Avg: 5.0 mm (197 mils)

Polyester film

Ceramic Granule

Burn–off film or silica sand

FormatGreen TM shelgren Highlight Esterdan RM-Plus is a top membrane that can be used in shelgren Highlight conjunction to Danosa Roofng Systems.

PHYSICAL AND MECHANICAL PROPERTIES

Rev 1/2011

Thickness

Weight

Maximum Load @ 73˚ F

Tensile-Tear Strength

Maximum Load @ 0˚ F

Elongation @Maximum Load, 73˚F

Low Temperature Flexibility

Compound Stability

Dimensional Stability

Granule Embedment

ASTM D 5147

ASTM D 146

ASTM D 5147

ASTM D 5147

ASTM D 5147

ASTM D 5147

ASTM D 5147

ASTM D 5147

ASTM D 5147

ASTM D 5147

mils/mm lbs. per sq.ft.

lbf/in lbf/in lbf

˚F ˚C

˚F ˚C gr/sample

Property (as manufactured)

Test Method Units Values danosa danosa danosa danosa danosa danosa danosa danosa Lot. 29, Luchetti Industrial Complex, Bayamón, Puerto Rico 00961 • P O Box 13757 Santurce Station, San Juan, Puerto Rico 00908

Tel. (787) 785-4545 • Fax. (787) 787-3902 Website: www.danosapr.com ◘ ◘ ◘ ◘ email: sales@danosapr.com

197 / 5.0

-13 -25

ESTERDAN RM-PLUS

1.14

<0.4

1.5

FormatGreen TM shelgren

San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 05

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045

Agrológico y Veterinario de Dorado Fecha: 10/22/2021 Núm. Subasta: 21-1980

Copias Fecha Descripción

1 10/22/21 Submittal #010

(Surge Protective Devices)

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

hecto Stamp hecto Stamp

#010 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Surge Protective Devices

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 06

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045

Agrológico y Veterinario de Dorado Fecha: 10/22/2021 Núm. Subasta: 21-1980

Copias Fecha Descripción

1 10/22/21 Submittal #011

(Interior Lamps)

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

hecto Stamp hecto Stamp

#011 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Interior Lamps

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

CONTRACTOR SELECT / FLUORESCENT TROFFERS_LENSED

ORDERING INFORMATION

2GT Specifications

Length: 24 (60.1)

Width: 24 (60.1)

Depth: 3-1/8 (7.9)

GT Specifications

Length: 48 (121.9)

Width: 24 (60.1)

Depth: 3-1/8 (7.9)

All dimensions are inches (centimeters).

Contractor Select

Troffers

GT

2GT

FEATURES & SPECIFICATIONS

INTENDED USE — Low-profile static luminaire provides general illumination for recessed applications;

ideal for restricted plenum spaces. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

Attributes: Designed exclusively for use with T8 lamps, electronic ballasts and sockets.

CONSTRUCTION — Smooth hemmed sides and smooth, inward formed end flanges for safe handling.

Lighter weight fixture allows for safe, easy installation.

Standard steel door frame has superior structural integrity with premium extruded appearance and precision flush mitered corners. Steel door allows easy lens replacement without frame disassembly (for lenses up to .156" thick). Powder painted, steel latches provide easy, secure door closure.

Superior mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material 100% UV stabilized. No asbestos is used in this product.

Finish: Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance.

Painted parts finished with high-gloss, baked white enamel.

ELECTRICAL — Standard ballast is electronic, thermally protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA certified ballast, universal voltage and sound rated A.

Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures.

MVOLT ballasts are Full light output - reduced energy. Less than 10% THD. Multi-volt operation, 120-277V.

LISTINGS — Standard: UL.

WARRANTY — 2-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

NOTE: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

Catalog # of Ballast Pre- # of Lamp Lamp Pallet Number UPC Description Lamps Wattage Voltage Type Wired Ballasts Type Included Qty.

GT2 MV 745975081714 2x4 troffer 2 32 120-277 Electronic, instant start N 1 N/A N 28

GT2L MV 745977456510 2x4 troffer 2 32 120-277 Electronic, instant start N 1 3500K Y 28

GT2LW MV 745976576271 2x4 troffer 2 32 120-277 Electronic, instant start Y 1 3500K Y 28

GT3 2MV 745975083510 2x4 troffer 3 32 120-277 Electronic, instant start N 2 N/A N 28

GT3 MV 745975081721 2x4 troffer 3 32 120-277 Electronic, instant start N 1 N/A N 28

GT3L MV 745975081684 2x4 troffer 3 32 120-277 Electronic, instant start N 1 3500K Y 28

GT3L 2MV 745972879154 2x4 troffer 3 32 120-277 Electronic, instant start N 2 3500K Y 28

GT3L41 MV 745975083541 2x4 troffer 3 32 120-277 Electronic, instant start N 1 4100K Y 28

GT3LW MV 745975081882 2x4 troffer 3 32 120-277 Electronic, instant start Y 1 3500K Y 28

GT3L41W MV 745975799206 2x4 troffer 3 32 120-277 Electronic, instant start Y 1 4100K Y 28

GT4 2MV 745975081998 2x4 troffer 4 32 120-277 Electronic, instant start N 2 N/A N 28

GT4 MV 745975081776 2x4 troffer 4 32 120-277 Electronic, instant start N 1 N/A N 28

GT4L MV 745975081912 2x4 troffer 4 32 120-277 Electronic, instant start N 1 3500K Y 28

GT4L41 MV 745975083565 2x4 troffer 4 32 120-277 Electronic, instant start N 1 4100K Y 28

GT4L41W MV 745975083534 2x4 troffer 4 32 120-277 Electronic, instant start Y 1 4100K Y 28

GT4LW MV 745975081707 2x4 troffer 4 32 120-277 Electronic, instant start Y 1 3500K Y 28

GT2U MV 745975081967 2x2 troffer 2 32-U lamp 120-277 Electronic, instant start N 1 N/A N 56

GT2ULW MV 745976402662 2x2 troffer 2 32-U lamp 120-277 Electronic, instant start Y 1 3500K Y 56

(60.1)

3-1/8 (7.9)

Catalog Number

Notes

Type http://www.acuitybrandslighting.com/Library/LL/documents/specsheets/Acrylic-Compatibility.pdf SJU-Quote2

TROFFERS_LENSED

CONTRACTOR SELECT / FLUORESCENT: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com ©2009-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/03/15

MOUNTING DATA

Troffers

DIMENSIONS

PHOTOMETRICS

Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%.

Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request.

GT4 MV

Report LTL 7425 Lumens per lamp - 2850 – Lum. eff. - 78.6% S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30% 10% 0 94 94 94 91 91 91 87 87 87 1 86 82 79 84 81 78 77 75 73 2 79 73 68 77 71 67 68 64 61 3 72 64 58 70 63 57 61 56 52 4 66 57 51 65 56 50 54 49 45 5 61 51 45 60 51 44 49 43 39 6 57 47 40 55 46 39 44 39 34 7 53 42 36 51 42 35 40 35 31 8 49 39 32 48 38 32 37 31 27 9 46 35 29 45 35 29 34 29 25 10 43 33 27 42 32 27 32 26 22

Zonal Lumens Summary Zone Lumens %Lamp %Fixture 0-30 2718 23.8 30.3 0-40 4481 39.3 50.0 0-60 7553 66.3 84.2 0-90 8965 78.6 100.0 90-180 0 0 0 0-180 8965 78.6 100.0

GT3 MV

Report LTL 7421 Lumens per lamp - 2850 – Lum. eff. - 80.1% S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30% 10% 0 95 95 95 93 93 93 89 89 89 1 88 84 81 85 82 79 79 76 74 2 80 74 69 78 72 68 70 66 62 3 74 66 59 72 64 58 62 57 53 4 68 58 52 66 57 51 55 50 46 5 62 52 45 61 52 45 50 44 40 6 58 47 40 56 47 40 45 39 35 7 54 43 36 52 42 36 41 35 31 8 50 39 33 49 39 32 38 32 28 9 47 36 30 45 36 29 35 29 25 10 44 33 27 43 33 27 32 27 23

Zonal Lumens Summary Zone Lumens %Lamp %Fixture 0-30 2066 24.2 30.2 0-40 3412 39.9 49.8 0-60 5768 67.5 84.2 0-90 6851 80.1 100.0 90-180 0 0 0 0-180 6851 80.1 100.0

4-7/8 (12.4)

6-15/16 (17.8)

6-15/16 (17.8)

6-15/16 (17.8)

(60.9)

(60.9)

2-9/16 (6.5)

3-3/16 (8.1)

3-3/16 (8.1)

(60.9)

3-3/16 (8.1)

7-7/8 (20.0)

(60.9)

12-1/4 (31.1)

6-1/8 (15.5)

(60.9)

4-1/4 (10.8)

(60.9)

3-3/16 (8.1)

3-3/16 (8.1)

3-3/16 (8.1)

GT2U MV

Report LTL 7534 Lumens per lamp - 2600 – Lum. eff. - 72.9% S/MH (along) 1.2 (across) 1.4 Coefficient of Utilization Ceiling 80% 70% 50% Wall 70% 50% 30% 70% 50% 30% 50% 30% 10%

0 87 87 87 85 85 85 81 81 81 1 80 77 74 78 75 72 72 70 68 2 73 68 63 71 66 62 64 60 57 3 67 60 54 65 59 54 57 52 49 4 62 54 48 60 53 47 51 46 42 5 57 48 42 56 47 42 46 41 37 6 53 44 37 52 43 37 42 36 32 7 49 40 34 48 39 33 38 33 29 8 46 36 30 45 36 30 35 30 26 9 43 33 28 42 33 27 32 27 23 10 40 31 25 39 30 25 30 25 21 Zonal Lumens Summary Zone Lumens %Lamp %Fixture

0-30 1191 22.9 31.4 0-40 1950 37.5 51.4 0-60 3220 61.9 84.9 0-90 3793 72.9 100.0 90-180 0 0 0 0-180 3793 72.9 100.0

San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 15

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045 Agrológico y Veterinario de Dorado Fecha: 11/12/2021 Núm. Subasta: 21-1980

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

Copias Fecha Descripción

1 11/12/21 Submittal #012

(Exterior Lamps) hecto Stamp

#012 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Exterior Lamps

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

November 12, 2021

LEDVANCE® Floodlight 100W, 150W & 200W Outdoor luminaires | LED floodlight

Area of application

Car parks and underpasses Garages

Public areas

Building facades Construction areas

Product family datasheet

Luminaire efficacy: up to 100 lm/W

Luminous flux: up to 20000lm

Colour temperature: 4000K

Available with beam angle: 100°

Type of protection: IP65

Impact resistance: IK08

Black Aluminum housing, tempered glass cover, carbon steel bracket, aluminum heat sink

Ambient temperature in operation: -20…+50 °C

Lifetime (L70/B50): up to 50000h

Up to 5-years guarantee

Product features

Product benefits

Direct replacement up to 1500W halogen Floodlight luminaires Energy savings of up to 90% compared to halogen floodlight luminaires

Optimized weight and size due to compact design

Very homogenous light Available certificates: CE, CB, TUEV SUED

V1-2016 Page 1 of 2 © 2016, LEDVANCE GmbH. All rights reserved.

Technical data

Product family datasheet

Disclaimer

Product description GTIN (EAN) Nominal wattage

[W]

Nominal voltage

[V]

Power factor

[λ]

Luminous flux [lm]

Luminaire efficacy [lm/W]

Colour temperature

[K]

CRI

index [Ra]

Floodlight LED 100W/4000K Black IP65 4058075001138 100W 230V > 0.9 10000 100 4000K >80

FloodlightLED 150W/4000K Black IP65 4058075001176 150W 230V > 0.9 15000 100 4000K >80

FloodlightLED 200W/4000K Black IP65 4058075001190 200W 230V > 0.9 20000 100 4000K >80

Product description Beam angle

Rated life time L70 / B50

[h]

Type of protection IP rating

Protection class

Product size l x w or Ø

[mm]

Height h

[mm]

Body colour

Floodlight LED 100W/4000K Black IP65 100° 30000 65 II 237 x 247 82 black

FloodlightLED 150W/4000K Black IP65 100° 50000 65 II 269 x 298 128 black

FloodlightLED 200W/4000K Black IP65 100° 50000 65 II 328 x 362 125 black

Packaging information

Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.

V1-2016 Page 2 of 2 © 2016, LEDVANCE GmbH. All rights reserved.

Product description GTIN (EAN)

Dimensions

EAN10

l x w x h [mm]

Gross weight

EAN 10

[g]

Volume [dm³]

Packaging unit

[Pieces/unit]

Floodlight LED 100W/4000K Black IP65 4058075001138 335 x 295 x 162 4427 15.68 1

FloodlightLED 150W/4000K Black IP65 4058075001176 378 x 323 x 172 6029 21.00 1

FloodlightLED 200W/4000K Black IP65 4058075001190 455 x 390 x 167 6732 29.63 1

San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 17

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045 Agrológico y Veterinario de Dorado Fecha: 11/12/2021 Núm. Subasta: 21-1980

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

Copias Fecha Descripción

1 11/12/21 Submittal #014

(Transfer Switch) hecto Stamp

#014 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Transfer Switch

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

November 12, 2021

RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.comATS 800 1 of 6

ATS 800 AMPS

Technical Data Sheet

V.1.1

The image is referential

Automatic Transfer Switch 800 Amp.

Application Data

The Serie-800LD700B-3PH-GAL Series Automatic Transfer Switch (ATS) provides a range of equipment for residential purposes.

Using high quality components as Osemco Transfer Switches and RK Power controllers, the result is to give the people of Puerto Rico a professional solution to their energy needs in case of emergencies. The RK- Automatic Transfer Switch (ATS) have been designed to manage, with maximum efficiency, all low voltage electrical installations: from industrial plants, hospitals, traditional and renewable power generation installations to buildings, shopping centers, data centers and communication networks. Designed, manufactured and tested using the most reliable components in the transfer industry, to provide reliable power when you need it most. Its low cost of operation and maintenance are increased with the guarantee of 2 years in parts and services. The unit is supported by a service network trained to respond to the service needs of the equipment.

This makes it possible to have a professional post-sale that guarantees the investment made.

Features

- Ratings of 800A.

- 3 or 4 Poles.

- Available to 600 VAC, 60 Hertz

- Components designed under ISO9000 certification, complying with UL, and exported to U.S.A.

-The current breaking part is completely sealed in a mold structure to exclude the risk of electric shock by human body contact, or electric faults due to accumulated dusts or foreign matters on conducting parts during long-term use.

-Safe conducting performance is maintained by constant contact pressure for each phase.

Short-circuit overcurrent strength is high because it is protected by latch mechanism.

-This product has a one-phase structure insulated and separated by phase, so three or four phase conducting parts can be assembled conforming to the capacity and number of phases according to the user’s convenience.

-Semi-permanent lifetime is ensured by employing a unique structure arc chute, with short arc breaking time and low wear of contact. -The trip operation by breaking spring always realizes stable breaking characteristic, regardless of operating voltage.

RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.comATS 800 2 of 6 V.1.1

1. Metric dimensions (in) and weights (Kg) shown in parenthesis adjacent to English measurements in inches and pounds.

2. All dimensions and weights are approximate and subject to change without notice.

3. Special enclosures (NEMA 3R, 4, 12, etc.)

dimensions and layout may differ. Consult the factory for details.

4. Normal and emergency may be ordered inverted on any switch. The load may be inverted consult the manufacturer.

5. For certified drawings, contact the technical engineering department of RK -

POWER GENERATOR.

Dimensions and Weight

Scheme of operation ATS

ATS 800 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 3 of 6

Ampere Rating Poles

NEMA 1 Reference Reference Height

(A) Width

(B) Depth

(C) Figure Material

800A 3P 83 in 45 in 24 in A Galvanized

Transfer switches are installed in power distribution systems between power sources and electrical loads. Transfer switches safely switch loads between two isolated sources of power.

Automatic transfer switches provide the following essential functions without human intervention:

• Carry rated current continuously.

• Detect power failure on primary source.

• Start alternate power source.

• Transfer load.

• Sense restoration of power to primary power source.

• Re-transfer load to primary source.

http://www.rkpowergenerator.com/ Lenovo Sello

ATS 800 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 4 of 6 V.1.1

Internal Circuit

All contacts of switch shown in

CTTS

Operational Flow ChartOperating Circuit http://www.rkpowergenerator.com/

HAT 700B ATS Controller

ATS 800 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 5 of 6

Rated Current A 800

Rated Voltage V AC 600

Pole P 3-Abr

Throw T Double Throw

Connection Type Front N/A

Back Yes

Rated Short-Time Withstand Current (1sec)KA

Short-Circuit Making Capacity KA 22

Switching Capacity (Class) AC33B

Number of Operating Cycles

Without Current 10000A

With Current 5000A

Switching Frequency (Times/h) 60

Transfer Sequence A↔B,A↔Neutral(off)↔B

Operating Time

Power A

Making(ms) ≤100

Breaking (ms)

Power B

Making (ms) ≤30

Breaking (ms)

Operating Current

AC/DC 110V A 10A

Closing AC 220V A 5A

Trip AC/ DC110V A 4A

DC 220V A 2A

External Dimension and Weight

Front Type Dimension (mm)

H 298A 298A

W 400A 400A

D 143A 143A

Back Type Dimension (mm)

H 267 267

W 400 480

D 178 178

Front Type kg 20 24

Weight Back Type kg 19 23

HAT700 series ATS controller is intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for

ATS. The powerful Microprocessor contained within the unit allows for precision voltage (2-way-3-phase) measuring and make accurate judgment; in addition, the corresponding digital output port will active when there is over/under voltage, over/under frequency, loss of phase and other abnormal condition occurs.

Wiring Diagrams / Typical Applications

Specifications / Power Connections

ATS 600 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 6 of 6

Switch Size

Amps.

Normal, Emergency & Load

Terminals Cables per

Pole

Range of Wire

Sizes

800 4 4/0

NOTES:

Special terminal lugs and neutral bars are available at additional cost. Contact factory and advise cable sizes and number of conductors per pole.

Fully rated neutral provided on 2 phase, 3 wire system.

Special lug arrangements may require different enclosure dimensions. For certified drawings, contact factory.

Puerto Rican Owned

Puerto Rican Made

RK Power Generator CORP.

Quebrada Arenas Industrial Park San Juan, Puerto Rico 00926

Phone +1787-286-6454 info@rkpowergenerator.com

RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.comATS 1600 1 of 6

ATS 1600 AMPS

Technical Data Sheet

The image is referential

Automatic Transfer Switch 1600 Amp.

The Serie-1600LD700B-3PH-GAL Series Automatic Transfer Switch (ATS) provides a range of equipment for residential purposes.

Using high quality components as Osemco Transfer Switches and RK Power controllers, the result is to give the people of Puerto Rico a professional solution to their energy needs in case of emergencies. The RK- Automatic Transfer Switch (ATS) have been designed to manage, with maximum efficiency, all low voltage electrical installations: from industrial plants, hospitals, traditional and renewable power generation installations to buildings, shopping centers, data centers and communication networks. Designed, manufactured and tested using the most reliable components in the transfer industry, to provide reliable power when you need it most. Its low cost of operation and maintenance are increased with the guarantee of 2 years in parts and services. The unit is supported by a service network trained to respond to the service needs of the equipment.

This makes it possible to have a professional post-sale that guarantees the investment made.

Features

- Ratings of 1600A.

- 3 or 4 Poles.

- Available to 600 VAC, 60 Hertz

- Components designed under ISO9000 certification, complying with UL, and exported to U.S.A.

-The current breaking part is completely sealed in a mold structure to exclude the risk of electric shock by human body contact, or electric faults due to accumulated dusts or foreign matters on conducting parts during long-term use.

-Safe conducting performance is maintained by constant contact pressure for each phase.

Short-circuit overcurrent strength is high because it is protected by latch mechanism.

-This product has a one-phase structure insulated and separated by phase, so three or four phase conducting parts can be assembled conforming to the capacity and number of phases according to the user’s convenience.

-Semi-permanent lifetime is ensured by employing a unique structure arc chute, with short arc breaking time and low wear of contact. -The trip operation by breaking spring always realizes stable breaking characteristic, regardless of operating voltage.

RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.comATS 1600 2 of 6 V.1.1

1. Metric dimensions (in) and weights (Kg) shown in parenthesis adjacent to English measurements in inches and pounds.

2. All dimensions and weights are approximate and subject to change without notice.

3. Special enclosures (NEMA 3R, 4, 12, etc.)

dimensions and layout may differ. Consult the factory for details.

4. Normal and emergency may be ordered inverted on any switch. The load may be inverted consult the manufacturer.

5. For certified drawings, contact the technical engineering department of RK -

POWER GENERATOR.

Dimensions and Weight

Scheme of operation ATS

ATS 1600 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 3 of 6

Ampere Rating Poles

NEMA 1 Reference Reference Height

(A) Width

(B) Depth

(C) Figure Material

1600A 3P 83 in 45 in 24 in A Galvanized

Transfer switches are installed in power distribution systems between power sources and electrical loads. Transfer switches safely switch loads between two isolated sources of power.

Automatic transfer switches provide the following essential functions without human intervention:

• Carry rated current continuously.

• Detect power failure on primary source.

• Start alternate power source.

• Transfer load.

• Sense restoration of power to primary power source.

• Re-transfer load to primary source.

http://www.rkpowergenerator.com/ Lenovo Sello

ATS 1600 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 4 of 6 V.1.1

Internal Circuit

All contacts of switch shown in

CTTS

Operational Flow ChartOperating Circuit

HAT 700B ATS Controller

ATS 1600 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 5 of 6

Rated Current A 1600

Rated Voltage V AC 600

Pole P 3-4

Throw T Double Throw

Connection Type Front N/A

Back Yes

Rated Short-Time Withstand Current (1sec)KA

Short-Circuit Making Capacity KA 32

Switching Capacity (Class) AC33B

Number of Operating Cycles

Without Current 10000A

With Current 5000A

Switching Frequency (Times/h) 60

Transfer Sequence A↔B,A↔Neutral(off)↔B

Operating Time

Power A

Making(ms) ≤150

Breaking (ms)

Power B

Making (ms) ≤30

Breaking (ms)

Operating Current

AC/DC 110V A 8A

Closing AC 220V A 4A

Trip AC/ DC110V A 4A

DC 220V A 2A

External Dimension and Weight

Front Type Dimension (mm)

H 298A 298A

W 400A 480A

D 143A 143A

Back Type Dimension (mm)

H 267 267

W 400 480

D 178 178

Front Type kg 58 69

Weight Back Type kg 55 65

HAT700 series ATS controller is intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for

ATS. The powerful Microprocessor contained within the unit allows for precision voltage (2-way-3-phase) measuring and make accurate judgment; in addition, the corresponding digital output port will active when there is over/under voltage, over/under frequency, loss of phase and other abnormal condition occurs.

Wiring Diagrams / Typical Applications

Specifications / Power Connections

ATS 1600 RK Power Generator Corp. 787 286 6454 www.rkpowergenerator.com 6 of 6

Switch Size

Amps.

Normal, Emergency & Load

Terminals Cables per

Pole

Range of Wire

Sizes

1600 4 350MCM

NOTES:

Special terminal lugs and neutral bars are available at additional cost. Contact factory and advise cable sizes and number of conductors per pole.

Fully rated neutral provided on 2 phase, 3 wire system.

Special lug arrangements may require different enclosure dimensions. For certified drawings, contact factory.

Puerto Rican Owned

Puerto Rican Made

RK Power Generator CORP.

Quebrada Arenas Industrial Park San Juan, Puerto Rico 00926

Phone +1787-286-6454 info@rkpowergenerator.com hecto Stamp

#015 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Acoustical Ceiling Tiles

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

November 10, 2021

San Juan, PR 00917 T: 939-267-7869 | E: codomconstruction@gmail.com | E: prcodom@gmail.com

HOJA TRÁMITE: 27

Proyecto: Reparación de Daños Estructurales al Laboratorio Contrato: 2022-055045

Agrológico y Veterinario de Dorado Fecha: 12/30/2021 Núm. Subasta: 21-1980

Copias Fecha Descripción

1 12/30/21 Submittal #020

(Sellador de grietas)

Vía:

⬜ Entrega ⬜ Mensajero ⬜ E-mail ⬜ Correo ⬜ Fax ⬜ Otro

Tipo Documento:

⬜ Certificación de pago ⬜ Especificaciones ⬜ RFI ⬜ Orden de Cambio ⬜ Submittals ⬜ Dibujos ⬜ Archivos Digitales ⬜ Otro

Para:

⬜ Aprobación ⬜ Comentarios ⬜ Información ⬜ Según solicitado ⬜ Distribución ⬜ Estimado ⬜ Otro

Comentarios:

Sometido por: Héctor O. González - Representante Administrativo Contratista

Recibido por: Ing. Ricardo A. Lugo - Coordinador Proyecto (Dpt. Agricultura) Fecha:

hecto Stamp hecto Stamp

#020 Project Name:

Reparaciones de Daños Estructurales al Laboratorio Agrológico y Veterinario de Dorado

Contractor: Codom Construction, LLC.

☐ New

☐ Resubmittal

Sellador de grietas

(i) Contractor has complied with the requirements of Contract Documents in preparation, review, and submission of the designated submittal.

(ii) The Submittal is complete and in accordance with the Contract Documents and requirements of laws and regulations and governing agencies.

(iii) Dimensions have been confirmed and correlated at the job site; for quantities; for performance; for fabrication

December 30, 2021

PARÁMETROS VALORES

MÉTODOS DE

REFERENCIA

*Tiempo de secado tacto 30 min MT0157

*Tiempo de secado para repinte 2 h MT0034

Viscosidad a 25°C 100- 110 KU MT0002

Densidad a 25°C 1.145- 1.245 MT0001

Contenido de sólidos en peso 33+/- 2%

Contenido de sólidos en volumen 21+/- 2% MT0144

Rendimiento teórico 5.5 m²/l a un espesor seco de 1.5 mils -

Vida útil 24 meses -

Presentación Disponible en galón y caneca

Vida útil de almacenamiento Conservar la pintura en el envase cerrado, en un lugar seco y ventilado a una temperatura comprendida entre 5°C y 40°C

MT0045

Línea Arquitectónica

LOXON SELLADOR

SERIE ALS111

Descripción

El Loxon Sellador está recomendado para super�cies de calidad de albañilería, tanto en super�cies nuevas como previamente pintadas, siendo altamente resistente a la alcalinidad y a la e�orescencia. Rellena los poros de la super�cie e incrementa el rendimiento de los acabados y ayuda al recubrimiento por ser de color blanco.

Características

LOXON SELLADOR se caracteriza por ser:

- Resistente a la alcalinidad.

- Excelente adherencia.

- Excelente resistencia a la intemperie y humedad.

- Excelente propiedad de repintado.

Usos

Especialmente desarrollado para uso en:

-Ladrillo -Fibrocemento -Concreto

Encuentra una tienda cerca a ti en sherwin-williams.com.ec

*El tiempo de secado depende de la temperatura, humedad y espesor. (Especificar condiciones normales de 20°C y 60°C% HR)

Acabado VOC teórico (libre de agua y exentos)

Mate N/A

118 g/l ASTM D 3960

Línea Arquitectónica

LOXON SELLADOR

SERIE ALS111

Preparación de Superficies

• Eliminar mugre, polvo, grasa, pintura suelta u otras impurezas.

• La super�cie debe estar seca, limpia, y libre de alcalinidad.

• Sobre super�cies previamente pintadas remueva totalmente la pintura suelta y lije adecuadamente.

• Fisuras menores a 0,5mm se recomienda resanar aplicando masilla elastomérica. Fisuras de mayor dimensión deberán ser reparadas apropiadamente.

• Para bordes o cabezas de muro que estén expuestas al agua de lluvia se debe impermeabilizar con Impermeabilizante Elastomérico o pintura recomendada por SHERWIN- WILLIAMS ECUADOR para evitar que la residencia de agua en estas super�cies genere daños en las paredes como chorreaduras o migración de sales que deterioren el aspecto de la pintura.

• En super�cies nuevas se debe esperar por lo menos 30 días de secado antes de pintar la super�cie.

• Las super�cies brillantes deber ser lijadas para proporcionar adherencia a la nueva capa de pintura.

Precauciones

• No mezcle este producto con otros productos no recomendados.

• Mantenga el envase bien cerrado y almacénelo en un lugar fresco y seco.

• Evite el contacto con los ojos y piel. En caso de ocurrir lavar con abundante agua y consultar al médico. En caso de ingestión busque atención médica inmediata.

• Después de utilizar el producto, mantenga el sobrante en su propio envase bien cerrado y almacénelo en un lugar fresco.

• Manténgalo fuera del alcance de los niños.

Aplicación

Temperatura Ambiente: mínima: 10°C máxima: 43 °C

La temperatura de la super�cie deberá estar como mínimo 5 °C por encima de la temperatura de rocío.

Diluyente recomendado: Agua Proporción de dilución: Si se requiere, diluir 4:1 es decir cuatro partes de producto en una parte de agua.

Homogeneice el producto con una espátula.

Se puede aplicar con:

- Brocha.

- Rodillo.

- Airless

Limpieza de Equipos

La limpieza de los materiales empleados para la aplicación se lo puede hacer con agua.

Información y Asesoría

Dado que no tenemos control sobre las condiciones de aplicación o servicio de los productos, no aceptamos responsabilidad alguna por los resultados que pueden obtenerse en cada caso particular. En ningún caso el fabricante podrá ser responsabilizado por daños incidentales o consecuenciales, que puedan derivarse del uso inadecuado del producto.

Para otros usos, asesoría o información se recomienda consultar previamente con Servicio Técnico de SHERWIN-

WILLIAMS ECUADOR.

Esta información técnica reemplaza todas las publicaciones anteriores.

Encuentra una tienda cerca a ti en sherwin-williams.com.ec

S1 will remain relatively unchanged over a temperature range of -40° F to 180° F.

3/2018

LOXONTM S1 One Component Smooth Polyurethane Sealant

LIMITATIONS

Not recommended for:

a) Porous substrates subjected to continuous water immersion.

b) Joints contaminated with grease, wax, corrosion, bitumen or cement laitance.

c) Horizontal joints in floors or decks where abrasion or physical abuse is encountered.

d) Special architectural finishes without proper testing.

LOXONTM S1 sealant should be dry tooled. Tooling techniques using solvents or soapy solutions are not recommended.

All surfaces must be evaluated for adhesion prior to use.

Not designed as a glazing sealant in which the adhesive bond to glass is exposed to sunlight. The user or specifier should establish that any application in glazing will not expose the glass bond to appreciable amounts of ultraviolet radiation.

The surface of LOXONTM S1 sealant, when exposed to UV rays and sunlight, will yellow and not retain its gloss.

This may occur within a few weeks after exposure. The change of color is limited to the surface layer of the seal and should not compromise the sealing properties of the LOXONTM S1 if the dimensions of the joint are proper and the sealant is otherwise properly applied. In areas where color retention is critical, please refer to LOXONTM H1.

LOXONTM S1 will remain tacky for a few hours and attract dust and dirt from the jobsite which may affect the appearance of the sealant. Check tack-free time to prevent dirt pickup. Dampness and porous substrates with high moisture will trigger extensive curing of the sealant within a very short period of time. This may cause an excess of bubbling and foaming within the sealant and at the bottom of the bead.

During the cure time of LOXONTM S1, do not expose to curing silicone sealants, curing LOXONTM H1, alcohol based materials or solvents, acids, or solvent-based materials.

Until the sealant is fully cured, do not expose the sealant to any mechanical stress. Uncured sealant will not respond properly to cyclic expansion and contraction of the joint specified for the cured sealant only.

LOXONTM S1 must not be used to seal narrow joints, fillet joints, and face nail holes.

Smearing and feathering LOXONTM S1 over joints is not recommended.

Lower relative humidity and…