Attachment 4 Drawings_BSS Repaving.pdf
PDF 2 MB Posted
- Attached to
- GAOA Bell Smith Springs Repaving and Parking
- Solicitation number
- 12445526B0004
- Issued by
-
Department of Agriculture Forest Service
About this file
This document contains technical drawings and standard details for a federal construction project titled "BSS Repairing and Parking" under the U.S. Department of Agriculture Forest Service, Shawnee National Forest, dated 7/9/25 and originally designed by A. Henk.
The drawings specify construction standards and details for roadway and parking area repairs and improvements. Key elements include: culvert installation details showing cross-drain sections with minimum 4" select bedding and 12" IL CA-06 cover incidental to pay item 60230; culvert skew diagrams with 120-degree and 60-degree angles; pipe installation details for inlets and outlets; a proposed typical road cross-section with 0.02 ft./ft. slopes, 4-inch IL CA-10 crushed aggregate base incidental to pay item 40712C, and 40712C double-layer oil and chip surface; a typical chip seal section with HFE-150 seal coat emulsion, prime coat liquid asphalt, and specified chip materials incidental to pay item 40712C; concrete headwall details for circular and elliptical pipes with dimensional tables; silt fence details with filter fabric specifications; and parking area details for Bell Smith Springs and Hunting Branch areas showing 6" compacted IL CA6 base stone, Class 2 woven geotextile fabric, and 2.4% cross slopes. General notes specify contractor responsibility for quality control, traffic control compliance with MUTCD standards, installation of Type III barricades with road closed signs, off-site waste disposal at approved locations, and estimated roadway and parking dimensions referenced in a table. The drawings are marked "NO SCALE (8.5x11)" and include revision information and approval blocks.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Details and Drawings
A. Henk 7/9/25
S. Schlice S. Schlice S. Schlice C. Morris
| summary |
| Work for this project consists of, but is not limited to: mobilization, drainage excavation, brushing, clearing and grubbing, aggregate base and surface placement, roadway reconditioning, roadway excavation / new roadway construction, culvert removal ... |
| location |
| This project is located in the Shawnee National Forest on the Hidden Springs Ranger District. |
| USE OF PREMISES |
| General: Contractor shall have full use of Forest roads for construction operations, during construction period. Contractor's use of Forest roads is limited only by the Government's right to perform work or to retain other contractors on portions of ... |
| Contractor shall at all times conduct his operations to ensure the least inconvenience to the public and employees. Road closures will be permitted, when required, upon written approval of the Contracting Officer (CO). |
| Confine storage of materials to areas as approved by the CO. |
| Contractor shall provide adequate signing and barricades and take necessary safety measures to protect the public during all operations. Contractor shall minimize disturbance of all undisturbed areas. |
| Specifications Description |
| Preface |
| 101 - Terms¸ Format¸ and Definitions |
| 102 - Bid¸ Award¸ and Execution of Contract |
| 103 - Scope of Work |
| 104 - Control of Work |
| 106 - Acceptance of Work |
| 107 - Legal Relations and Responsibility to the Public |
| 108 - Prosecution and Progress |
| 109 - Measurement and Payment |
| 153 - Contractor Quality Control |
| 155 - Schedules for Construction Contracts |
| 156 - Public Traffic |
| 201 - Clearing and Grubbing |
| 203 – Removal of Structures and Obstructions |
| 204 - Excavation and Embankment |
| 301 - Untreated Aggregate Courses |
| 301.05 Compacting |
| 407 – Chip Seal |
| 407.01 Description |
| 407.07 Weather Limitations |
| 407.08 Production Start-Up Procedures |
| 407.09 Asphalt Application |
| 407.11 Placing and Finishing. Table 407-1 |
| 407.12 Double and Triple Course Chip Seal |
| 407.12 Double and Triple Course Chip Seal. Table 407-2 |
| 407.12 Double and Triple Course Chip Seal. Table 407-2a |
| 409 – Micro Surfacing |
| 411 – Asphalt Prime Coat |
| 602 - Culverts and Drains |
| 605 – Underdrains, Sheet Drains, and Pavement Edge Drains |
| 620 – Stone Masonry |
| 702 – Asphalt Material |
| 703 – Aggregate |
| 713 - Roadside Improvement Material |
| 713.04 Seed |
File details come from the government source that posted it. Updated .