Attachment 7_A0002 - LP2 Operations and Maintenance Electrical.pdf

This is a technical specification drawing for an electrical panel blank cover manufactured by Eaton Corporation for the Great Plains Dispatch facility. The document specifies a 2-inch blank cover panel with a Type 1 NEMA enclosure rated for 225 amperes at 208Y/120V, 3-phase, 4-wire service. The enclosure features a neutral rating of 225A and employs a Std. Boiled Aluminum construction with aluminum or copper cable connections rated at 10k A.I.C. fully rated capacity.

The panel contains 42 BAB1020-rated branch device positions arranged in a grid configuration, with one position designated as BAB3060H. The main lugs are rated for 225 amperes at the bottom cable entry point. Key specifications include mechanical terminals supporting 225A capacity, a flush-mounted EZ Trim door-in-door design with concealed hardware (EZT2042F), and box dimensions of 42" height by 20.625" width by 5.75" depth. The device utilizes a standard WEM2 keyed trim lock and includes a plastic, adhesive-backed nameplate with white lettering. The drawing was prepared by KCHERM on 12/21/11 and approved the same date, with revision level A and drawing number SDN0218722, identified as sheet 1 of 1 and page 93 of 98 in the source document set.