Attachment 4 Questions from Industry REV 1.pdf
PDF 97 KB Posted
- Attached to
- Upgrade HVAC for Bee Lab/Headhouse in Logan, UT
- Solicitation number
- 1232SA26Q0282
About this file
This is a Questions and Answers document for federal contract opportunity 1232SA26Q0282, issued as of April 23, 2026. The document addresses industry inquiries regarding an HVAC and building systems project.
The government clarified that small amounts of new ductwork are required on MH101 for CV-3, with additional ducting specified for FPB-1 and FPB-2, with references to updated drawings MD101 and MH101. The original roofing contractor is identified as Carlisle Syn Tec Roofing Systems, Carlisle, PA (800-233-0551), with warranty coverage from May 28, 2019 to May 27, 2039; contractors must coordinate with this vendor to maintain warranty standards when performing roof penetrations. The government confirmed that servicing existing HVAC equipment is outside the project scope, and no refrigerant gauges, air compressor, or new unfired pressure vessels are required. For materials, flue piping for boilers must be AL29-4C with PVC intakes; the existing expansion tank is to be reused with no new tank required. The project requires installation of an air dirt separator (per Spirotherm specifications) with no additional air separation tank needed. These clarifications address discrepancies between specification call-outs and final drawings, ensuring contractors understand exact material requirements and existing equipment to remain in place.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions from Industry 1232SA26Q0282 As of 23 April 2026
1. Multiple call-outs mention ducting, (acoustic flex, acoustic insulated duct, acoustic sealed registers, etc.) however, the final drawings omit any mention or schedule for it. I suspect the drawings we received are incomplete. Please clarify.
Govt Response: There is a small amount of new ductwork on MH101 for CV-3. There will also be a small amount of ducting for FPB-1 and FPB-2. See update MD101 and MH101.
2. How are we to stay within the roof warranty standards? Should we bring the original roofer to flash in our penetrations? And who is the original roofer?
Govt Response: Carlisle Syn Tec Roofing Systems, Carlisle, PA 800-233-0551 Warranty period May 28, 2019 to May 27, 2039
3. Should the existing and remaining hvac equipment be thoroughly inspected and serviced during this work period?
Govt Response: No, servicing existing equipment is not part of this scope of work.
4. Are the refrigerant pressure and temperature gauges to be permanently installed? Or should they remain on site for maintenance staff to utilize?
Govt Response: No refrigerant pressure or temperature gauges are called for on the project.
5. Will you provide more information about the requirements for the air compressor unit to be provided and/or installed?
Govt Response: No air compressor is called for in the drawings.
6. Provide an unfired pressure vessel. Is this applicable within this building plan?
Govt Response: There is no new unfired pressure vessels called for in this job. There is an existing expansion tank that is to be reused.
7. What Material is to be used on the flue piping for the boilers, it is specified that it is to be stainless steel, and specified to use SCH 40 PVC, Please clarify.
Govt Response: Flues are to be AL29-4C, and intakes are to be PVC.
8. Provide hot water expansion tank, the plans also state that the hot water expansion tank is to remain, Please clarify
Govt Response: There is no requirement for a new expansion tank. The expansion tank is existing to remain.
9. Provide a steel air separation tank. Is this overlapping the air dirt separator speced from spirotherm?
Please clarify.
Govt Response: Please provide an air dirt separator. No other air separation tank is required.
File details come from the government source that posted it. Updated .