Attachment 13_WD OR20240001.pdf
PDF 94 KB Posted
- Attached to
- LeGrande Water Development Federal contract opportunity
- Solicitation number
- 12048924R0011
- Issued by
- Department of Agriculture Forest Service
About this file
This document is a Davis-Bacon wage determination for construction projects in Oregon. It lists the prevailing wage rates and fringe benefits for various construction job classifications, including bricklayers, carpenters, electricians, cement masons, laborers, and truck drivers. The wage determination is effective for 2024 and supersedes the previous 2023 determination. It includes zone pay differentials based on the distance from specific cities. The document also outlines the process for appealing the wage determination.
The related federal contract opportunity is for the LaGrande Livestock Water Development Project, which involves the construction or reconstruction of 25 water developments. The project is set to begin in 2024 and be completed by November 1, 2025. The contractor will be responsible for supplying all equipment, transportation, personnel, tools, and supervision to construct the water developments and associated exclosure fencing, using materials provided at the LaGrande Ranger District.
View the file
Other files for this federal contract opportunity
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
"General Decision Number: OR20240001 02/23/2024
Superseded General Decision Number: OR20230001
State: Oregon
Construction Type: Highway
Counties: Oregon Statewide.
HIGHWAY CONSTRUCTION PROJECTS
Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658. Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).
|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $17.20 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2024. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $12.90 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2024. |
The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.
Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.
Modification Number Publication Date 0 01/05/2024 1 01/12/2024 2 02/02/2024 3 02/23/2024
BROR0001-006 06/01/2020
BAKER, BENTON (NORTH), CLACKAMAS, CLATSOP, COLUMBIA, GILLIAM, HARNEY, HOOD RIVER, LINCOLN (NORTH), LINN (NORTH), MALHEUR (NORTH), MARION, MORROW, MULTNOMAH, POLK, SHERMAN, TILLAMOOK, UMATILLA, UNION, WALLOWA, WASCO (NORTH), WASHINGTON AND YAMHILL
COUNTIES
Rates Fringes
BRICKLAYER.......................$ 41.20 22.39
BROR0001-007 06/01/2020
BENTON (SOUTH), CROOK, DESCHUTES, GRANT, JACKSON, JEFFERSON, KLAMATH, LAKE, LANE, LINCOLN (SOUTH), LINN (SOUTH), MALHEUR (SOUTH), WASCO (SOUTH) AND WHEELER COUNTIES
Rates Fringes
BRICKLAYER.......................$ 41.20 22.39
CARP9001-001 06/01/2022
ZONE 1:
Rates Fringes
Carpenters:
CARPENTERS..................$ 42.31 19.21
DIVER STANDBY...............$ 58.32 19.21
DIVERS TENDERS..............$ 51.32 19.21
DIVERS......................$ 95.32 19.21
MANIFOLD AND/OR
DECOMPRESSION CHAMBER
OPERATORS...................$ 51.32 19.21
MILLWRIGHTS.................$ 43.26 19.21
PILEDRIVERS.................$ 45.74 19.21
DEPTH PAY:
50 to 100 feet $2.00 per foot over 50 feet 101 to 150 feet 3.00 per foot over 50 feet 151 to 200 feet 4.00 per foot over 50 feet over 220 feet 5.00 per foot over 50 feet
Zone Differential (Add to Zone 1 rates):
Zone 2 - $1.25 Zone 3 - 1.70 Zone 4 - 2.00 Zone 5 - 3.00 Zone 6 - 5.00 Zone 7 - 10.00
ZONE 1 - All jobs or projects located within 30 miles of the respective City Hall
ZONE 2 - More than 30 miles and less than 40 miles from the respective City Hall
ZONE 3 - More than 40 miles and less than 50 miles from the respective City Hall
ZONE 4 - More than 50 miles and less than 60 miles from the respective City Hall
ZONE 5 - More than 60 miles and less than 70 miles from the respective City Hall
ZONE 6 - More than 70 miles from the respective City Hall.
ZONE 7 - More than 100 miles from the respective City Hall.
BASEPOINTS CITIES FOR CARPENTERS (EXCLUDING MILLWRIGHTS, PILEDRIVERS AND DIVERS)
ALBANY ASTORIA BAKER
BEND BROOKINGS BURNS
COOS BAY CORVALLIS EUGENE
GOLDENDALE GRANTS PASS HERMISTON
HOOD RIVER KLAMATH FALLS LAGRANDE
LAKEVIEW LONGVIEW MADRAS
MEDFORD McMINNVILLE NEWPORT
OREGON CITY ONTARIO PENDLETON
PORTLAND PORT ORFORD REEDSPORT
ROSEBURG SALEM ST. HELENS
THE DALLES TILLAMOOK VANCOUVER
BASEPOINTS FOR MILLWRIGHTS
EUGENE NORTH BEND LONGVIEW
PORTLAND MEDFORD THE DALLES
VANCOUVER
BASEPOINTS FOR PILEDRIVERS AND DIVERS
ASTORIA BEND COOS BAY
EUGENE KLAMATH FALLS LONGVIEW
MEDFORD NEWPORT PORTLAND
ROSEBURG SALEM THE DALLES
* ELEC0048-006 01/01/2024
CLACKAMAS, CLATSOP, COLUMBIA, HOOD RIVER, MULTNOMAH, TILLAMOOK, WASCO, WASHINGTON, SHERMAN AND YAMHILL (NORTH) COUNTIES
Rates Fringes
CABLE SPLICER....................$ 66.55 29.34
ELECTRICIAN......................$ 60.50 28.64
HOURLY ZONE PAY:
Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:
Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria
Zone Pay:
Zone 1: 31-50 miles $1.50/hour Zone 2: 51-70 miles $3.50/hour Zone 3: 71-90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour
*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.
ELEC0112-001 06/01/2021
BAKER, GILLIAM, GRANT, MORROW, UMATILLA, UNION, WALLOWA, AND WHEELER COUNTIES
Rates Fringes
CABLE SPLICER....................$ 52.50 23.01
ELECTRICIAN......................$ 50.00 22.93
ELEC0280-003 01/01/2024
BENTON, CROOK, DESCHUTES, JEFFERSON, LANE (EAST OF A LINE RUNNING NORTH AND SOUTH FROM THE NORTHEAST CORNER OF COOS COUNTY TO THE SOUTHEAST CORNER OF LINCOLN COUNTY), LINN, MARION, POLK AND YAMHILL (SOUTHERN HALF) COUNTIES
Rates Fringes
CABLE SPLICER....................$ 60.80 22.24
ELECTRICIAN......................$ 55.27 22.24
ELEC0291-006 06/01/2023
MALHEUR COUNTY
Rates Fringes
CABLE SPLICER....................$ 41.69 6%+14.80
ELECTRICIAN......................$ 37.90 6%+14.80
* ELEC0659-004 01/01/2023
DOUGLAS (EAST OF A LINE RUNNING NORTH AND SOUTH FROM THE NE CORNER OF COOS COUNTY TO
THE SE CORNER OF LINCOLN COUNTY), HARNEY, JACKSON, JOSEPHINE, KLAMATH AND LAKE
COUNTIES
Rates Fringes
CABLE SPLICER....................$ 64.58 1.5%+22.34
ELECTRICIAN......................$ 43.97 19.26
ZONE PAY: BASE POINTS ARE FROM THE DOWNTOWN POST OFFICE IN GRANTS PASS, KLAMATH
FALLS, ROSEBURG AND MEDFORD.
ZONE 1: 0-20 MILES $0.00 PER HOUR
ZONE 2: > 20-30 MILES $1.50 PER HOUR
ZONE 3: >30-40 MILES $3.30 PER HOUR
ZONE 4: >40-50 MILES $5.00 PER HOUR
ZONE 5: >50-60 MILES $6.80 PER HOUR
ZONE 6: >60 MILES $9.50 PER HOUR
*THESE ARE NOT MILES DRIVEN. zONES ARE BASED ON DELORNE
STREET ATLAS USA 5.0.
* ELEC0932-004 01/01/2024
COOS, CURRY, LINCOLN, DOUGLAS AND LANE COUNTIES (AREA LYING WEST OF A LINE NORTH AND
SOUTH FROM THE N.E. CORNER OF COOS COUNTY TO THE S.E. CORNER OF LINCOLN COUNTY)
Rates Fringes
ELECTRICIAN......................$ 50.03 24.00
ENGI0701-005 01/01/2024
ZONE 1:
POWER EQUIPMENT OPERATORS (See Footnote C)
Rates Fringes
POWER EQUIPMENT OPERATOR
GROUP 1.....................$ 56.66 16.90
GROUP 1A....................$ 58.82 16.90
GROUP 1B....................$ 60.98 16.90
GROUP 2.....................$ 54.75 16.90
GROUP 3.....................$ 53.60 16.90
GROUP 4.....................$ 50.27 16.90
GROUP 5.....................$ 49.03 16.90
GROUP 6.....................$ 45.81 16.90
Zone Differential (add to Zone 1 rates):
Zone 2 - $3.00 Zone 3 - $6.00
For the following metropolitan counties: MULTNOMAH; CLACKAMAS; MARION; WASHINGTON;
YAMHILL; AND COLUMBIA; CLARK; AND COWLITZ COUNTY, WASHINGTON WITH MODIFICATIONS AS
INDICATED:
All jobs or projects located in Multnomah, Clackamas and Marion Counties, West of the western boundary of Mt. Hood National Forest and West of Mile Post 30 on Interstate 84 and West of Mile Post 30 on State Highway 26 and West of Mile Post 30 on Highway 22 and all jobs or projects located in Yamhill County, Washington County and Columbia County and all jobs or projects located in Clark & Cowlitz County, Washington except that portion of Cowlitz County in the Mt. St. Helens ""Blast Zone"" shall receive Zone I pay for all classifications.
All jobs or projects located in the area outside the identified boundary above, but less than 50 miles from the Portland City Hall shall receive Zone II pay for all classifications.
All jobs or projects located more than 50 miles from the Portland City Hall, but outside the identified border above, shall receive Zone III pay for all classifications.
For the following cities: ALBANY; BEND; COOS BAY; EUGENE; GRANTS PASS; KLAMATH FALLS;
MEDFORD; ROSEBURG
All jobs or projects located within 30 miles of the respective city hall of the above mentioned cities shall receive Zone I pay for all classifications.
All jobs or projects located more than 30 miles and less than 50 miles from the respective city hall of the above mentioned cities shall receive Zone II pay for all classifications.
All jobs or projects located more than 50 miles from the respective city hall of the above mentioned cities shall receive Zone III pay for all classifications.
POWER EQUIPMENT OPERATORS CLASSIFICATIONS
Group 1 Concrete Batch Plan and or Wet mix three (3) units or more Crane, Floating one hundred and fifty (150) ton but less than two hundred and fifty (250) ton.
Crane, two hundred (200) ton through two hundred ninety-nine
(299) ton with two-hundred-foot (200?) boom or less (including jib, inserts and/or attachments) Crane, ninety (90) ton through one hundred ninety-nine (199) ton with over two hundred (200?) boom Including jib, inserts and/or attachments) Crane, Tower Crane with one hundred seventy-five-foot (175?)
tower or less and with less than two-hundred-foot (200?) jib Crane, Whirley ninety (90) ton and over Helicopter when used in erecting work Tunnel Boring Machine Tunnel, Micro Boring Tunnel Machine
Group 1A Crane, floating two hundred fifty (250) ton and over Crane, two hundred (200) ton through two hundred ninety-nine
(299) ton, with over two-hundred-foot (200?) boom (including jib, inserts and/or attachments) Crane, three hundred (300) ton through three hundred ninety-nine (399) ton Crane, Tower Crane with over one hundred seventy-five-foot (175?) tower or over two hundred foot (200?) jib Crane, tower Crane on rail system or 2nd tower or more in work radius
Group 1B Crane, three hundred (300) ton through three hundred ninety-nine (399) ton, with over two hundred- foot (200?)
boom (including jib, inserts and/or attachments) Floating crane, three hundred fifty (350) ton and over Crane, four hundred (400) ton and over
Group 2 Asphalt Plant (any type) Asphalt Roto-Mill, pavement profiler eight foot (8?) lateral cut and over Auto Grader or ?Trimmer?
Blade, Robotic Bulldozer, Robotic Equipment (any type) Bulldozer, over one hundred twenty thousand (120,000) lbs.
and above
Canal Trimmer Concrete Batch Plant and/or Wet Mix one (1) and two (2) drum Concrete Canal Liner Operator Concrete Diamond Head Profiler Concrete, Automatic Slip Form Paver Crane, Boom Truck fifty (50) ton and with over one hundred fifty-foot (150?) boom and over Crane, Floating (derrick barge) thirty (30) ton but less than one hundred fifty (150) ton Crane, Cableway twenty-five (25) ton and over Crane, Floating Clamshell three (3) cu. Yds. And over Crane, ninety (90) ton through one hundred ninety-nine (199) ton up to and including two hundred- foot (200?) boom (including jib inserts and/or attachments) Crane, fifty (50) ton through eighty-nine (89) ton with over one hundred fifty-foot (150?) boom (including jib inserts and/or attachments) Crane, Whirley under ninety (90) ton Crusher Plant Drone Excavator over one hundred thirty thousand (130,000) lbs.
Heavy Equipment Robotics Operator or Mechanic Loader one hundred twenty thousand (120,000) lbs. and above Master environmental Maintenance Mechanic Remote Controlled Earth Moving Equipment Shovel, Dragline, Clamshell, five (5) cu. Yds. And over Underwater Equipment remote or otherwise, when used in construction work Wheel Excavator any size
Group 3 Bulldozer, over seventy thousand (70,000) lbs. up to and including one hundred twenty thousand (120,000) lbs.
Crane, Boom Truck fifty (50) ton and over with less than one hundred fifty-foot (150?) boom Crane, fifty (50) ton through eighty-nine (89) ton with one hundred fifty-foot (150?) boom or less (including jib inserts and/or attachments) Crane, Shovel, Dragline or Clamshell three (3) cu. yds. but less than five (5) cu. Yds.
Excavator over eighty-five thousand (85,000) lbs. through one hundred thirty thousand (130,000) lbs.
Loader sixty thousand (60,000) lbs. and less than one hundred twenty thousand (120,000) lbs.
Group 4 Asphalt, Screed Asphalt Paver Asphalt Roto-Mill, pavement profiler, under eight foot (8?)
lateral cut
Asphalt, Recycle Machine Asphalt, Material Transfer Vehicle Operator Back Filling Machine Backhoe, Robotic, track and wheel type up to and including twenty thousand (20,000) lbs. with any attachments Blade (any type) Boatman, Licensed Boring Machine Bulldozer over twenty thousand (20,000) lbs. and more than one hundred (100) horse up to seventy thousand (70,000) lbs.
Cable-Plow (any type) Cableway up to twenty-five (25) ton Cat Drill (John Henry) Challenger Chippers Combination Heavy Duty Mechanic-Welder, when required to do both Compactor, multi-engine Compactor, Robotic Compactor with blade self-propelled Concrete, Breaker Concrete, Grout Plant Concrete, Mixer Mobile Concrete, Paving Road Mixer Concrete, Reinforced Tank Banding Machine Crane, Boom Truck twenty (20) ton and under fifty (50) ton Crane, Bridge Locomotive, Gantry and Overhead Crane, Carry Deck, Spider Crane, and similar types Crane, Chicago Boom and similar types Crane, Derrick Operator, under one hundred (100) ton Crane, Floating Clamshell, Dragline, etc. under three (3) cu.
yds. Or less than thirty (30) ton Crane, under fifty (50) ton Crane, Quick Tower under one-hundred-foot (100?) in height and less than one hundred fifty foot (150?) jib (on rail included) Diesel-Electric Engineer (Plant or Floating) Directional Drill over twenty thousand (20,000) lbs. pullback Drill Cat Operator Drill Doctor and/or Bit Grinder Drill, Oscillator Driller, Percussion, Diamond, Core, Cable, Rotary and similar type Excavator Operator over twenty thousand (20,000) lbs. through eighty-five thousand (85,000) lbs.
Generator Operator Grade Setter/layout from plans Grade-all
Guardrail Machines, i.e., punch, auger, etc.
Hammer Operator (Piledriver) Hoist, stiff leg, guy derrick or similar type, fifty (50) ton and over Hoist, two (2) drums or more Hydro Axe (loader mounted or similar type) Jack Operator, Elevating Barges, Barge Operator, self-unloading Loader Operator, front end and overhead, twenty-five thousand (25,000) lbs. and less than sixty thousand (60,000) lbs.
Log Skidders Mechanic, Heavy Duty Piledriver Operator (not crane type) Pipe, Bending, Cleaning, Doping and Wrapping Machines Rail, Ballast Tamper Multi-Purpose Rubber-tired Dozers and Pushers Scraper, all types Side-Boom Skip Loader, Drag Box Stump Grinder (loader mounted or similar type) Surface Heater and Planer Tractor, rubber-tired, over fifty (50) HP Flywheel Trenching Machine three-foot (3?) depth and deeper (Assistant to the Operator required) Truck, Crane Oiler-Driver 250 tons and over Tub Grinder (used for wood debris) Tunnel Boring Machine Mechanic ? hyperbaric pay: additional ten dollars ($10.00) per hour, incudes prep and decompress Tunnel, Mucking Machine Tunnel, Segment Plant Tunnel, Separation Plant Tunnel, Shaef Loader Tunnel, Shield Operator Ultra-High-Pressure Water Jet Cutting Tool System Operator Vacuum Blasting Machine Operator Water pulls, Water Wagons Welder; Heavy Duty
Group 5 Asphalt, Extrusion Machine Asphalt, Roller (any asphalt mix) Asphalt, Roto-Mill pavement profiler ground man Bulldozer, twenty thousand (20,000) lbs. or less, or one hundred (100) horse or less Cement Pump Chip Spreading Machine Churn Drill and Earth Boring Machine Compactor, self-propelled without blade Compressor, (any power) one thousand two hundred fifty (1,250) cu. ft. and over, total capacity
Concrete, Batch Plant Quality control Concrete, Combination Mixer and compressor operator, gunite work Concrete, Curb Machine, Mechanical Berm, Curb and/or Curb and Gutter Concrete, Finishing Machine Concrete, Grouting Machine Concrete, Internal Full Slab Vibrator Operator Concrete, Joint Machine Concrete, Mixer single drum, any capacity Concrete, Paving Machine eight foot (8?) or less (Assistance to the Operator required) Concrete, Placing Boom Concrete, Planer Concrete, Pump Concrete, Pump Truck Concrete, Pumpcrete Operator (any type) Concrete, Slip Form Pumps, power driven hydraulic lifting device for concrete forms Concrete, Spreader Concrete, Tele belt Concrete, Treated Base Roller Operator, Oiling Conveyored Material Hauler Crane, Boom Truck under twenty (20) tons Crane, Boom Type lifting device, five (5) ton capacity or less Drill, Directional type less than twenty thousand (20,000) lbs. pullback Drill, Mud Mixer Elevating Grader Operator, Tractor towed requiring Operator or Grader Elevating Loader Operator (any type) Elevator to move personnel or materials Forklift, over ten (10) ton or Robotic Helicopter Hoist Hoist Operator, single drum Hydraulic Backhoe track type up to and including twenty thousand (20,000) lbs.
Hydraulic Backhoe wheel type (any make) Laser Screed Lime Spreader, construction job site Loaders, rubber-tired type, less than twenty-five thousand (25,000) lbs.
Pavement Grinder and/or Grooving Machine (riding type) Pipe, cast in place Pipe Laying Machine Pulva-Mixer or similar types Pump Operator, more than five (5) pumps (any size) Rail, Ballast Compactor, Regulator, or Tamper machines Rail, Car Mover Rail, Clip Applicator Rail, High Rail Self Loader Truck Rail, Locomotive, forty (40) ton and over
Rail, Lo-Railer Rail, Shuttle Car Operator Rail, Speedswing Rail, Track Liner Service Oiler (Greaser) Sweeper Self-Propelled, Construction Job Site Tractor, Rubber-Tired, fifty (50) HP flywheel and under Trenching Machine Operator, maximum digging capacity three-foot (3?) depth Truck, All Terrain or Track type Truck, Barrel type Truck, Crane Oiler-Driver 100-249 tons Truck, Heavy Haul, specialized transporter, hydraulic, electric, or similar Truck, Off Road Trucks, Articulated and Non-articulated Trucks over forty (40) ton Truck, Vacuum Truck, Water Tunnel, Locomotive, Dinkey Tunnel, Power Jumbo setting slip forms, etc.
Group 6 Air Filtration Equipment Asphalt, Pugmill (any type) Asphalt, Raker Asphalt, Truck Mounted Asphalt Spreader, with Screed Assistant to the Operator Auger Oiler Bell Man (any type of communication) Boatman Bobcat, skid steed (less than one (1) yard) Broom, self-propelled, construction job site Compressor Operator (any power) under 1,250 cu. ft. total capacity Concrete Curing Machine (riding type) Concrete Saw Conveyor Operator or Assistant Crane, Tugger Crusher Feederman Crusher Oiler Deckhand Drill Assistant Drill, Directional Locator Forklift Grade Checker Guardrail Punch Oiler Heavy Duty Repairman Assistant Helicopter Radioman (ground) Hydraulic Pipe Press Hydrographic Seeder Machine, straw, pulp or seed Hydrostatic Pump Operator
Material Handler Mixer Box (CTB, dry batch, etc.)
Oiler Parts Man (Tool Room) Plant Oiler Pump (any power) Rail, Brakeman, Switchman, Motorman Rail, Tamping Machine, mechanical, self-propelled Rigger Roller grading (not asphalt) Truck, Crane Oiler-Driver under 100 tons Truck, Off-Road Trucks, Articulated and Non-Articulated Trucks forty (40) ton and under Truck, over highway, examples: material and equipment Welder’s Assistant Welding Machine Wire Mat or Brooming Machine
IRON0029-004 07/03/2023
Rates Fringes
IRONWORKER.......................$ 43.27 33.07
LABO0737-001 06/01/2023
Rates Fringes
Mason Tender/Hod Carrier Tenders to Bricklayers, Tile Setters, Marble Setters and Terrazzo Workers, Topping for Cement Finishers and Mortar Mixers...............$ 41.29 16.80
LABO0737-008 06/01/2023
ZONE 1:
LABORERS (SEE FOOTNOTE C)
Rates Fringes
Laborers:
GROUP 1.....................$ 36.11 16.80
GROUP 2.....................$ 37.41 16.80
GROUP 3.....................$ 31.39 16.80
Zone Differential (Add to Zone 1 rates):
Zone 2 - $0.85 Zone 3 - 2.00 Zone 4 - 3.00 Zone 5 - 5.00
ZONE 1 - All jobs or projects located within 30 miles of the respective City Hall
ZONE 2 - More than 30 miles and less than 40 miles from the respective City Hall
ZONE 3 - More than 40 miles and less than 50 miles from the respective City Hall
ZONE 4 - More than 50 miles and less than 80 miles from the respective City Hall
ZONE 5 - More than 80 miles from the respective City Hall.
BASEPOINTS:
ALBANY ASTORIA BAKER CITY
BEND BURNS COOS BAY
EUGENE GRANTS PASS HERMISTON
KLAMATH FALLS MEDFORD PENDLETON
PORTLAND ROSEBURG SALEM
THE DALLES
LABORER CLASSIFICATIONS
GROUP 1: Applicator (including Pot Tender for same) applying protective material by hand or nozzle on utility lines or storage tanks on project, Asphalt Plant; Asphalt Spreader; Batch Weighman; Broomers; Brush Burners and Cutters; Choker Setter; Choker Splicer; Clary Power Spreader; Clean-up Laborer; Clean up Nozzleman (concrete, rock, etc); Concrete Laborer; Crusher Feeder; Curing, Concrete; Demolition, wrecking, and moving; Dopping and Wrapping Pipe; Dumpman (for Grading Crew); Erosion Control Specialist; Fine Graders; Fence Builders; Form Strippers; Guard Rail, Median Rail, Barriers, Reference Post, Guide Post, Right of Way Marker; Remote Control (Dry Pack Machine, Jackhammer, Chipping Guns, Compaction, Paving Breakers, Hand Held Concrete Saw, Demo Saw, Core Drill); Precast Concrete Setter; Pressure Washer; Railroad Track Laborer; Ribbon Setter; Rip Rap Map; Sand Blasting (Wet); Scaffold Tender; Self Propelled Concrete Buggy; Sewer Laborer; Sign Erector; Signalman; Scissor and Manlift; Skipman; Slopers; Sprayman; Stake Chaser; Stake Setter; Tamper; Timber Faller and Bucker; Tool Operators (Hand Held, Walk Behind)
GROUP 2: Asbestos Removal; Asphalt Rakers, Bit Grinder, Concrete Core Drill, Concrete Pump Nozzleman, Concrete Saw Operator (Walk Behind, Walk Saw, Rail Mounted, Wire); Drill Operator; Grade Checker; Gunite Nozzleman; Hazardous Waste Laborer; High Scalers; Laser Bean (Pipe Laying); Loop Installation; Manhole Builder; Mold Remediation Laborer; Nippers and Timberman; Pipelayer; Powderman; Power Saw Operators (Bucking and Falling); Pumpcrete Nozzleman; Sand Blasting (Dry); Sewer Timberman;
Tugger Operator; Vibrators; Water Blaster
GROUP 3: Final Clean-up (detailed clean-up, limited to cleaning up floors, ceilings, walls, windows-prior to acceptance by the owner); Fire Watch; Landscaper; Traffic Flagger
FOOTNOTE C:
HANDLING OF HAZARDOUS WAST MATERIALS - Personnel in all craft classifications subject to working inside a federally designated Hazardous Waste perimeter shall be eligible for compensation in accordance with the following group schedule relative to the level of Hazardous Waste as outline in the specific Hazardous Waste Project Site Safety Plan:
H-1 Base Wage Rate when on a hazardous waste site when not outfitted with protective clothing.
H-2 Class ""C"" Suit - Basic hourly wage rate plus $1.00 per hour, fringes plus $0.15.
H-3 Class ""B"" Suit - Basic hourly wage rate plus $1.50 per hour, fringes plus $0.15.
H-4 Class ""A"" Suit -Basic hourly wage rate plus $2.00 per hour, fringes plus $0.15.
PAIN0010-005 07/01/2022
Rates Fringes
PAINTER
HIGHWAY & PARKING LOT
STRIPER.....................$ 38.18 15.08
PAIN0010-008 07/01/2022
Rates Fringes
PAINTER..........................$ 38.18 15.08
PLAS0555-001 06/01/2023
ZONE 1:
Rates Fringes
Cement Masons: (ZONE 1)
CEMENT MASONS DOING BOTH
COMPOSITION/POWER
MACHINERY AND
SUSPENDED/HANGING SCAFFOLD..$ 43.06 19.95
CEMENT MASONS ON
SUSPENDED, SWINGING AND/OR
HANGING SCAFFOLD............$ 42.19 19.95
CEMENT MASONS...............$ 41.33 19.95
COMPOSITION WORKERS AND
POWER MACHINERY OPERATORS...$ 42.19 19.95
Zone Differential (Add To Zone 1 Rates):
Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 3.00
BASE POINTS: BEND, CORVALLIS, EUGENE, MEDFORD, PORTLAND,
SALEM, THE DALLES, VANCOUVER
ZONE 1: Projects within 30 miles of the respective city hall
ZONE 2: More than 30 miles but less than 40 miles from the respective city hall.
ZONE 3: More than 40 miles but less than 50 miles from the respective city hall.
ZONE 4: More than 50 miles but less than 80 miles from the respective city hall.
ZONE 5: More than 80 miles from the respective city hall
TEAM0037-004 06/01/2023
ZONE 1:
TRUCK DRIVERS (See Footnote C):
Rates Fringes
Truck drivers:
GROUP 1.....................$ 32.06 17.18
GROUP 2.....................$ 32.21 17.18
GROUP 3.....................$ 32.36 17.18
GROUP 4.....................$ 32.67 17.18
GROUP 5.....................$ 32.92 17.18
GROUP 6.....................$ 33.12 17.18
GROUP 7.....................$ 33.35 17.18
Zone Differential (add to Zone 1 rates):
Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 2.75
Zone 1 - All jobs or projects located within 30 miles of the respective City Hall
Zone 2 - More than 30 miles and less than 40 miles from the respective City Hall
Zone 3 - More than 40 miles and less than 50 miles from the respective City Hall
Zone 4 - More than 50 miles and less than 80 miles from the respective City Hall
Zone 5 - More than 80 miles from the respective City Hall
BASEPOINTS:
ALBANY ASTORIA BAKER
BEND BINGEN BROOKINGS
BURNS COOS BAY CORVALLIS
EUGENE GOLDENDALE GRANTS PASS
HERMISTON HOOD RIVER KLAMATH FALLS
LAGRANDE LAKEVIEW LONGVIEW
MADRAS MEDFORD MCMINNVILLE
OREGON CITY NEWPORT ONTARIO
PENDLETON PORTLAND PORT ORFORD
REEDSPORT ROSEBURG SALEM
THE DALLES TILLAMOOK VANCOUVER
TRUCK DRIVER CLASSIFICATIONS
GROUP 1: A-frame or hydra-lift truck w/load bearing surface; Articulated dump truck;
Battery rebuilders; Bus or manhaul driver; Concrete buggies (power operated);
Concrete pump truck; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: up to and including 10 cu. yds.; Lift jitneys, fork lifts (all sizes in loading, unloading and transporting material on job site);
Loader and/or leverman on concrete dry batch plant (manually operated); Lubrication man, fuel truck driver, tireman, wash rack, steam cleaner or combination; Pilot car;
Pickup truck; Slurry truck driver or leverman; Solo flat bed and misc. body truck, 0- 10 tons; Team drivers; Tireman; Transit mix and wet or dry mix trucks: 5 cu yds. and under; Water wagons (rated capacity) up to 3,000 gallons
GROUP 2: Boom truck/hydra-lift or retracting crane; Challenger; Dumpsters or similar equipment-all sizes; Dump trucks/articulated dumps 6 cu to 10 cu.; Flaherty spreader driver or leverman; Low bed equipment, flat bed semi-truck and trailer or doubles transporting equipment or wet or dry materials; Lumber carrier, driver-straddle carrier (used in loading, unloading and transporting of materials on job site); Oil distributor driver or leverman; Transit mix and wet or dry mix trucks: over 5 cy yds and including 7 cu. yds; Vacuum trucks; Water Wagons (rated capacity) over 3,000 to 5,000 gallons
GROUP 3: Ammonia nitrate distributor driver; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 10 cu. yds. and including 30 cu. yds., includes articulated dump trucks; Self-Propelled street weeper; Transit mix and wet or dry mix trucks, over 7 cu. yds. and including 11 cu.
yds.; truck mechanic-Welder-Body repairman; Utility and clean-up truck; Water wagons (rated capacity) 5,000 to 10,000 gallons.
GROUP 4: Asphalt Bruner; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 30 cu. yds. and including 50 cu. yds.
includes articulated dump trucks; Fire guard; Transit Mix and Wet or Dry Mix Trucks, over 11 cu. yds. and including 15 cu. yds.; Water Wagon (rated capacity) over 10,000 gallons to 15,000 gallons
GROUP 5: Composite Crewman; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 50 cu. yds. and including 60 cu.yds., includes articulated dump trucks
GROUP 6: Bulk cement spreader w/o auger; Dry Pre-Batch concrete mix trucks; Dump trucks, side, end and bottom dumps, including semi-trucks and trains of combinations thereof: over 60 cu. yds. and including 80 cu. yds. and includes articulated dump trucks; Skid truck
GROUP 7: Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 80 cu. yds. and including 100 cu. yds. Includes articulated dump trucks; Industrial lift truck (mechanical tailgate)
FOOTNOTE C:
HANDLING OF HAZARDOUS WAST MATERIALS -(LABORERS, POWER EQUIPMENT OPERATORS, AND TRUCK DRIVERS): Personnel in all craft classifications subject to working inside a federally designated Hazardous Waste perimeter shall be eligible for compensation in accordance with the following group schedule relative to the level of Hazardous Waste as outline in the specific Hazardous Waste Project Site Safety Plan:
H-1 Base Wage Rate when on a hazardous waste site when not outfitted with protective clothing.
H-2 Class ""C"" Suit - Basic hourly wage rate plus $1.00 per hour, fringes plus $0.15.
H-3 Class ""B"" Suit - Basic hourly wage rate plus $1.50 per hour, fringes plus $0.15.
H-4 Class ""A"" Suit -Basic hourly wage rate plus $2.00 per hour, fringes plus $0.15.
* SUOR1991-003 04/01/1991
Rates Fringes
Timber Sales Roads:
LABORERS....................$ 8.35 ** 4.30
OPERATING ENGINEERS.........$ 10.37 ** 4.15
POWER SAW, DRILLER,
POWDERMAN...................$ 9.12 ** 4.30
TEAMSTERS...................$ 9.74 ** 3.74
WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.
** Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20) or 13658 ($12.90). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017.
If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking.
Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.
Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).
The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).
Union Rate Identifiers
A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey.
Example: PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.
Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.
Survey Rate Identifiers
Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana.
2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.
Survey wage rates are not updated and remain in effect until a new survey is conducted.
Union Average Rate Identifiers
Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination.
08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.
A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.
WAGE DETERMINATION APPEALS PROCESS
1.) Has there been an initial decision in the matter? This can be:
* an existing published wage determination
* a survey underlying a wage determination
* a Wage and Hour Division letter setting forth a position on a wage determination matter
* a conformance (additional classification and rate) ruling
On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour National Office because National Office has responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.
With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:
Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:
Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.
3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board).
Write to:
Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
4.) All decisions by the Administrative Review Board are final.
END OF GENERAL DECISION"
File details come from the government source that posted it. Updated .