12_Special_Packaging_Instructions_II.pdf
PDF 567 KB Posted
- Attached to
- B-1B Escape Handles Federal contract opportunity
- Solicitation number
- FA821320R3023
About this file
This document contains instructions for special packaging of items for a federal contract solicitation. The solicitation is for escape handles used on the B-1B aircraft. The Air Force Materiel Command Lifecycle Management Center is seeking to procure 36 escape handles with National Stock Number 1377-01-207-7090ES and part number 2674300-301-02, 48 handles with NSN 1377-01-207-7091 and part number 2674200-201-02, and 16 handles with NSN 1377-01-209-3847 and part number 2674100-101-03 from the sole-source manufacturer United Propulsion Co, Ltd. The packaging instructions specify how to wrap, bag, cushion, and label items within shipping containers to prevent damage in accordance with international standards for preventing the spread of invasive species by wood packaging materials.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment_04.pdf | ||
| Amendment_03.pdf | ||
| Amendment_03.pdf | ||
| Amendment_02.pdf | ||
| Solicitation FA821320R3023_updated.pdf | ||
| Solicitation FA821320R3023_Amendment_01.pdf | ||
| 15_Bid_Sets.doc | DOC document | |
| 5_REHIP_of_HAZMAT.pdf | ||
| 4_E7034_Rework_and_Repari_of_Nonconforming_Material.doc | DOC document | |
| 3_Quality_Assurance_Letter_of_Instruction.pdf | ||
| 9_Contract_Data_Requirements_List.pdf | ||
| 2_Ammunition_Data_Card.doc | DOC document | |
| 14_EDL-20-77090.pdf | ||
| 1_Airmmunition_Specification.pdf | ||
| 10_AFMC_Form_158_Packaging_Requirements.pdf | ||
| 7_Report_of_Shipment.doc | DOC document | |
| 14_EDL-20-93847.pdf | ||
| 14_EDL-20-77091.pdf | ||
| Solicitation FA821320R3023.pdf | ||
| 12_Special_Packaging_Instructions.pdf | ||
| 14_EDLs-20-50070.pdf | ||
| 8_CADPAD_Item_Marking.pdf | ||
| 6_DD_Form_1653_Transportation_Data.pdf | ||
| 13_Item_Descriptions.pdf | ||
| 16_JQRS.pdf |
Show all 25
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 01 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. MAY PLACE UP TO 20 ITEMS IN SHIPPING CONTAINER.
2. WRAP ITEM WITH REF.-3 AND PLACE INTO REF.-2, BARRIER BAG. EXPEL AIR AND SEAL. USE CUSHIONING, REF.-1, TO
PREVENT BAGS FROM TOUCHING SHIPPING CONTAINER AND PREVENT MOVEMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS
LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING
MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT)
MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS
REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR
REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM
NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
File details come from the government source that posted it. Updated .