12_Special_Packaging_Instructions.pdf
PDF 396 KB Posted
- Attached to
- B-1B Escape Handles Federal contract opportunity
- Solicitation number
- FA821320R3023
About this file
This document provides packaging and shipping instructions for critical safety items procured for the B-1B aircraft escape system. The solicitation seeks 36 B-1B escape handles with national stock number 1377-01-207-7090ES and part number 2674300-301-02, 48 handles with national stock number 1377-01-207-7091 and part number 2674200-201-02, and 16 handles with national stock number 1377-01-209-3847 and part number 2674100-101-03 from sole source manufacturer United Propulsion Co, Ltd for the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. The instructions specify wrapping, cushioning, sealing and marking requirements for wood packaging materials to prevent the spread of invasive species in accordance with International Standards for Phytosanitary Measures.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment_04.pdf | ||
| Amendment_03.pdf | ||
| Amendment_03.pdf | ||
| Amendment_02.pdf | ||
| Solicitation FA821320R3023_Amendment_01.pdf | ||
| Solicitation FA821320R3023_updated.pdf | ||
| 1_Airmmunition_Specification.pdf | ||
| 10_AFMC_Form_158_Packaging_Requirements.pdf | ||
| 7_Report_of_Shipment.doc | DOC document | |
| 14_EDL-20-93847.pdf | ||
| 14_EDL-20-77091.pdf | ||
| Solicitation FA821320R3023.pdf | ||
| 14_EDLs-20-50070.pdf | ||
| 15_Bid_Sets.doc | DOC document | |
| 5_REHIP_of_HAZMAT.pdf | ||
| 4_E7034_Rework_and_Repari_of_Nonconforming_Material.doc | DOC document | |
| 3_Quality_Assurance_Letter_of_Instruction.pdf | ||
| 9_Contract_Data_Requirements_List.pdf | ||
| 2_Ammunition_Data_Card.doc | DOC document | |
| 14_EDL-20-77090.pdf | ||
| 12_Special_Packaging_Instructions_II.pdf | ||
| 8_CADPAD_Item_Marking.pdf | ||
| 6_DD_Form_1653_Transportation_Data.pdf | ||
| 13_Item_Descriptions.pdf | ||
| 16_JQRS.pdf |
Show all 25
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 07 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. WRAP ITEM WITH REF.-3. PLACE WRAPPED ITEM INSIDE BAG, REF.-2, REMOVE AIR AND SEAL.
2. TO PREVENT BAGS FROM TOUCHING SHIPPING CONTAINER AND PREVENT MOVEMENT USE CUSHIONING, REF.-1
AS REQUIRED.
3. SEAL CONTAINER WITH TAPE, REF.-4.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .