1-ODOT_106_Group10_2018KCLip_Catalog_Sheet.pdf
PDF 334 KB Posted
- Attached to
- Competitive Selection OH|DOT10626-1
- Contract number
- DOT10626-1
- Issued by
- Ohio
About this file
This document is a product catalog sheet for the Eberle Design Inc. (EDI) 2018KCL Type 170/2070 18 Channel Signal Monitor, designed for traffic signal control systems. The document is specifically aligned with California Department of Transportation (Caltrans) specifications, including TSCE Specifications from 1/89 and TEES from March 2009. The product is manufactured in the United States and is ISO 9001:2015 registered, indicating compliance with international quality management standards.
The 2018KCL Signal Monitor is an advanced traffic signal monitoring device available in two models: 2018KCLip with an Ethernet port and 2018KCL with an EIA-232 port. It features enhanced monitoring capabilities including conflict detection, voltage monitoring, signal color tracking, and event logging. Key technological innovations include a removable Datakey memory device for configuration, a Setup Wizard for easy programming, and LEDguard signal thresholding. The monitor provides comprehensive fault detection and diagnostic capabilities, supports Flashing Yellow Arrow Protected Permissive Left Turn (PPLT) operations, and can store up to 100 event records with timestamping. It is designed to be fully compatible with Type 170, 179, and 2070 Controller Units.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2018KCL Catalog Sheet –082819 Designed, Manufactured and Tested in the United States of America ISO 9001:2015 Registered
Type 170/2070 18 Channel Signal Monitor
The EDI 2018KCL Signal Monitor is designed to upgrade the capabilities of the basic 210 / 2010 monitor used in Type 170 / 179 Output Files. The unit is fully compatible with the requirements of the 170, 179, and 2070 Controller Units. The 2018KCL utilizes enhanced monitoring functions to increase cabinet fault coverage, providing additional assurance that equipment malfunctions will be detected and diagnosed properly.
A removable DatakeyTM memory device contains all the monitor set-up information and completely eliminates the need for a diode Program Card, soldered jumpers and DIP switches.
Model 2018KCLip: 18 channel with Ethernet Port Model 2018KCL: 18 channel with EIA-232 Port
OPERATIONAL FEATURES
Enhanced 210 Monitoring Functions: The 2018KCL meets all requirements of the Caltrans "TSCE Specifications 1/89" and Caltrans
TEES, March 2009. Basic fault coverage includes Conflict, 24Vdc, and CU Watchdog monitoring. Red Monitoring senses the absence of signals on a channel, and requires the output file to be wired for Red signals. Dual Indication Monitoring detects simultaneous active signals on a channel. Clearance Monitoring ensures sequencing of signals with a proper minimum yellow clearance interval for both vehicle and pedestrian channels. AC Line Monitoring detects and responds to low AC Line voltages as well as interruptions with a minimum flash interval.
Datakey Configuration Memory: Complete 2018KCL programming is provided by an interchangeable DatakeyTM nonvolatile memory device. This rugged key stores all 2018KCL configuration parameters and completely eliminates monitor programming using jumpers, diodes, or DIP switches. Ethernet network parameters are also included (firmware version xx56 or greater).
Setup Wizard: Use the MonitorKey® Setup Wizard to automatically and accurately configure the Enhanced settings of the 2018KCL by answering a short series of questions regarding intersection geometry and operation.
Event Logging: The 2018KCL monitor maintains a 100 record nonvolatile event log which contains records of fault events showing the complete intersection status as well as AC Line events, configuration changes, monitor resets, cabinet temperature and true RMS voltages. A real time clock time-stamps each log event with time and date.
RYG Full Intersection Display: The Full Intersection display uses Red, Yellow, and Green LEDs to show active colors of all channel inputs simultaneously for real-time intersection status.
EDI RMS-Engine: A DSP coprocessor converts ac input measurements to True RMS voltages, virtually eliminating false sensing due to changes in frequency, phase, or sine wave distortion.
LEDguard®: This EDI innovative signal thresholding technique is used to increase the level of monitoring protection when using LED based signal heads.
Recurrent Pulse Detection: The Recurrent Pulse (RP) Detection function supplements the Conflict, Dual Indication, and Red Fail algorithm. RP Detection works in conjunction with the RMS-Engine to detect faults that are pulsing or intermittent in nature.
Flashing Yellow Arrow PPLT: Three operational modes are built-in for support of the MUTCD Flashing Yellow Arrow PPLT operation depending on the number of load switches in the cabinet.
Communications to Controller Unit or PC: An EIA-232 serial port or optional Ethernet port (2018KCLip) provides access to status and event logs by a local or TMC computer running EDI ECcom Windows based software.
Signal Sequence History Display: Five Signal Sequence History logs stored in nonvolatile memory each graphically display 30 seconds of signal status prior to each fault event. The resulting display eases diagnosing of intermittent and transient faults by viewing the exact signal states that the monitor sensed.
Datakey is a trademark of Datakey Electronics Inc. MonitorKey and LEDguard are trademarks of Eberle Design Inc.
MonitorKey® Programming
Tool Sold Separately
File details come from the government source that posted it. Updated .