03_Duramax_SC-424PFDP_Keel-Cooler-Installation-Drawing.pdf

PDF 116 KB Posted

Attached to
ADF&G Request for Information (RFI) - RV Medeia Repower
Solicitation number
Not on record
Issued by
Alaska

About this file

This is a technical installation drawing for a Duramax Marine keel-cooler system, model SC-424PFDP, prepared by Duramax Products, LLC, headquartered in Hiram, Ohio. The document is a standard engineering drawing providing detailed specifications and dimensional requirements for the installation of the keel-cooler equipment. The drawing includes comprehensive technical measurements in inches with specified tolerances (dimensions to 3 decimal places, fractions, and 2-place angles), material specifications, and revision control information. The drawing is marked as a confidential quote document with a revision date of May 2, 2000 and is identified as sheet 1 of 1, indicating this is a single-page technical specification document for procurement or manufacturing purposes.

The document explicitly notes that this is an uncontrolled print not authorized for purchasing, manufacturing, or inspection purposes, suggesting it is a preliminary or reference document rather than a finalized procurement specification. No pricing terms, contract amounts, set-asides, funding sources, or award dates are referenced in this technical drawing. The document serves as a reference specification for the SC-424PFDP keel-cooler installation with key dimensional parameters including overall length of 54 inches and width of 36 inches, along with detailed component specifications necessary for proper installation and system integration.

View the file

Other files

File Type Posted
21_Photo_2019-01_Port-Main-Replacement_Deck-Opening-Cut-Above-ER.jpg JPG image
27_Photo_Prior-Deck-Opening_Exhaust-Manifold-Lowered-Through-Deck.jpg JPG image
33_Photo_2026-07_Port-Gear-Nameplate_Twin-Disc-MG530_Full.jpg JPG image
Attachment 2 - Stablility Booklet.pdf PDF
47_Photo_2026-07_Machinery-Data-Card_Handwritten.jpg JPG image
20_Deck-Crane_North-American-MCK-1240_Load-Chart.pdf PDF
39_Photo_2026-07_Stbd-Gear-Nameplate_Ratio-and-Serial.jpg JPG image
16_Maxim-Silencers_M42-Super-Critical_Data-Sheet.pdf PDF
01_EBDG-26075-062-0_Repower-Conceptual-Study_RevP0.pdf PDF
ADFG Request for Information (RFI) - RV Medeia Repower.pdf PDF
38_Photo_2026-07_Stbd-Gear-Nameplate_Model-and-BOM.jpg JPG image
25_Photo_Prior-Deck-Opening_Cut-Line-Layout.jpg JPG image
23_Photo_2019-01_Port-Main-Replacement_ER-Through-Opening-After-Removal.jpg JPG image
29_Photo_2026-07_ER-Main-Engine_Gear-End-and-Exhaust-Lagging.jpg JPG image
32_Photo_2026-07_ER-Marine-Gear-Top-with-Exhaust-Risers-Above.jpg JPG image
Attachment 1 - Cost Schedule.pdf PDF
45_Photo_2026-07_ER-Looking-Aft_Mains-and-Exhaust-Risers-1.jpg JPG image
28_Photo_2026-07_ER-Overview_Between-Mains-Looking-Along-Centerline.jpg JPG image
40_Photo_2026-07_ER-Main-Engine_Exhaust-Risers-and-Cooling-Piping.jpg JPG image
42_Photo_2026-07_ZF-MicroCommander-Control-Processor_Stbd.jpg JPG image
02_EBDG-26075-256-2_FW-Cooling-System-Mods_RevP1-Preliminary.pdf PDF
11_Dwg-C2412-1_Hydrostatic-Curves-of-Form.pdf PDF
43_Photo_2026-07_ZF-MicroCommander-Control-Processor_Port.jpg JPG image
10_Dwg-U193-3_Lines-Plan.pdf PDF
09_Dwg-S2-192_Small-Vessel-Transverse-Frames.pdf PDF
19_Port-Main_Engine-Run-In-Report_Pacific-Power-Group_2018-11.pdf PDF
08_Dwg-U184-56_Transverse-Frames-and-Longitudinal-Section.pdf PDF
30_Photo_2026-07_ER-Main-Engine_Outboard-Side-and-Piping.jpg JPG image
12_Dwg-C2412-2_Cross-Curves.pdf PDF
18_Detroit-Diesel_Exhaust-System-Data_16V-92N-Highlighted.pdf PDF
05_Dwg-U192-S1_General-Scantling.pdf PDF
06_Dwg-U192-S4_Transverse-Frames.pdf PDF
04_Dwg-U192-MI_Shafting-Installation.pdf PDF
15_Silencer-Drawing_Stbd_8in-ANSI150_2022-10-12.pdf PDF
41_Photo_2026-07_ER-Main-Engine_Exhaust-Risers-and-Air-Cleaner.jpg JPG image
46_Photo_2026-07_ER-Looking-Aft_Mains-and-Exhaust-Risers-2.jpg JPG image
17_Detroit-Diesel_16V-92_Engine-Performance-Curve_E4-8162-12-6.pdf PDF
37_Photo_2026-07_Port-Main_Block-Casting-Number-Closeup.jpg JPG image
24_Photo_2019-01_Port-Main-Replacement_Old-Engine-and-Gear-on-Deck.jpg JPG image
35_Photo_2026-07_Port-Gear-Nameplate_Ratio-and-Serial.jpg JPG image
44_Photo_2026-07_Port-Exhaust-Elbow_Material-ID-Tag.jpg JPG image
14_Silencer-Drawing_Port_8in-ANSI150_2022-10-12.pdf PDF
26_Photo_Prior-Deck-Opening_Opening-From-Above.jpg JPG image
07_Dwg-U192-S5_Transverse-Frames.pdf PDF
31_Photo_2026-07_ER-Marine-Gear-and-Foundation.jpg JPG image
22_Photo_2019-01_Port-Main-Replacement_Old-Engine-Visible-Through-Opening.jpg JPG image
34_Photo_2026-07_Port-Gear-Nameplate_Model-and-BOM.jpg JPG image
36_Photo_2026-07_Port-Main_Block-Casting-Number.jpg JPG image
Show all 48

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MATERIAL

UNLESS OTHERWISE SPECIFIED

ANGLES –

2 PLACE DIMENSIONS –

3 PLACE DIMENSIONS –

FRACTIONS –

TOLERANCES:

DIMENSIONS ARE IN INCHES

APPROVED

PREPARED

CHECKED

17990 GREAT LAKES PARKWAY, HIRAM OHIO 44234 U.S.A.

CODE

SCALE

SIZE

D

DATE

DWG. NO. REV.

SHEET

Phone: 440-834-5400 Fax: 440-834-4950 On The Web At: www.duramax-marine.com

DURAMAX PRODUCTS

ohnson R

R

REV

REVISIONS

DESCRIPTION APPROVED BY DATE

DURAMAX MARINE

R

LLC

C L R L

R L L C

CONFIDENTIAL INFORMATION OF DURAMAX MARINE . BY REQUESTING OR RETAINING THE INFORMATION CONTAINED HEREIN YOU AGREE TO

MAINTAIN THIS INFORMATION IN CONFIDENCE AND NEITHER USE IT FOR ANY PURPOSE NOT AUTHORIZED IN WRITING BY DURAMAX MARINE NOR

DISCLOSE THIS INFORMATION TO ANY PERSON THAT IS NOT YOUR EMPLOYEE. IF THESE TERMS ARE NOT ACCEPTABLE, YOU MUST RETURN ALL

OF OUR INFORMATION AND RETAIN NO COPIES.

STANDARD SC-424PFDP-30 THRU 231 QUOTE DWG

C

SC

1/3 5-2-00 1 OF 1

JJG

1/16

.015

.030

B

22 1/16

11 1/32

24 1/2

Ø6 REF

B.C.

45° TYP

Ø 7 1/2

REF TYP

4 7/16

REF

2 3/4

15/16

15/16 REF

1/4

GASKET

TYP

5 15/16

REF

1/4

TYP

3/4

GASKET

TYP

C

5 1/2

A

C

3/4

GASKET

TYP 1/4

TYP

DURAMAX MARINE

R

UNCONTROLLED PRINT

THIS PRINT MAY NOT BE USED FOR

PURCHASING, MANUFACTURING, OR

LLC

INSPECTION

PATENTED

DD= 54"

A =

C18:

JW = 36"

AC = 33"

File details come from the government source that posted it. Updated .