Bridge Beam Slabs

Solicitation # BID19325
Posted 5/6/25, 12:00 AM
No Updates
Due 5/16/25, 11:30 AM
Source
No public source available
Similar Opportunities
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, is seeking a qualified vendor to provide a prefabricated modular bridge for Merrimack County through Request for Bid (RFB) 182-25. The procurement requires a specific 60-foot long bridge with a 16-foot clear travel width, constructed entirely of domestic steel and designed in accordance with AASHTO 2012 LRFD Bridge Design Standards. Key technical requirements include full-dimension steel end...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services is soliciting bids for Request for Bid (RFB) 160-25, specifically seeking two prefabricated modular "hybrid" bridges for Merrimack County. The bridges must meet precise technical specifications, including a minimum 15' clear deck width, two modular steel sections (8' wide x 40' long) with pre-installed timber decking, and HS25 capacity (45-ton/5-axle tractor-trailer). Each bridge...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, is soliciting bids for Request for Bid (RFB) 183-25, specifically targeting the procurement of ChromX 9100 Reinforcing Steel for Merrimack County. The procurement includes 1,152 ChromX 9100 Reinforcement #5 x 20' bars, 792 ChromX 9100 Reinforcement #6 x 20' bars, and multiple splice bars in varying lengths and grades. All materials must meet ASTM A1035 Grade 100 standards and be delivered in...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services is seeking bids for crane mats through Request for Bid (RFB) 190-25, specifically targeting the Department of Natural and Cultural Resources in Merrimack County. The procurement involves acquiring a total of 14 oak crane mats, including 8 mats measuring 12"x4'x24" and 6 mats measuring 12"x4'x30", which are intended for a one-time order. Vendors must submit electronic bids...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, is seeking bids for Request for Bid (RFB) 137-25, which involves procuring 5 heavy-duty polyethylene vertical tanks for the New Hampshire Department of Transportation (NHDOT). The specific tanks must be 2,500 vertical gallon capacity, measuring 95 inches in diameter and 91 inches in height, with a 1.9 specific gravity rating. Additional requirements include a 16-inch fill opening, one 2-inch...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, has issued a Request for Bid (RFB 177-25) for construction equipment and attachments specifically targeting three distinct equipment purchases for state departments. The procurement is focused on acquiring a Turfmaker 550 with accessories for the New Hampshire Department of Transportation (NHDOT) in Swanzey, a Sno Pusher with coupler mount for NHDOT, and a trailer-mounted brush chipper for...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services, has issued Request for Bid (RFB) #3037-25 for Building Materials and Hardware, seeking to establish a comprehensive contract for supplying building materials and hardware to state agencies and eligible participants. The procurement covers an extensive range of product categories including cement and masonry, flooring materials, hand tools, hardware, heating and cooling equipment, locks, outdoor...
The State of New Hampshire, specifically Merrimack County, is seeking bids for a specialized procurement of loader mounted wing posts through Bid Request 155-25. The procurement involves retrofitting two existing Caterpillar 926M All-Wheel Drive Articulated Wheel Loaders (one 2016 and one 2017 model) with new hydraulic plow wing towers compatible with the machines' existing OEM hydraulic systems. Acceptable manufacturers for the wing posts include Viking, American, and HP Fairfield, with...
The State of Maine's Department of Administrative and Financial Services, through the Office of State Procurement Services, is seeking quotations for a concrete plank and curb order targeting Kennebec County infrastructure projects. The procurement involves procuring 65 6"x8' concrete planks, 130 6"x10' concrete planks, and 32 6' Straight Street Curbs to be delivered to 1009 Brunswick Road, Richmond, ME by September 1st, 2025. The technical specifications require concrete with a 5000...
The New Hampshire Department of Administrative Services, Division of Procurement and Support Services is seeking bids for a flooring replacement project located at 129 Pleasant Street in Concord, NH. The procurement (Bid #192-25) involves removing and disposing of approximately 2,500 square feet of existing vinyl composite tile and cove base, and subsequently furnishing and installing new flooring materials. Specific requirements include providing neutral-colored vinyl composite tile with...

The New Hampshire Department of Administrative Services is seeking a bid for 8 pre-stressed bridge beam slabs, solicitation number 193-25, targeting a specific project for the New Hampshire Department of Transportation (NHDOT) located in Weare, NH. Each beam slab will measure 4' x 31'8" and must be delivered within 90 days after receipt of the purchase order. The bid is due on May 16, 2025, at 11:30 AM Eastern Time, with bid solicitation originally distributed on May 6, 2025. Vendors must provide detailed technical specifications compliant with NHDOT 2016 Standard Specifications and AASHTO 2024 LRFD Bridge Design Specification, including precise requirements for prestressed concrete components with a 6000 psi compressive strength at 28 days. Evaluation criteria will focus on the lowest conforming bid from a responsible vendor, with preference given to environmentally friendly products and vendors utilizing SmartWay Transport partners to promote fuel efficiency and reduce greenhouse gas emissions.

The procurement does not specify explicit set-aside designations for disadvantaged enterprises, though standard state procurement practices typically encourage diverse vendor participation. The contract represents a one-time order with a firm delivery point, requiring vendors to provide a comprehensive one-year warranty covering 100% of parts, shipping, labor, travel, lodging, and associated expenses. While specific budget ranges are not explicitly detailed, the bid involves specialized engineering components necessitating fabrication certification from the Prestressed Concrete Institute. Electronic invoicing will be required, with payment processed 30 days after invoice receipt and item acceptance. The State reserves the right to reject any or all bids, maintaining flexibility in the procurement process. Vendors must demonstrate technical capabilities in manufacturing precast, pre-tensioned concrete structural members and comply with rigorous quality control and technical specifications outlined in the solicitation documents.

Generated 5/7/25, 12:45 PM