VeriSurf Coordinate Measuring Machinery (CMM) Software, Training, and License renewals – SOLE SOURCE
Closed Solicitation Posted
- Solicitation number
- N0016425Q0736
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 513210 Software Publishers
- Place of performance
- Fenton, Michigan 48430, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Surface Warfare Center (NSWC) Crane has issued a sole source solicitation for VeriSurf Coordinate Measuring Machinery (CMM) software, training, and license renewals. The procurement includes a perpetual license for one seat of the current VeriSurf Renishaw UCC CMM Programming & Inspection Suite software, which must support various probes including REVO touch, REVO Scanning, REVO SFP2, and REVO RUP1, with capabilities for importing CAD files, performing 2D/3D inspections, generating automatic path simulations, and conducting GD&T analysis. The contract also requires comprehensive onsite training for up to four students over three days, covering equipment setup, operator usage, and maintenance/troubleshooting. This solicitation is being conducted under FAR 13.106-1 as a sole source procurement because the items are peculiar to one manufacturer. Offers must be submitted via email to kathy.j.davidson.civ@us.navy.mil by July 25, 2025, at 3:00 PM Eastern Time.
This procurement does not utilize any set-aside designations and is specifically targeted to OMNI-TECH CALIBRATION SERVICES, INC., located in Fenton, Michigan. The contract structure includes a base year software license with 12 months of maintenance and four optional yearly license renewals for years two through five. The solicitation is classified under NAICS code 513210 (Software Publishers) and PSC code 7A20 (IT and Telecom - Application Development Software). The software will be installed on a REVO scanning head equipped CMM located in Building 122 at the NSWC Crane facility. All contractor personnel must be U.S. citizens and comply with security requirements, with software updates to be provided via FTP within 30 days of release. The Navy reserves the right to exercise optional renewal years based on equipment condition, program requirements, and available funding.
Notice text
N00164-25-Q-0736 - VeriSurf Coordinate Measuring Machinery (CMM) Software, Training, and License renewals – SOLE SOURCE - FSC/PSC 7A20 - NAICS 513210
ISSUE DATE 18 JUL 2025 – CLOSING DATE 25 JUL 2025 – 3:00 PM Eastern Time
Naval Surface Warfare Center (NSWC) Crane has a requirement for VeriSurf Coordinate Measuring Machinery (CMM) Software, Training, and License renewals.
The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, limited sources or brand name only to OMNI-TECH CALIBRATION SERVICES, INC, 1460 Torrey RD STE A, Fenton, Michigan 48430-33, under the authority of FAR 13.106-1. This is being solicited on a sole source/brand name only basis because, Items peculiar to one manufacturer. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
CLIN 0001 - RENISHAW UCC CMM PROGRAMMING &
INSPECTION SUITE
CLIN 0002 - Verisurf comprehensive onsite training program
CLIN 0003 - OPTION#1 - YEAR 2 RENISHAW UCC CMM PROGRAMMING & INSPECTION SUITE MAINTENANCE
CLIN 0004 - OPTION#2 - YEAR 3 RENISHAW UCC CMM PROGRAMMING & INSPECTION SUITE MAINTENANCE
CLIN 0005 - OPTION#3 - YEAR 4 RENISHAW UCC CMM PROGRAMMING & INSPECTION SUITE MAINTENANCE
CLIN 0006 - OPTION#4 - YEAR 5 RENISHAW UCC CMM PROGRAMMING & INSPECTION SUITE MAINTENANCE
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.
This solicitation is being issued pursuant to the procedures at FAR Part 13 as a written. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-25-Q-0736 is hereby issued as an attachment hereto.
All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation.
For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.
Offers shall be e-mailed to kathy.j.davidson.civ@us.navy.mil. All required information must be received on or before 25 JUL 2025 – 3:00 PM Eastern Time.
Files
| File | Type | Posted |
|---|---|---|
| A5_SOW_07102025.pdf | ||
| N0016425Q0736.pdf | ||
| A8_CDRLs_A001_ESOH Plan.pdf | ||
| A8_CDRLs_A002_Accident Report.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Digital microscope VHX-XL series | Naval Sea Systems Command | No set-aside | |
| Celestron gold package | Naval Sea Systems Command | No set-aside | |
| Notice of intent to award a sole source | Naval Supply Systems Command | No set-aside | |
| Inertial measuring, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| REMUS 300 Training | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity