V250 and TMS kit
Closed Pre-Solicitation Posted
Not the latest version. See the latest solicitation from .
- Solicitation number
- W58RGZ25P0016
- Agency
-
ACC Redstone
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Place of performance
- Redstone Arsenal, Alabama 35898, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Futures Command, Combat Capabilities Development Command Aviation and Missile Center at Redstone Arsenal, Alabama, is conducting market research to procure a Torque Measurement System (TMS) Kit capable of testing a T408 Turbine Engine with a Variable-Geometry, Radial Outflow Compressor Air Dynamometer 250 (V250 Dyno). The procurement includes two primary deliverables: a V250/T408 Torque Measurement System Kit with shaft-to-engine components, plumbing, calibration equipment, and electronics, plus a V250 Application Study for the T408 Aircraft Engine that evaluates interface requirements and test parameters. Interested businesses must submit unclassified capability statements by July 10, 2025, demonstrating their company profile, small/large business status, and most critically, proof of possession or authorized access to necessary proprietary data from Concepts NREC, the original equipment manufacturer. Responses must be submitted to Leighton Bragg at Leighton.e.bragg.civ@army.mil or Al Condino at al.j.condino.civ@army.mil, with telephone inquiries not accepted. The government will use the market research responses to determine whether to proceed with a small business set-aside or full and open competition.
Currently, no set-aside designation has been applied, though the Army indicates this requirement may be set aside for small business or procured through full and open competition based on the responses received to this sources sought notice. Concepts NREC is identified as the only known capable source with access to the proprietary data necessary to fulfill this requirement, positioning them as the likely incumbent or primary contractor. The solicitation number W58RGZ25P0016 has been assigned to this requirement, though no specific award values or budget ranges have been disclosed in the pre-solicitation documentation. The procurement timeline shows the sources sought notice was posted on June 26, 2025, with responses due by July 10, 2025, providing interested parties with approximately two weeks to prepare and submit their capability statements. Small businesses claiming set-aside eligibility must demonstrate their ability to perform at least 50% of the work themselves in terms of cost of performance.
Notice text
The U.S. Army Futures Command, Combat Capabilities Development Command (DEVCOM) Aviation and Missile Center (AvMC), Prototype Integration Facility (PIF), at Redstone Arsenal, Alabama, is issuing this sources sought notice and intent to sole source as a means of conducting required market research to determine if any capable sources exist to provide a Torque Measurement System (TMS) Kit capable of testing a T408 Turbine Engine with a Variable-Geometry, Radial Outflow Compressor (VAROC) Air Dynamometer 250 (V250 Dyno). The only known capable source with access to the proprietary data necessary to provide this requirement is Concepts, NREC, the Original Equipment Manufacturer (OEM).
Based on the responses to this notice, this requirement may be set-aside for small business or procured through full and open competition. Telephone inquiries will not be accepted or acknowledged.
Interested businesses must submit an UNCLASSIFIED capability statement.
Each capability statement shall include/address at a minimum:
(1) Small/Large Business Status: A company profile to include number of employees, location(s), SAM Unique Entity Identifier (UEI), CAGE Code, and a statement regarding current small/large business status. Indicate whether your entity qualifies as a Small Disadvantaged, Small Disadvantaged Veteran Owned Small Business, Women-Owned, 8(a), Hub Zone or Service-Disabled Veteran-Owned Small Business Concern. If claiming small business status, provide an explanation of your company's ability to perform at least 50% of the work itself in terms of cost of performance.
(2) The only known capable source with the proprietary data necessary to procure this supply is the Original Equipment Manufacturer, Concepts NREC. The Government does not have access to or rights in this proprietary data sufficient to compete this requirement; however, any interested party wishing to demonstrate its capability must show that it currently possesses or has authorized access to the necessary proprietary data, or has a viable plan to obtain, generate, or otherwise secure authorized access to the necessary proprietary data from Concepts, NREC.
This notice is for informational purposes only. This is not a solicitation and shall not be construed as a commitment by the Government. If a solicitation is released, it will be synopsized on SAM.gov. It is the responsibility of potential offerors to monitor SAM.gov for additional notices for this requirement.
Respond by 10 July 2025 to Leighton Bragg, Leighton.e.bragg.civ@army.mil, or Al Condino, al.j.condino.civ@army.mil.
Files
| File | Type | Posted |
|---|---|---|
| Product Description_V250 and T408 TMS Kit.pdf | ||
| Sources Sought_V250 and T408 TMS Kit.docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| V250 and TMS kit | Solicitation | |
| V250 and TMS kit | Pre-Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Sources Sought for Overhaul/Repair/Upgrade of the UH-60/AH-64 T700 Turbine Engine Supervisory Control Unit | ACC Redstone | No set-aside | |
| Remanufacture of KC-135 Gearbox Assembly, NSN 1680007986073FL | Air Force Sustainment Center | Total Small Business | |
| GearboxAssy_End_Item_F100_NSN_2840015493031NZ_PN_4087025-801 | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity