Type N and 2. 4 mm Power Transfer Standards
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- NB672010-26-01385
- Agency
-
National Institute of Standards and Technology
Department of Commerce
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334515 Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Place of performance
- United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The National Institute of Standards and Technology seeks firm-fixed-price quotations for eight line items of Type N and 2.4 mm power transfer standards totaling 12 units, with quotations due June 22, 2026 (extended from June 15) and questions due June 11. The procurement is unrestricted and conducted as a simplified commercial acquisition under FAR Part 12.
Place of performance and acceptance is NIST-Boulder, 325 Broadway, Boulder, Colorado 80305, with delivery required within four months of contract award. The NAICS code is 334515, Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a small business size standard of 750 employees. The PSC is 6625, Electrical and Electronic Properties Measuring and Testing Instruments.
Line items comprise three Type N impedance-matched standards, one Type N open circuit, one Type N short circuit, one Type N mismatch circuit, three 2.4 mm impedance-matched standards, one 2.4 mm open circuit, one 2.4 mm short circuit, and one 2.4 mm mismatch circuit. Type N standards must operate DC to 18 GHz with reflection coefficient magnitude less than 0.10; 2.4 mm standards must operate DC to 50 GHz with reflection coefficient magnitude less than 0.15. All impedance-matched units require a 50-ohm coaxial interface, RF termination, maximum input power of at least 20 dBm, DC heater with four-wire configuration and 400–600 ohm resistance, and thermopile with minimum sensitivity of 150 mV/W. Unit dimensions may not exceed 90 mm × 30 mm × 30 mm (Type N) or equivalent footprint (2.4 mm); mass limits are 150 grams (Type N) or 120 grams (2.4 mm).
Vendors must possess an active Export Control Classification Number and active UEI registration on SAM.gov at award. Quotations must be submitted electronically in three volumes: Technical Quotation, Price Quotation with shipping and delivery costs included, and Terms and Conditions acceptance. Award will be made to the lowest-priced, technically acceptable quotation from a responsible quoter without discussions. Amendment 01 extended the deadline to allow increased competition.
Notice text
2 versions
Update #2 · Latest ·
Amendment 01 – This amendment changes the due date from 1:00 PM MT, 6/15/2026 to 1:00 PM MT, 6/22/2026 to allow for increased competition.
(I) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in part 12 - Acquisition of Commercial Products and Commercial Servicesas supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(II) The solicitation number is NB672010-26-01385 and this solicitation is a Request for Quotation (RFQ). This acquisition is being solicited on an unrestricted basis.
(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 dated 3/13/2026. This document includes references to the Federal Acquisition Regulation (FAR). Per Procurement Memorandum (PM) 2026-06, the Department of Commerce has issued a class deviation to implement the Revolutionary FAR Overhaul (RFO) and adopt the RFO model deviated text.
(IV) The associated North American Industry Classification System (NAICS) code for this procurement is 334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals with a small business size standard of 750 employees.
(V) All quoters shall provide a firm-fixed-price quotation for the following line item(s):
Contract Line Item Number (CLIN) QTY UNIT UNIT PRICE APPLICABLE DISCOUNTS TOTAL
0001 3 EA
Type N Power Transfer Standard, Impedance-Matched
Per attached specifications
0002 1 EA
Type N Power Transfer Standard, Open Circuit
Per attached specifications
0003 1 EA
Type N Power Transfer Standard, Short Circuit
Per attached specifications
0004 1 EA
Type N Power Transfer Standard, Mismatch Circuit
Per attached specifications
0005 3 EA
2.4 mm Power Transfer Standard, Impedance-Matched
Per attached specifications
0006 1 EA
2.4 mm Power Transfer Standard, Open Circuit
Per attached specifications
0007 1 EA
2.4 mm Power Transfer Standard, Short Circuit
Per attached specifications
0008 1 EA
2.4 mm Power Transfer Standard, Mismatch Circuit
Per attached specifications
TOTAL:
(VI) The requirements for the line items to be acquired above are in the attached Specifications
Attachment #1: Specifications
Attachment #2: Applicable Provisions and Clauses
Update #1 ·
(I) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in part 12 - Acquisition of Commercial Products and Commercial Servicesas supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(II) The solicitation number is NB672010-26-01385 and this solicitation is a Request for Quotation (RFQ). This acquisition is being solicited on an unrestricted basis.
(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 dated 3/13/2026. This document includes references to the Federal Acquisition Regulation (FAR). Per Procurement Memorandum (PM) 2026-06, the Department of Commerce has issued a class deviation to implement the Revolutionary FAR Overhaul (RFO) and adopt the RFO model deviated text.
(IV) The associated North American Industry Classification System (NAICS) code for this procurement is 334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals with a small business size standard of 750 employees.
(V) All quoters shall provide a firm-fixed-price quotation for the following line item(s):
Contract Line Item Number (CLIN) QTY UNIT UNIT PRICE APPLICABLE DISCOUNTS TOTAL
0001 3 EA
Type N Power Transfer Standard, Impedance-Matched
Per attached specifications
0002 1 EA
Type N Power Transfer Standard, Open Circuit
Per attached specifications
0003 1 EA
Type N Power Transfer Standard, Short Circuit
Per attached specifications
0004 1 EA
Type N Power Transfer Standard, Mismatch Circuit
Per attached specifications
0005 3 EA
2.4 mm Power Transfer Standard, Impedance-Matched
Per attached specifications
0006 1 EA
2.4 mm Power Transfer Standard, Open Circuit
Per attached specifications
0007 1 EA
2.4 mm Power Transfer Standard, Short Circuit
Per attached specifications
0008 1 EA
2.4 mm Power Transfer Standard, Mismatch Circuit
Per attached specifications
TOTAL:
(VI) The requirements for the line items to be acquired above are in the attached Specifications
Attachment #1: Specifications
Attachment #2: Applicable Provisions and Clauses
Files
| File | Type | Posted |
|---|---|---|
| RFQ NB672010-26-01385 A01.pdf | ||
| RFQ NB672010-26-01385.pdf | ||
| Atch 2 - Provisions and Clauses.pdf | ||
| Atch 1 - Specifications.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Type N and 2. 4 mm Power Transfer Standards | Award Notice | |
| This notice | Solicitation | |
| SOURCES SOUGHT: Type N and 2. 4 mm Power Transfer Standards | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Brand Name NI – Various PXI/PXIe Test and Measurement Modules | Federal Acquisition Service | Total Small Business | |
| RTD test harness | Naval Supply Systems Command | No set-aside | |
| Keysight Peak Power Analyzer Testing Bundle | Naval Air Warfare Center | No set-aside | |
| Voltmeter | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity