Stinger fuzes and warhead body assemblies

The following amendment W15QKN-19-R-0021 0004 has been posted to extend the solicitation close date to 15 April 2020.

Review the uploaded document to review the changes in detail.

The following amendment W15QKN-19-R-0021 0003 has been posted to extend the solicitation close date to 5 March 2020.

Review the uploaded document to review the changes in detail.

The following amendment W15QKN-19-R-0021 0002 has been posted to amend items in Sections A, G, I, and L in the original solicitation posting.

Review the uploaded document to review the changes in detail.

The following amendment W15QKN-19-R-0021 01 has been posted to amend items in Sections B, C, E, and F in the original solicitation posting.

Review the uploaded document to review the changes in detail.

This is a requirement for the production and delivery of the STINGER M934E6 Fuze, Warhead Body Assembly (WBA), STINGER M934E7 Proximity Fuze, and Warhead Body Assembly with Conformal Antenna (WBA/A). The contractor shall furnish all labor and material to perform the work as described in the Statement of Work (SOW) and as set forth in this solicitation. The associated Technical Data Packages (TDPs) and specifications are listed as attachments in Section J - "List of Attachments" and will be provided upon request.

___________________
Proposals shall be submitted in accordance with the Section L - "Instructions, Conditions, and Notices to Offerors" to the Contract Specialist:
United States Army Contracting Command - New Jersey
ACC-NJ-MC
ATTN: Charis Murray
Bldg. 10 Phipps Road
Picatinny Arsenal, NJ 07806
charis.m.murray.civ@mail.mil
___________________

See attached Solicitation W15QKN19R0021 for further details and information.

Additional Information

In accordance with Title 10 United States Code (U.S.C.) Section 2304(c)(1) as implemented by Federal Acquisition Regulation (FAR) Part 6.302-1 -- Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements, this acquisition is a sole source to the following:

Lockheed Martin Sippican, Inc. Marion, MA 02738

STINGER FUZES AND WARHEAD BODY ASSEMBLIES SYNOPSIS

The U.S. Army Contracting Command-New Jersey (ACC-NJ), on behalf of the Cruise Missile Defense Systems (CMDS) Project Office, intends to issue a solicitation for the production of the following items:

-STINGER M934E6 Fuzes (known as a legacy configuration)

-STINGER M934E7 Fuzes (known as a proximity configuration)

-Warhead Body Assemblies (WBAs)

-Warhead Body Assemblies with Antennas (WBAs/A)

The STINGER M934E6 Fuze is a complex electro-mechanical assembly integrating hermetically sealed hybrid microelectronics, advanced inertial and centrifugal components and electro-explosive devices into a single Fuze package.  The STINGER M934E6 Fuze must interface with the WBA which forms one of the main structural supports to the missile airframe and consists of a machined Titanium body configured with a Hard Target Sensor (HTS), Radio-Frequency Interference (RFI) Filter and an electrical cable assembly that interfaces between the Fuze/warhead and missile sections.  The WBA, for the M258E6 Warhead section, is a titanium body cylinder that houses the STINGER M934E6 Fuze and other components (not covered in this contract action) that make up the warhead section for the STINGER Missile. The STINGER M934E7 Fuze uses all the components and retains all the functional capabilities of the STINGER M934E6 Fuze, but incorporates a RADAR proximity sensor to provide a proximity detonation for the STINGER Missile. The STINGER M934E7 proximity Fuze and WBAs with Conformal Antenna are complex electro-mechanical assemblies integrated with a RADAR proximity sensor and conformal antenna into the existing legacy STINGER M934E6 Fuze and WBA configuration.  The WBA/A, for M258E7 Warhead section, has the same construction as the legacy variant, but is modified to incorporate a conformal wrap-around antenna for the proximity sensor utilized in the STINGER M934E7 Fuze. 

The aforementioned items will be procured using the following quantity ranges:

-STINGER M934E6 Fuzes (known as a legacy configuration): 250-499; 500-999; 1000-2500

-STINGER M934E7 Fuzes (known as a proximity configuration): 250-499; 500-999; 1000-2500

-Warhead Body Assemblies (WBAs): 250-499; 500-999; 1000-2500

-Warhead Body Assemblies with Antennas (WBAs/A): 250-499; 500-999; 1000-2500

The manufacture, inspection, testing and delivery of the above items shall be in accordance with the Technical Data Package (TDP), which is proprietary to the United States Government.

The Government intends to fulfill this requirement via a Sole Source, Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract with Lockheed Martin Sippican, Inc. (LMS), Marion, MA 02738, pursuant to Title 10 United States Code (U.S.C.) Section 2304(c)(1) as implemented by Federal Acquisition Regulation (FAR) Part 6.302-1(a)(2)(ii)(B) -- Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. 

The Contractor shall be responsible for providing all materials, equipment, hard tooling, personnel, and facilities necessary to manufacture, produce, and deliver the types and quantities of deliverables specified by the contract.  The STINGER M934E6 Fuzes, STINGER M934E7 Fuzes, WBAs, and WBAs/A shall be manufactured and tested in accordance with their respective TDPs, Production Specification, and other associated drawings and associated lists.  The North American Industry Classification (NAICS) Code for this procurement is 332993, Ammunition (Except Small Arms) Manufacturing.

The period of performance for this requirement will be four (4) twelve (12) month ordering periods.

THIS NOTICE DOES NOT CONSTITUE A REQUEST FOR PROPOSAL (RFP)/solicitation.  Responses to this announcement are not proposals and cannot be accepted by the Government to form a binding contract.  This is not a guarantee of a future RFP/solicitation or an award.  This notice should not be construed as a commitment of any kind by the U.S. Government. 

It is anticipated that a solicitation will be issued on or about fifteen (15) calendar days from the date of this announcement. Proposals will be required within thirty (30) calendar days from issuance of the solicitation. 

The Point of Contact for this action is Ms. Evangelina C. Tillyros, Contracting Officer, ACC-NJ-MC, Maneuver Ammunition Close Combat Center, Building 10, Phipps Rd. Picatinny Arsenal, NJ 07806-5000. evangelina.c.tillyros.civ@mail.mil.  Phone inquiries will not be accepted.