Electro-Optical/Infrared Tactical Decision Aid
Open Pre-Solicitation Posted
- Solicitation number
- DON27BZ02-NV013
- Agency
-
Office of Naval Research
Secretary of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Joshua Cossuth joshua.h.cossuth.civ@us.navy.mil
- Christopher Dunay christopher.j.dunay.civ@us.navy.mil
- Katherine Mulreany katherine.l.mulreany.civ@us.navy.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Department of the Navy's Office of Naval Research anticipates soliciting a Phase I SBIR effort under DoD topic DON27BZ02-NV013 to develop an Electro-Optical/Infrared (EO/IR) Tactical Decision Aid, with a due date of January 6, 2027. The Set Aside line is Total Small Business, and the opportunity is marked ITAR-controlled with CMMC Level 2 (Self) required. The objective is a TDA that predicts sensor performance for surface and air sensors in maritime, littoral, and inland environments across wavelengths from 0.4 to 12 micron. Forecasters would use meteorological conditions to compute metrics such as maximum detection range, so USN commanders can base tactical decisions on predicted sensor performance under ambient or forecast weather. Key modeling components are land/maritime surface background, target signature, radiative transfer, and sensor performance, which the source describes as interdependent and requiring feedback between them. The source also references Target Acquisition Weapons Software (TAWS), a successor to the Electro-Optic Tactical Decision Aid (EOTDA) that the Air Force Research Laboratory originally developed and released in 1998. Focus areas are Advanced Computing and Software, Human-Machine Interfaces, and Integrated Sensing and Cyber. The notice carries NAICS 541715 and PSC AC12.
Notice text
DoD SBIR topic DON27BZ02-NV013
Component: NAVY
Command: ONR
Phase: SBIR Program Phase I Action
Technology Areas: None
Focus Areas: Advanced Computing and Software; Human-Machine Interfaces; Integrated Sensing and Cyber
Keywords: Electro-Optical; Infrared; Modeling; Simulation; Propagation; Sensor; Target; Weather; Verification; Validation
ITAR: Yes
CMMC: Level 2 (Self)
Objective:
Develop an Electro-Optical/Infrared (EO/IR) Tactical Decision Aid (TDA) for surface and air sensors in maritime, littoral, and inland environments.
Description:
The United States Navy (USN) requires the capability to rapidly predict the performance of sensors that depend on the propagation of electro-optical/infrared (EO/IR) radiation (i.e., wavelengths from 0.4 to 12 micron) in air. Sensor performance is subject to environmental/meteorologic conditions, as well as sensor, platform, background/clutter, and target characteristics. For a given sensor on a platform and a target in background/clutter, a forecaster should be able to determine key performance metrics; for example, maximum detection range based on the forecasted meteorological conditions. In this way, USN commanders can make tactical decisions based on the predicted sensor performance given ambient/forecast weather conditions. Key modeling components within a TDA include the land/maritime surface background, target signature, radiative transfer, and sensor performance models. These models are often interdependent, requiring feedback between them (e.g., radiative transfer between target and background models is needed to compute the contrast of the target in the background, which then feeds into a sensor performance model).
Target Acquisition Weapons Software (TAWS), a successor to Electro-Optic Tactical Decision Aid (EOTDA), was originally developed by the Air Force Research Laboratory (AFRL) and released in 1998. Later a target scene model improvement for selected high-resolution targets was implemented with Multi-Service Electro-optics Signature (MuSES). The USN is looking for an innovative and accurate EO/IR TDA, which would be an alternative/improvement to TAWS. Improvements could include support for three dimensional meteorological inputs. The primary challenge for implementing an EO/IR TDA is the methodical verification and validation (V&V) of the constituent models and submodels being developed. This SBIR topic seeks innovative solutions to the development of an EO/IR TDA with particular focus on the methods proposed to verify and validate developed models. A list of prior V&V efforts on proposed submodels should be made clear in the responses to this solicitation, as well as the proposed means/methods to conduct V&V under a Phase II and/or Phase III.
Work produced in Phase II may become classified. Note: The prospective contractor(s) must be U.S. owned and operated with no foreign influence as defined by 32 U.S.C. § 2004.20 et seq., National Industrial Security Program Executive Agent and Operating Manual, unless acceptable mitigating procedures can and have been implemented and approved by the Defense Counterintelligence and Security Agency (DCSA) formerly Defense Security Service (DSS). The selected contractor and/or subcontractor must be able to acquire and maintain a secret level facility and Personnel Security Clearances. This will allow contractor personnel to perform on advanced phases of this project as set forth by DCSA and ONR in order to gain access to classified information pertaining to the national defense of the United States and its allies; this will be an inherent requirement. The selected company will be required to safeguard classified material during the advanced phases of this contract IAW the National Industrial Security Program Operating Manual (NISPOM), which can be found at Title 32, Part 2004.20 of the Code of Federal Regulations.
Phase I:
Develop a concept for an EO/IR TDA model architecture and verify the radiative transfer model can solve basic thermal transport problems (e.g., conduction, convection, radiation) with analytic solutions. Ensure facets/grid points can be individually sampled to provide their temperature and spectral radiance. Create a land/sea background model where spatiotemporally varying clutter can be added in Phase II. Create a CUBI thermal target model and a generic, band-selectable imaging sensor (e.g., 3-5 micron midwave IR (MWIR) imager) model.
Phase II:
Implement the EO/IR TDA model into a working prototype and ensure support for a wide range of generic representative targets (e.g., car, truck, ship, boat, plane, unmanned aerial system (UAS)) and a wide range of generic representative sensors (e.g., 0.4-0.7 micron visual band imager, 1.06 micron laser designator, 0.9-1.7 micron shortwave IR (SWIR) imager, 3-5 micron MWIR imager, 8-12 micron longwave IR (LWIR) imager). Develop and add specific target and sensor models, some of which will be provided by the government and might be classified. Add representative spatiotemporally varying clutter in the scene and validate the background/clutter model against prior field data collections. Validate the radiative transfer model with a complex thermal transport experiment using a CUBI target in the laboratory. Prepare a Phase III commercialization/transition plan.
Work in Phase II may become classified. Please see note in the Description.
Phase III:
Develop and add other specific target and sensor models, some of which will be provided by the government and might be classified. Validate the EO/IR TDA using previously collected field data. Design and execute an experimental validation of the EO/IR TDA using state-of-the art meteorological sensors and scientific grade (or better) thermal imagers, as well as a representative target and sensor to test the capability to determine sensor performance (e.g., maximum detection range).
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Innovative Shortwave Infrared High Energy Laser Source and Coupled Imager | Office of Naval Research | Total Small Business | |
| Distributed Multispectral Event-Driven Integrated Sensing and Communications | Department of the Navy | Total Small Business | |
| Rapid Imagery Creation for Navy Training | Office of Naval Research | Total Small Business | |
| Low-cost Mid-wave Infrared Focal-Plane Array (FPA) Fabrication through Direct-bond Interconnection | Office of Naval Research | Total Small Business | |
| Co-Packaged Optics (CPO) for Advanced Cryocooled Electro-Optical/Infrared (EO/IR) Sensors | Office of Naval Research | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity