Sole Source Voltage Regulator Test Option for our existing TESEC Model 881-TT Semiconductor Test System

This is a description of the DLA Product Test Center Division, Electrical Lab, VTA, requirements for the procurement of Voltage Regulator Test Option for our existing TESEC Model 881-TT Semiconductor Test System. It is the intent here to clearly define all required performance characteristics. In generating this statement, our objective is to end up with the necessary hardware, software and accessories needed to perform automated electrical inspections on voltage regulators using our existing TESEC Model 881-TT Semiconductor Test System. Because we want to maximize the ease of use some of the required features listed below will be specific. Our general objective is to minimize any impact to the DLA Product Test Center Division, Electrical Lab, VTA, operations and our customers as a result of this procurement, especially with regards to test cycle time. This upgrade will decrease time required to perform electrical inspections on voltage regulators by adding an automated testing capability to our TESEC system.

Background
This machine upgrade would expand the EPTC’s voltage regulator testing capabilities, help improve testing turnaround time, and minimize adverse effects to voltage regulator testing services if the LTS-2020 should need serviced and/ or become non-operational. This upgrade will also simplify the automated program creation and add testing capabilities to a widely used piece of equipment.

Scope
Install new hardware components on our TESEC Model 881-TT Semiconductor Test System.
Update Software/ Firmware as required.
Perform onsite training for the Voltage Regulator Test Option.

Performance Requirements
TESEC, Inc. will: Provide the required hardware, cabling, software, initial installation and training on the Voltage Regulator Test Option for our existing TESEC Model 881-TT Semiconductor Test System.

Deliverables
One 56XX-HB Voltage Regulator Head Box (Mercury free replacement for Model 9824-HBF
One 9223-DS/X Manual Test Adapter for Voltage Regulator Devices
One PT9504-42 Low Voltage Generator3 PCB (Required for V-REG Option)
One PT9913 Station I/F PCB and cables
Software/ Firmware Updates
Onsite Installation and training

Place of Performance
DSCC Columbus
Building 11 Section 7
3990 East Broad Street Whitehall, OH 43213
Shipped receivable to Bldg. 17
Marked for Bldg. 11 section 7
Attn: Robert Retkofsky 614-692-2066
Work to be performed will take place at: Building 11

Travel (if applicable)
Contractor responsible for travel to Place of Performance listed above.