RF Frontend Design (RFE) on Gallium Nitride on Silicon (GaN-on-Si) Open Topic
Closed Solicitation Posted
- Solicitation number
- DMEA254-P001
- Agency
-
Defense Microelectronics Activity
Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Defense Microelectronics Activity is soliciting Phase I SBIR proposals under open topic DMEA254-P001 for RF frontend design on gallium nitride-on-silicon low-noise and power amplifiers, with proposals due May 13, 2026, a date that has passed as of November 17, 2026. The set-aside is Total Small Business, and each small business concern may submit one proposal per topic, with multiple submissions rendering all prior versions nonresponsive.
Submissions must go exclusively through the Defense SBIR/STTR Innovation Portal (DSIP). Phase I technical volumes are limited to 10 pages, and cost proposals must itemize special tooling, materials, direct labor, travel, subcontracts, and consultants. DMEA will conduct price analysis and reserves the right to negotiate costs and limit awards based on superior quality and funding availability. Proposers will learn Phase I selection status within 90 days of the closing date. DMEA does not provide Discretionary Technical and Business Assistance (TABA). The notice is marked ITAR: No, and the NAICS code is 541715, with PSC AC12.
The work requires design, development, and demonstration of low-noise amplifiers and power amplifiers in GlobalFoundries' commercially available 200-mm GaN-on-Si technology (130RFG1), targeting higher output power density, linearity, and efficiency. Phase I is a feasibility study that evaluates process models, design kits, and PA/LNA designs against state-of-the-art performance, including integration effects on noise, isolation, electromigration, and thermal behavior, and it ends with a report proposing packaging and characterization activities. The Government File summary lists Phase I awards at up to $100,000 over a maximum three-month period.
Only Phase I awardees may submit Phase II proposals, which the Government File summary caps at $1.34 million over a maximum 24 months. Phase II requires DMEA-accredited Trusted Supplier status at proposal submission or demonstrated prior successful RF market sales or licensing. It covers prototype LNA and PA fabrication and testing, delivery of samples and evaluation test boards, and design IP licensed at fees under $50,000 per instantiation. Phase II technical volumes are limited to 40 pages. The government supplies silicon space through GlobalFoundries 130RFG1 MPW/shuttle runs, up to 50 mm² tiles, as Government Furnished Equipment. Phase III addresses dual-use applications in radar, communications, sensors, and electronic warfare.
Notice text
DoD SBIR topic DMEA254-P001
Component: DMEA
Command: DMEA
Phase: SBIR Program Phase I Action
Technology Areas: Electronics; Materials
Focus Areas: Advanced Materials; Microelectronics
Keywords: Gallium Nitride; GaN; HEMT; GaN-on-Si; MMIC; monolithic microwave integrated circuit; low-noise amplifier; power amplifier; LNA; PA
ITAR: No
Objective:
The objective is to design, develop, and demonstrate a low-noise amplifier (LNA) and power amplifier (PA) in a commercially available state-of-the-art GlobalFoundries (GF) 200-mm Gallium Nitride on Silicon technology (130RFG1) to improve higher output power density, linearity, and efficiency in radio communications systems for potential military and commercial applications.
Description:
In radio communication system, the RFE of the transceiver typically handles the receive and transmit function portion, whereas the baseband signal processing is typically implemented with digital logic. The radio communication system sensitivity requirements and output power are primarily dependent on the performance of the frontend circuit blocks, specifically the low-noise amplifiers (LNAs) and power amplifiers (PAs). Most of the current radar and military communication systems utilize either Gallium Nitride (GaN) or other types of group III-V semiconductor technologies for the RF frontend (RFE) circuitry of the radio to achieve high output power and sensitivity performance [1] [2]. There are disparate GaN chips available in discrete form for PAs and LNAs from commercial vendors, however, there are currently no monolithic 200-mm GaN-on-Si technology solution for scaled integration [3] [4]. To address this gap, GlobalFoundries is developing a new innovative GaN-on-Si technology production capability with access to Multi-Project Wafer (MPW) prototyping run [5]. Additionally, GlobalFoundries partnered with Finwave semiconductor to provide disruptive RF performance solutions and accelerate product development for commercial mobile handset and currently there are no integrated scaled solution set for PAs and LNAs in the 200-mm GaN-on-Si technology space for dual use applications [6].
The advantages of GaN are the excellent physical properties such as higher electron mobility and current density compared to traditional silicon-based technology; and makes the device material an attractive solution for use in power amplifiers (PAs) designs to achieve high output handling capabilities [7]. Due to the wide bandgap property of Gallium Nitride, the material is fundamentally superior for use in RF systems and can achieved higher breakdown voltages, output power, and power efficiency. The power delivery and efficiency of Gallium Nitride (GaN) devices are unmatched compared to other similar technologies and has superior RF performance capabilities. The size, weight, area, and power (SWaP) can be further achieved by leveraging GaN-on-Si technology by integrating the front-end functions into radio communication systems to achieve higher output power density and efficiency [8]. Further, the GaN-on-Si technology can enable large-scaled integration and cost efficiency using silicon substrates providing competitive advantages and disruptive RF performance overmatch [9][10].
Phase I:
Demonstrate the feasibility of developing an integrated low-noise and power amplifier using a commercially available 200-mm GlobalFoundries GaN-on-Si technology. The feasibility study shall provide an evaluation and assessment on the process, models, components, and process design kit and present results, as well as comparing the PA and LNA designs to current state of the art performance. Additionally, the report shall fully describe the proposed following: design flow and approaches, architecture topologies and tradeoffs, matching networks, CAD (Computer-aided Design) tools, noise models, device characteristics, and benchmark simulations. The contractor shall investigate and provide an assessment on the integration impacts of the PA and LNA for noise, isolation, electromigration and thermal effects. For the PA, the contractor shall perform simulations to investigate power, thermal and electromigration effects to determine optimal achievable saturated output power. Further, the contractor shall also propose activities for packaging, testing and characterization of the LNA and PA for follow-on program phase development, along with potential commercialization and dual-use applications.
Phase II:
The contractor must be a DMEA accredited Trusted Supplier at time of proposal submission. Others may be evaluated based on a previous successful product sales or licensing in the RF market space. Based on the results of Phase I, the contractor shall use the learning to design, develop, and fabricate a functional LNA and PA on a GlobalFoundries 200-mm GaN-on-Si technology that perform to the specifications identified by DMEA choosing for dual use applications. The design of the LNA and PA shall conform to all of GlobalFoundries design and manufacturing rules and be limited to a specified die area that is subject to DMEA approval. The LNA and PA shall be simulated across process, supply, and temperature variations extended to military range. The fabricated designs shall be packaged, characterized, and tested to verify the measured versus simulation performance. The contractor shall deliver samples of the fully functional prototype of the Low-Noise Amplifier (LNA) and Power Amplifier (PA) along with the respective evaluation test-boards, and test methods and procedures to the USG (US Government). For testing and characterization of the fabricated power amplifier, the contractor shall investigate pulsed high-powered output, linearity, and load pull measurements and provide the test results in the final report.
The contractor shall deliver a detailed final report that documents the design process, flow, and toolset required to develop the microcircuit with all electrical characterization and test measurements. Additionally, the contractor shall deliver all the design collaterals and database, and technical data package (schematics, libraries, models, GDS files, simulation results, packaged, gerber files, BOM) to the USG. The final report shall contain sufficient technical detail and data such that an entity skilled in semiconductor design and manufacturing can repeat the presented results.
The contractor shall make available to the DIB (Defense Industrial Base) or other commercial partners access to the designed IP (Intellectual Property) with a licensing fee of under $50k per instantiation.
GFE (Government Furnished Equipment): TAPO will make available as GFE access to silicon space via a GlobalFoundries 130RFG1 MPW/Shuttle run up to a 50 mm2 tile, subject to availability. Schedule will be mutually determined by the contracting activity and the awardee.
Phase III:
There may be opportunities for the further development of this concept for use in both military and commercial activities. During a Phase III program, the contractor will further refine the designs and seek opportunities to integrate and apply the technology to specific military applications. Government applications include radar, communications, sensors, and electronic warfare. The contractor shall support the USG for test and validation and transitioning the technology for field use in a military communication system.
Files
| File | Type | Posted |
|---|---|---|
| DMEA254-P001.pdf | ||
| DMEA_SBIR_254_R12.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Low SWaP, 2-micron Fiber Amplifiers | Air Force Materiel Command | Total Small Business | |
| High Speed Low Size, Weight, and Power (SWaP) Radio Frequency (RF) Communications Systems for Space-to-Space and Space-to-Terrestrial Applications | Missile Defense Agency | Total Small Business | |
| Wide Pass Bandwidth, High Selectivity, Continuously Tunable Notch Filters | Air Force Materiel Command | Total Small Business | |
| DIRECT TO PHASE II: Ultra-Low Latency Technology for Radio Applications 5G | Department of the Navy | Total Small Business | |
| Quantum Sensing Analyzer | Air Force Materiel Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity