DMEA_SBIR_254_R12.pdf

PDF 173 KB Posted

Attached to
RF Frontend Design (RFE) on Gallium Nitride on Silicon (GaN-on-Si) Open Topic
Solicitation number
DMEA254-P001
Issued by

About this file

This is a Broad Agency Announcement (BAA) document containing proposal submission instructions for the Defense Microelectronics Activity (DMEA) Small Business Innovation Research (SBIR) Program, Release 12.

The solicitation is an open topic BAA accepting Phase I proposals for small business concerns to develop innovative microelectronics solutions aligned with Department of Defense critical technology areas. The single open topic (DMEA254-P001) focuses on RF Frontend Design on Gallium Nitride on Silicon (GaN-on-Si) technology, requiring contractors to design and develop low-noise amplifiers and power amplifiers using GlobalFoundries' 200-mm GaN-on-Si technology platform. Phase I proposals must not exceed $100,000 with a maximum three-month performance period. Phase II awards are limited to $1,340,000 with a maximum 24-month performance period. All proposals must be submitted exclusively through the Defense SBIR/STTR Innovation Portal (DSIP) at https://www.dodsbirsttr.mil/submissions/. Phase I technical volumes are limited to 10 pages, and Phase II technical volumes to 40 pages. Cost proposals must include itemized details covering special tooling, materials, direct labor, travel, subcontracts, and consultants. The document specifies that DMEA will conduct price analysis and reserves the right to negotiate costs and limit awards based on superior quality and funding availability. Proposers will be notified of Phase I selection status within 90 days of the BAA closing date. Only one proposal per small business concern per topic is permitted; multiple submissions will result in all prior versions being marked nonresponsive. Phase II proposals may only be submitted by Phase I awardees and require DMEA accredited Trusted Supplier status or demonstrated prior successful product sales in the RF market. DMEA does not provide Discretionary Technical and Business Assistance (TABA).

View the file

Other files

File Type Posted
DMEA254-P001.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DMEA - 1

Defense Microelectronics Activity (DMEA)

25.4 Small Business Innovation Research (SBIR) Open Topic

Release 12

Proposal Submission Instructions

INTRODUCTION

The Defense Microelectronics Activity (DMEA) SBIR/STTR Program is implemented, administrated, and managed by the DMEA Office of Small Business Programs (OSBP). Proposers responding to a topic in this Broad Agency Announcement (BAA) must follow all general instructions provided in the

Department of Defense (DoD) SBIR 25.4 Annual Program BAA (Release 12). DMEA requirements in addition to or deviating from the DoD STTR 25.4 Annual Program BAA are provided in the instructions below. Proposers responding to a topic in this BAA must follow all general instructions provided in the

Department of Defense (DoD) SBIR Program BAA. DMEA requirements in addition to or deviating from the DoD Program BAA are provided in the instructions below.

Proposers are encouraged to thoroughly review the DoD Program BAA and register for the DSIP

Listserv to remain apprised of important programmatic and contractual changes.

• The full DoD Program BAA is available on DSIP at https://www.dodsbirsttr.mil/submissions/solicitation-documents/active-solicitations. Be sure to select the tab for the appropriate BAA cycle.

• Register for the DSIP Listserv at: https://www.dodsbirsttr.mil/submissions/login.

Specific questions pertaining to the administration of the DMEA SBIR/STTR Program and these proposal preparation instructions should be directed to: DMEA SBIR/STTR Program Manager, Mr. Tien Dang, at osd.mcclellan-park.dmea.list.sbir.sttr1@mail.mil.

This release contains an open topic. As outlined in section 7 of the SBIR and STTR Extension Act of

2022, innovation open topic activities—

(A) Increase the transition of commercial technology to the Department of Defense;

(B) Expand the small business nontraditional industrial base;

(C) Increase commercialization derived from investments of the Department of Defense; and

(D) Expand the ability for qualifying small business concerns to propose technology solutions to meet the needs of the Department of Defense.

Unlike conventional topics, which specify the desired technical objective and output, open topics can use generalized mission requirements or specific technology areas to adapt commercial products or solutions to close capability gaps, improve performance, or provide technological advancements in existing capabilities.

A small business concern may only submit one (1) proposal to each open topic. If more than one proposal from a small business concern is received for a single open topic, only the most recent proposal to be certified and submitted prior to the submission deadline will receive an evaluation. All prior proposals submitted by the small business concern for the same open topic will be marked as nonresponsive and will not receive an evaluation.

PHASE I PROPOSAL GUIDELINES

The Defense SBIR/STTR Innovation Portal (DSIP) is the official portal for DoD SBIR/STTR proposal submission. Proposers are required to submit proposals via DSIP; proposals submitted by any other means will be disregarded. Detailed instructions regarding registration and proposal submission via DSIP are provided in the DoD Program BAA.

https://www.dodsbirsttr.mil/submissions/solicitation-documents/active-solicitations https://www.dodsbirsttr.mil/submissions/login

DMEA - 2

DMEA intends for Phase I to be only an examination of the merit of the concept or technology that still involves technical risk, with a cost not exceeding $ 100,000.00. The technical period of performance for the Phase I effort shall be no more than three (3) months.

A list of the topics currently eligible for proposal submission is included in this section followed by full topic descriptions. These are the only topics for which proposals will be accepted at this time. The topics are directly linked to DMEA’s core research and development requirements.

Please ensure that your e-mail address listed in your proposal is current and accurate. DMEA cannot be responsible for notification to companies that change their mailing address, e-mail address, or company official after proposal submission.

Proposal Coversheet (Volume 1)

The proposal coversheet is prepared on DSIP and in accordance with the DoD Program BAA.

Technical Volume (Volume 2)

The technical volume is not to exceed 10 pages and must follow the formatting requirements provided in the DoD SBIR Program BAA. Technical volumes exceeding 10 pages will be deemed non-compliant and will not be evaluated.

Content of the Technical Volume

Read the DoD SBIR Program BAA for detailed instructions on proposal format and program requirements. When you prepare your proposal submission, keep in mind that Phase I should address the feasibility of a solution to the topic. Only UNCLASSIFIED proposals will be accepted.

DMEA will evaluate and select Phase I proposals using the evaluation criteria contained in the DoD SBIR Program BAA. Due to limited funding, DMEA reserves the right to limit awards under any topic, and only proposals considered to be of superior quality will be funded.

Cost Volume (Volume 3)

The Phase I Base amount must not exceed $100,000.00. DMEA will conduct a price analysis to determine whether cost proposals, including quantities and prices, are fair and reasonable.

Contractors should expect that cost proposals will be negotiated. Costs must be separated and clearly identified on the Proposal Cover Sheet (Volume 1) and in Volume 3.

The on-line cost volume for Phase I proposal submissions must be at a level of detail that would enable DMEA personnel to determine the purpose, necessity, and reasonability of each cost element. Provide sufficient information (a. through h. below) on how funds will be used if the contract is awarded. Include the itemized cost volume information (a. through h. below) as an appendix in your technical proposal. The itemized cost volume information (a. through h. below) will not count against the 10-page limit on Phase I proposal submissions.

a. Special Tooling and Test Equipment and Material: The inclusion of equipment and materials will be carefully reviewed relative to need and appropriateness of the work proposed. The purchase of special tooling and test equipment must, in the opinion of the Contracting Officer, be advantageous to the Government and relate directly to the specific effort. They may include such items as innovative instrumentation and/or automatic test equipment. Title to property furnished by the Government or acquired with Government funds will be vested with the DoD Component;

DMEA - 3

unless it is determined that transfer of the title to the contractor would be more cost effective than recovery of the equipment by the DoD Component.

b. Direct Cost Materials: Justify costs for materials, parts, and supplies with an itemized list containing types, quantities, price, and where appropriate, purposes.

c. Other Direct Costs: This category of costs includes specialized services such as machining or milling, special testing or analysis, costs incurred in obtaining temporary use of specialized equipment. Proposals, which include teased hardware, must provide an adequate lease versus purchase justification or rationale.

d. Direct Labor: Identify key personnel by name if possible or by labor category if specific names are not available. The number of hours, labor overhead and/or fringe benefits and actual hourly rates for each individual are also necessary.

e. Travel: Travel costs must relate to the needs of the project. Break out travel cost by trip, with the number of travelers, airfare, and per diem. Indicate the destination, duration, and purpose of each trip.

f. Cost Sharing: Cost sharing is permitted. However, cost sharing is not required, nor will it be an evaluation factor in the consideration of a proposal.

g. Subcontracts: Involvement of university or other consultants in the planning and /or research stages of the project may be appropriate. If the offeror intends such involvement, describe the involvement in detail and include information in the cost proposal. The proposed total of all consultant fees, facility leases, or usage fees and other subcontract or purchase agreements may not exceed one-third of the total contract price or cost, unless otherwise approved in writing by the Contracting Officer. Support subcontract costs with copies of the subcontract agreements. The supporting agreement documents must adequately describe the work to be performed (i.e., Cost

Volume). At the very least, a statement of work with a corresponding detailed cost volume for each planned subcontract must be provided.

h. Consultants: Provide a separate agreement letter for each consultant. The letter should briefly state what service or assistance will be provided, the number of hours required, and the hourly rate.

Please review the updated Percentage of Work (POW) calculation details included in the DoD

Program BAA. DMEA will not accept any deviation to the POW requirements.

Company Commercialization Report (CCR) (Volume 4)

Completion of the CCR as Volume 4 of the proposal submission in DSIP is required. Please refer to the DoD Program BAA for full details on this requirement. Information contained in the CCR will be considered by DMEA during proposal evaluations.

Supporting Documents (Volume 5)

All proposing small business concerns are REQUIRED to submit the “Contractor Certification

Regarding Provision of Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment” to Volume 5, Supporting Documents.

Please refer to the DoD Program BAA for more information.

DMEA - 4

Fraud, Waste and Abuse Training (Volume 6)

Fraud, Waste and Abuse training material can be found in the Volume 6 section of the proposal submission module in DSIP and must be thoroughly reviewed once per year to proceed with proposal submission.

Disclosures of Foreign Affiliations or Relationships to Foreign Countries (Volume 7)

Small business concerns must complete the Disclosures of Foreign Affiliations or Relationships to Foreign Countries webform in Volume 7 of the DSIP proposal submission. Please be aware that the Disclosures of Foreign Affiliations or Relationships to Foreign Countries WILL NOT be accepted as a PDF Supporting Document in Volume 5 of the DSIP proposal submission. Do not upload any previous versions of this form to Volume 5. For additional details, please refer to the

DoD Program BAA.

PHASE II PROPOSAL GUIDELINES

Phase II proposals may only be submitted by Phase I awardees. Phase II is the prototype/demonstration of the technology that was found feasible in Phase I. DMEA encourages, but does not require, partnership and outside investment as part of discussions with DMEA sponsors for potential Phase II efforts.

The Technical Volume is not to exceed forty (40) pages and consists of a single PDF file with your firm name, topic number, and proposal number in the header of each page. All documentation should use no smaller than 10-point font on standard 8.5" X 11" paper with one-inch margins and not be in two-column format. Do not include blank pages.

Phase II proposals may be submitted for an amount not to exceed $1,340,000.00. The technical period of performance for the Phase II effort shall be no more than twenty-four (24) months.

Phase I awardees may submit a Phase II proposal without invitation not later than sixty (60) calendar days following the end of the Phase I contract. The Phase II proposal submission instructions are identified in the Phase I contract, Part I – The Schedule, Section H, Special Contract Requirements, “SBIR Phase II

Proposal Submission Instructions”.

All Phase II proposals must have a complete electronic submission per the Proposal Volumes area listed in Phase I. Your proposal must be submitted via the submission site on or before the DMEA-specified deadline or it will not be considered for award.

Due to limited funding, DMEA’s ability to award any Phase II, regardless of proposal quality or merit, is subject to availability of funds. Please ensure that your proposal is valid for 180 days after submission

Any extension to that time period will be requested by the Contracting Officer.

A Phase II contractor may receive up to one additional, Sequential Phase II award for continued work on a project. The additional, Sequential Phase II award has the same guideline amounts and limits as an initial Phase II award. Sequential, Phase II proposals shall be initiated by the Government Technical Point of Contact for the initial Phase II effort and must be approved by the DMEA SBIR/STTR Program

Manager in advance.

DISCRETIONARY TECHNICAL AND BUSINESS ASSISTANCE (TABA)

DMEA does not provide Discretionary Technical and Business Assistance (TABA).

DMEA - 5

EVALUATION AND SELECTION

All proposals will be evaluated in accordance with the evaluation criteria listed in the DoD Program

BAA.

Proposing firms will be notified of selection or non-selection status for a Phase I award within 90 days of the closing date of the BAA

Refer to the DoD Program BAA for procedures to protest the Announcement.

As further prescribed in FAR 33.106(b), FAR 52.233-3, Protests after Award should be submitted to:

DMEA SBIR/STTR Program Manager:

- Name: Mr. Tien Dang

- Email: osd.mcclellan-park.dmea.list.sbir-sttr1@mail.mil

DMEA - 6

DMEA SBIR 25.4 Topic Index

Release 12

DMEA254-P001 RF Frontend Design (RFE) on Gallium Nitride on Silicon (GaN-on-Si) Open

Topic

DMEA - 7

DMEA254-P001 TITLE: RF Frontend Design (RFE) on Gallium Nitride on Silicon (GaN-on-Si) Open

Topic

OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Microelectronics, Advance Materials

OBJECTIVE: The objective is to design, develop, and demonstrate a low-noise amplifier (LNA) and power amplifier (PA) in a commercially available state-of-the-art GlobalFoundries (GF) 200-mm Gallium

Nitride on Silicon technology (130RFG1) to improve higher output power density, linearity, and efficiency in radio communications systems for potential military and commercial applications.

DESCRIPTION: In radio communication system, the RFE of the transceiver typically handles the receive and transmit function portion, whereas the baseband signal processing is typically implemented with digital logic. The radio communication system sensitivity requirements and output power are primarily dependent on the performance of the frontend circuit blocks, specifically the low-noise amplifiers (LNAs) and power amplifiers (PAs). Most of the current radar and military communication systems utilize either

Gallium Nitride (GaN) or other types of group III-V semiconductor technologies for the RF frontend

(RFE) circuitry of the radio to achieve high output power and sensitivity performance [1] [2]. There are disparate GaN chips available in discrete form for PAs and LNAs from commercial vendors, however, there are currently no monolithic 200-mm GaN-on-Si technology solution for scaled integration [3] [4].

To address this gap, GlobalFoundries is developing a new innovative GaN-on-Si technology production capability with access to Multi-Project Wafer (MPW) prototyping run [5]. Additionally, GlobalFoundries partnered with Finwave semiconductor to provide disruptive RF performance solutions and accelerate product development for commercial mobile handset and currently there are no integrated scaled solution set for PAs and LNAs in the 200-mm GaN-on-Si technology space for dual use applications [6].

The advantages of GaN are the excellent physical properties such as higher electron mobility and current density compared to traditional silicon-based technology; and makes the device material an attractive solution for use in power amplifiers (PAs) designs to achieve high output handling capabilities [7]. Due to the wide bandgap property of Gallium Nitride, the material is fundamentally superior for use in RF systems and can achieved higher breakdown voltages, output power, and power efficiency. The power delivery and efficiency of Gallium Nitride (GaN) devices are unmatched compared to other similar technologies and has superior RF performance capabilities. The size, weight, area, and power (SWaP) can be further achieved by leveraging GaN-on-Si technology by integrating the front-end functions into radio communication systems to achieve higher output power density and efficiency [8]. Further, the GaN-on-

Si technology can enable large-scaled integration and cost efficiency using silicon substrates providing competitive advantages and disruptive RF performance overmatch [9][10].

PHASE I: Demonstrate the feasibility of developing an integrated low-noise and power amplifier using a commercially available 200-mm GlobalFoundries GaN-on-Si technology. The feasibility study shall provide an evaluation and assessment on the process, models, components, and process design kit and present results, as well as comparing the PA and LNA designs to current state of the art performance.

Additionally, the report shall fully describe the proposed following: design flow and approaches, architecture topologies and tradeoffs, matching networks, CAD (Computer-aided Design) tools, noise models, device characteristics, and benchmark simulations. The contractor shall investigate and provide an assessment on the integration impacts of the PA and LNA for noise, isolation, electromigration and thermal effects. For the PA, the contractor shall perform simulations to investigate power, thermal and electromigration effects to determine optimal achievable saturated output power. Further, the contractor shall also propose activities for packaging, testing and characterization of the LNA and PA for follow-on program phase development, along with potential commercialization and dual-use applications.

PHASE II: The contractor must be a DMEA accredited Trusted Supplier at time of proposal submission.

Others may be evaluated based on a previous successful product sales or licensing in the RF market

DMEA - 8

space. Based on the results of Phase I, the contractor shall use the learning to design, develop, and fabricate a functional LNA and PA on a GlobalFoundries 200-mm GaN-on-Si technology that perform to the specifications identified by DMEA choosing for dual use applications. The design of the LNA and PA shall conform to all of GlobalFoundries design and manufacturing rules and be limited to a specified die area that is subject to DMEA approval. The LNA and PA shall be simulated across process, supply, and temperature variations extended to military range. The fabricated designs shall be packaged, characterized, and tested to verify the measured versus simulation performance. The contractor shall deliver samples of the fully functional prototype of the Low-Noise Amplifier (LNA) and Power Amplifier

(PA) along with the respective evaluation test-boards, and test methods and procedures to the USG (US

Government). For testing and characterization of the fabricated power amplifier, the contractor shall investigate pulsed high-powered output, linearity, and load pull measurements and provide the test results in the final report.

The contractor shall deliver a detailed final report that documents the design process, flow, and toolset required to develop the microcircuit with all electrical characterization and test measurements.

Additionally, the contractor shall deliver all the design collaterals and database, and technical data package (schematics, libraries, models, GDS files, simulation results, packaged, gerber files, BOM) to the

USG. The final report shall contain sufficient technical detail and data such that an entity skilled in semiconductor design and manufacturing can repeat the presented results.

The contractor shall make available to the DIB (Defense Industrial Base) or other commercial partners access to the designed IP (Intellectual Property) with a licensing fee of under $50k per instantiation.

GFE (Government Furnished Equipment): TAPO will make available as GFE access to silicon space via a

GlobalFoundries 130RFG1 MPW/Shuttle run up to a 50 mm2 tile, subject to availability. Schedule will be mutually determined by the contracting activity and the awardee.

PHASE III DUAL USE APPLICATIONS: There may be opportunities for the further development of this concept for use in both military and commercial activities. During a Phase III program, the contractor will further refine the designs and seek opportunities to integrate and apply the technology to specific military applications. Government applications include radar, communications, sensors, and electronic warfare. The contractor shall support the USG for test and validation and transitioning the technology for field use in a military communication system.

REFERENCES:

1. T. Garg and S. Kale, "Recent Developments, Reliability Issues, Challenges and Applications of

GaN HEMT Technology," in IEEE Electron Devices Reviews, vol. 1, pp. 16-30, October 2024.

2. David Brown et.al., “Millimeter Wave GaN MMIC Technologies for Next-gen Defense

Applications”, IEEE International Microwave Symposium, 2023

3. https://www.qorvo.com/products/p/CMD184

4. https://www.qorvo.com/products/p/TGA2227

5. https://gf.com/manufacturing-services/multi-project-wafer-program/

6. https://www.microwavejournal.com/articles/42554-finwave-semiconductor-and-globalfoundries-partner-on-rf-gan-on-si-technology-for-cellular-handset-applications

7. Matthias Rudolph, “GaN HEMTs for low-noise amplification – status and challenges,”

International Workshop on Integrated Nonlinear Microwave and Millimeter-Wave Circuits

(INMMIC), April 2017.

8. T. Boles, "GaN-on-silicon present challenges and future opportunities," 2017 12th European

Microwave Integrated Circuits Conference (EuMIC), Nuremberg, Germany, 2017, pp. 21-24.

9. Rongming Chu et al, “An Experimental Demonstration of GaN CMOS Technology”, IEEE

Electron Device Letters, Vol. 37, No. 3, March 2016.

10. Bertrand Parvais and Hao Yu, “GaN based Devices for Advanced RF Applications Puts

Technology Building Blocks in the Spotlight,” Imec, microwave journal, april 2023, DMEA - 9 www.microwavejournal.com/articles/print/39930-gan-based-devices-for-advanced-rf-applications-puts-technology-building-blocks-in-the-spotlight

KEYWORDS: Gallium Nitride, GaN, HEMT, GaN-on-Si, MMIC, monolithic microwave integrated circuit, low-noise amplifier, power amplifier, LNA, PA

File details come from the government source that posted it. Updated .