Request for Proposal - 20mm F-16 Ammunition Handling Set - NSN:1005-01-190-9802
Closed Solicitation Posted
- Solicitation number
- SPRWA1-26-R-0017
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332994 Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- PSC
- 1005 Guns, Through 30Mm
- Place of performance
- Warner Robins, Georgia 31093, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation seeks proposals for manufacture of the 20mm Transfer Unit Mechanical Housing (NSN 1005-01-190-9802, P/N 209F953), a gear-driven component for the M61A1 gun system in F-16 ammunition handling sets, with proposals due September 25 and questions due before that deadline. Amendment 01, effective August 24, establishes the procurement as an Indefinite Delivery/Indefinite Quantity (IDIQ) contract vehicle under FAR 16.504, with up to three contracts available for award.
Sourcing is restricted to approved sources only. Current qualified sources are General Dynamics-OTS (CAGE 05606), Thomas Instrument Inc. (CAGE 5H860), and Jemco Components & Fabrication Inc. (CAGE 72126). Alternate sources must qualify through source approval procedures administered by WR-ALC 409 SCMS/GUEA and must obtain cognizant Air Force engineering approval. The part requires engineering source approval to maintain quality standards; qualification waivers are available for sources with prior F-16 housing supply within the past 36 months with satisfactory performance. Qualification validity is seven years from last approval date.
Place of performance is Warner Robins, Georgia. The NAICS code is 332994 (Small Arms, Ordnance, and Ordnance Accessories Manufacturing); PSC is 1005 (Guns, Through 30mm). Work includes production across a 12-month basic period and four 12-month ordering periods at a rate of three units per month, with an estimated total of 574 units across all periods. First Article testing requires submission of two test units within 180 calendar days from contract date, with government test cost at $31,471.67; one unit will be destroyed during testing. First Article Test waivers are available for prior suppliers.
Contractor personnel must achieve Cybersecurity Maturity Model Certification Level 2 (active and verified in the Supplier Performance Risk System) before contract award, a pre-award requirement that cannot be waived, because the effort involves ITAR-controlled technical data and Controlled Unclassified Information. CMMC Level 2 flows down to all subcontractors processing CUI; subcontractors handling only Federal Classified Information require CMMC Level 1. Items require Item Unique Identification marking per MIL-STD-130 via laser etching. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129; wood packaging material must be debarked, heat-treated, and certified per ISPM No. 15. Contract incorporates Defense Priorities and Allocations System rating DO: A1. Deliverables include IUID Marking Plan (45 days), Qualification Test Plan & Procedures (45 days), IUID Validation Report (90 days after First Article Test submission), and Test/Inspection Report (45 days from test completion or 270 days after award, whichever is earlier). Primary contracting officer contact is Christine O. Smith, Christine.Smith.20@us.af.mil, (478) 926-9913.
Notice text
4 versions
Update #4 · Latest ·
24 AUG 2026 This notice is being updated to provide additional questions/answers as received by the USG and to issue the attached RFP Amendment 01.
Questions from Offerors:
1. Are CMMC requirements required of subcontractors? Per DFARS 252.204-7021(d)(1) (ii) prime contractors are to Consult 32 CFR 170.23 related to the flowdown of the CMMC requirements, and flow down the correct CMMC level to subcontracts and other contractual instruments
Per DFARS 252.204-7021(d)(4) Prime contractors are to Ensure all subcontractors and suppliers complete prior to subcontract award, and maintain on an annual basis, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required for the subcontract or other contractual instrument for each of the subcontractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the subcontract
Per CFR 107.23 Application to subcontractors (a) CMMC requirements apply to prime contractors and subcontractors throughout the supply chain at all tiers that will process, store, or transmit any FCI or CUI on contractor information systems in the performance of the DoD contract or subcontract. Prime contractors shall comply and shall require subcontractors to comply with and to flow down CMMC requirements, such that compliance will be required throughout the supply chain at all tiers with the applicable CMMC level and assessment type for each subcontract as follows:
(1) If a subcontractor will only process, store, or transmit FCI (and not CUI) in performance of the subcontract, then a CMMC Status of Level 1 (Self) is required for the subcontractor.
(2) If a subcontractor will process, store, or transmit CUI in performance of the subcontract, then a CMMC Status of Level 2 (Self) is the minimum requirement for the subcontractor.
(3) If a subcontractor will process, store, or transmit CUI in performance of the subcontract and the associated prime contract has a requirement for a CMMC Status of Level 2 (C3PAO), then the CMMC Status of Level 2 (C3PAO) is the minimum requirement for the subcontractor.
(4) If a subcontractor will process, store, or transmit CUI in performance of the subcontract and the associated prime contract has a requirement for the CMMC Status of Level 3 (DIBCAC), then the CMMC Status of Level 2 (C3PAO) is the minimum requirement for the subcontractor.
2. Can the Government First Article Test Requirements be waived? Yes. Information regarding First Article Test Requirements waivers are provided on Block 11 of the Form 260 attachment to the RFP. In accordance with Block 11, paragraph c., offerors who have previously furnished production quantities of the same or similar articles to the Air Force, provided articles thus furnished, have exhibited satisfactory performance in the opinion of the Air Force; provided not more than 36 months have elapsed since completion of the contract. Under conditions stated in paragraph c., the cognizant engineering activity will decide whether or not the item has exhibited satisfactory performance in service and prepare and retain supporting documentation to fully justify this decision. The following information must be provided for the previously supplied article: Procuring Office, Contract Number, Date of Contract, and Specification Number and Revision.
3. If the First Article Test requirements are waived, will the applicable CDRLs be removed? Yes. Any CDRL applicable to First Article requirements will be removed for offerors who qualify for GFAT waiver.
PREVIOUSLY PUBLISHED CLARIFICATIONS/QUESTIONS:
Below is the clarification regarding the Cybersecurity Maturity Model Certification (CMMC) requirements for the upcoming solicitation, based on current Department of Defense (DoD) acquisition regulations:
Required CMMC Level CMMC Level 2 is required because this effort involves ITAR-controlled technical data and Controlled Unclassified Information (CUI). Timing of Compliance-Pre-Award Requirement. While an active assessment is not required at the exact moment of the proposal submission, the selected awardee must have the required level active and verified in the Supplier Performance Risk System (SPRS) at the time of contract award. The Contracting Officer cannot legally execute the award without this active status. Subcontractor Flowdown - This pre-award certification requirement flows down to all subcontractors who will be handling CUI under this contract.
Below is a clarification regarding SAR Package Approvals:
20mm Mechanical Housing is classified as a Critical Application Item CAI, therefore, Source Approval Request SAR remains valid for 7 years from the date of the approval letter.
04 AUG 2026 UPDATE: For purposes of proposal submissions, the primary point of contact is PCO, Chrissie Smith, Christine.Smith.20@us.af.mil.
SUBJECT:
This is a Request for Proposal for the production of the 20MM Mechanical Housing NSN 1005-01-190-9802.
Item Description:
NSN: 1005-01-190-9802
P/N: 209F953
The Transfer Unit Mechanical Housing NSN 1005-01-190-9802, P/N 209F953 is the transfer unit attached to the M61A1 gun and is gear-driven by the gun. The transfer unit assembly is attached to the gun feeder. Its function is to transfer live rounds from feed chute to the feeder assembly, and to transfer empty cases from the unload drive assembly into conveyor elements in the return chute. Gear-driven sprocket assemblies and guides within the transfer unit maintain positive control of the rounds and conveyor elements passing through the transfer unit. The transfer unit removes rounds from the conveyor, places the rounds into the extractor lip of the gun breech bolts, receives expended cases and unfired rounds from the gun breech bolts, and places them in the conveyor.
Acquisition Strategy:
This item will have an Acquisition Method Code/Acquisition Method Suffix code of 2/C, in which it Suitable for competitive acquisition for the first time. This part requires engineering source approval by the design control activity in order to maintain the quality of part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.
Based on critical customer requirements, Defense Logistics Agency Weapons Support (DLA AW) seeks to award a indefinite delivery/indefinite quantity (IDIQ) contract utilizing the strategy listed in Paragraph 2.0 Acquisition Strategy, to satisfy current and future Transfer Unit Housing Assembly requirements, by providing a contract vehicle for production orders issued to mitigate supply chain risks. The proposed procurement will be issued to offerors among approved and/or pre-qualified sources with proposals offering the best value to the Government in accordance with the tradeoff award procedures in FAR Part 15. Pre-qualified, but unapproved, sources will be required to produce First Articles. The proposed procurement will result in the award of up to three (3) multiple award indefinite delivery/indefinite quantity (IDIQ) contracts to multiple sources with up to two awards set-aside to small businesses. Each contract will consist of five 12-month ordering periods.
The DLA/AWB Contracting Office intends to award a competitive contract to for the manufacture of the 20mm Transfer Unit Mechanical Housing in support of the F-16 Aircraft program. Any interested parties may identify their interest and capability to respond to the requirement no later than closing date 10 Aug 2026 by Todd.stimus@us.af.mil and Chrissie Smith at christine.smith.20@us.af.mil.
Below is the clarification regarding the Cybersecurity Maturity Model Certification (CMMC) requirements for the upcoming solicitation, based on current Department of Defense (DoD) acquisition regulations:
Requirement Area Compliance Details & Implications
Required CMMC Level
CMMC 2.0 Level 2 - (Advanced) is required because this effort involves ITAR-controlled technical data and Controlled Unclassified Information (CUI). Please note that CMMC 1.0 is obsolete.
Timing of Compliance - Pre-Award Requirement. While an active assessment is not required at the exact moment of the proposal submission, the selected awardee must have the required level active and verified in the Supplier Performance Risk System (SPRS) at the time of contract award. The Contracting Officer cannot legally execute the award without this active status.
Subcontractor Flowdown - This pre-award certification requirement flows down to all subcontractors who will be handling CUI under this contract.
Below is a clarifification regarding SAR Package Approvals:
20mm Mechanical Housing is classified as a Critical Application Item CAI, therefore, Source Approval Request SAR remains valid for 7 years from the date of the approval letter
2 July 26 Below is a clarification regarding DFAR 252.204-7025 (CMMC)
When DFAR 252.204-7025 (attached) is referenced in any Government Solicitation, should the "blanks" (within the DFAR) be filled in by the Government?
Answer - Yes, this information will be filled out by the Government
Update #3 ·
04 AUG 2026 UPDATE: For purposes of proposal submissions, the primary point of contact is PCO, Chrissie Smith, Christine.Smith.20@us.af.mil.
SUBJECT:
This is a Request for Proposal for the production of the 20MM Mechanical Housing NSN 1005-01-190-9802.
Item Description:
NSN: 1005-01-190-9802
P/N: 209F953
The Transfer Unit Mechanical Housing NSN 1005-01-190-9802, P/N 209F953 is the transfer unit attached to the M61A1 gun and is gear-driven by the gun. The transfer unit assembly is attached to the gun feeder. Its function is to transfer live rounds from feed chute to the feeder assembly, and to transfer empty cases from the unload drive assembly into conveyor elements in the return chute. Gear-driven sprocket assemblies and guides within the transfer unit maintain positive control of the rounds and conveyor elements passing through the transfer unit. The transfer unit removes rounds from the conveyor, places the rounds into the extractor lip of the gun breech bolts, receives expended cases and unfired rounds from the gun breech bolts, and places them in the conveyor.
Acquisition Strategy:
This item will have an Acquisition Method Code/Acquisition Method Suffix code of 2/C, in which it Suitable for competitive acquisition for the first time. This part requires engineering source approval by the design control activity in order to maintain the quality of part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.
Based on critical customer requirements, Defense Logistics Agency Weapons Support (DLA AW) seeks to award a indefinite delivery/indefinite quantity (IDIQ) contract utilizing the strategy listed in Paragraph 2.0 Acquisition Strategy, to satisfy current and future Transfer Unit Housing Assembly requirements, by providing a contract vehicle for production orders issued to mitigate supply chain risks. The proposed procurement will be issued to offerors among approved and/or pre-qualified sources with proposals offering the best value to the Government in accordance with the tradeoff award procedures in FAR Part 15. Pre-qualified, but unapproved, sources will be required to produce First Articles. The proposed procurement will result in the award of up to three (3) multiple award indefinite delivery/indefinite quantity (IDIQ) contracts to multiple sources with up to two awards set-aside to small businesses. Each contract will consist of five 12-month ordering periods.
The DLA/AWB Contracting Office intends to award a competitive contract to for the manufacture of the 20mm Transfer Unit Mechanical Housing in support of the F-16 Aircraft program. Any interested parties may identify their interest and capability to respond to the requirement no later than closing date 10 Aug 2026 by Todd.stimus@us.af.mil and Chrissie Smith at christine.smith.20@us.af.mil.
Below is the clarification regarding the Cybersecurity Maturity Model Certification (CMMC) requirements for the upcoming solicitation, based on current Department of Defense (DoD) acquisition regulations:
Requirement Area Compliance Details & Implications
Required CMMC Level
CMMC 2.0 Level 2 - (Advanced) is required because this effort involves ITAR-controlled technical data and Controlled Unclassified Information (CUI). Please note that CMMC 1.0 is obsolete.
Timing of Compliance - Pre-Award Requirement. While an active assessment is not required at the exact moment of the proposal submission, the selected awardee must have the required level active and verified in the Supplier Performance Risk System (SPRS) at the time of contract award. The Contracting Officer cannot legally execute the award without this active status.
Subcontractor Flowdown - This pre-award certification requirement flows down to all subcontractors who will be handling CUI under this contract.
Below is a clarifification regarding SAR Package Approvals:
20mm Mechanical Housing is classified as a Critical Application Item CAI, therefore, Source Approval Request SAR remains valid for 7 years from the date of the approval letter
2 July 26 Below is a clarification regarding DFAR 252.204-7025 (CMMC)
When DFAR 252.204-7025 (attached) is referenced in any Government Solicitation, should the "blanks" (within the DFAR) be filled in by the Government?
Answer - Yes, this information will be filled out by the Government
Update #2 ·
SUBJECT:
This is a Request for Proposal for the production of the 20MM Mechanical Housing NSN 1005-01-190-9802.
Item Description:
NSN: 1005-01-190-9802
P/N: 209F953
The Transfer Unit Mechanical Housing NSN 1005-01-190-9802, P/N 209F953 is the transfer unit attached to the M61A1 gun and is gear-driven by the gun. The transfer unit assembly is attached to the gun feeder. Its function is to transfer live rounds from feed chute to the feeder assembly, and to transfer empty cases from the unload drive assembly into conveyor elements in the return chute. Gear-driven sprocket assemblies and guides within the transfer unit maintain positive control of the rounds and conveyor elements passing through the transfer unit. The transfer unit removes rounds from the conveyor, places the rounds into the extractor lip of the gun breech bolts, receives expended cases and unfired rounds from the gun breech bolts, and places them in the conveyor.
Acquisition Strategy:
This item will have an Acquisition Method Code/Acquisition Method Suffix code of 2/C, in which it Suitable for competitive acquisition for the first time. This part requires engineering source approval by the design control activity in order to maintain the quality of part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.
Based on critical customer requirements, Defense Logistics Agency Weapons Support (DLA AW) seeks to award a indefinite delivery/indefinite quantity (IDIQ) contract utilizing the strategy listed in Paragraph 2.0 Acquisition Strategy, to satisfy current and future Transfer Unit Housing Assembly requirements, by providing a contract vehicle for production orders issued to mitigate supply chain risks. The proposed procurement will be issued to offerors among approved and/or pre-qualified sources with proposals offering the best value to the Government in accordance with the tradeoff award procedures in FAR Part 15. Pre-qualified, but unapproved, sources will be required to produce First Articles. The proposed procurement will result in the award of up to three (3) multiple award indefinite delivery/indefinite quantity (IDIQ) contracts to multiple sources with up to two awards set-aside to small businesses. Each contract will consist of five 12-month ordering periods.
The DLA/AWB Contracting Office intends to award a competitive contract to for the manufacture of the 20mm Transfer Unit Mechanical Housing in support of the F-16 Aircraft program. Any interested parties may identify their interest and capability to respond to the requirement no later than closing date 10 Aug 2026 by Todd.stimus@us.af.mil and Chrissie Smith at christine.smith.20@us.af.mil.
Below is the clarification regarding the Cybersecurity Maturity Model Certification (CMMC) requirements for the upcoming solicitation, based on current Department of Defense (DoD) acquisition regulations:
Requirement Area Compliance Details & Implications
Required CMMC Level
CMMC 2.0 Level 2 - (Advanced) is required because this effort involves ITAR-controlled technical data and Controlled Unclassified Information (CUI). Please note that CMMC 1.0 is obsolete.
Timing of Compliance - Pre-Award Requirement. While an active assessment is not required at the exact moment of the proposal submission, the selected awardee must have the required level active and verified in the Supplier Performance Risk System (SPRS) at the time of contract award. The Contracting Officer cannot legally execute the award without this active status.
Subcontractor Flowdown - This pre-award certification requirement flows down to all subcontractors who will be handling CUI under this contract.
Below is a clarifification regarding SAR Package Approvals:
20mm Mechanical Housing is classified as a Critical Application Item CAI, therefore, Source Approval Request SAR remains valid for 7 years from the date of the approval letter
2 July 26 Below is a clarification regarding DFAR 252.204-7025 (CMMC)
When DFAR 252.204-7025 (attached) is referenced in any Government Solicitation, should the "blanks" (within the DFAR) be filled in by the Government?
Answer - Yes, this information will be filled out by the Government
Update #1 ·
SUBJECT:
This is a Request for Proposal for the production of the 20MM Mechanical Housing NSN 1005-01-190-9802.
Item Description:
NSN: 1005-01-190-9802
P/N: 209F953
The Transfer Unit Mechanical Housing NSN 1005-01-190-9802, P/N 209F953 is the transfer unit attached to the M61A1 gun and is gear-driven by the gun. The transfer unit assembly is attached to the gun feeder. Its function is to transfer live rounds from feed chute to the feeder assembly, and to transfer empty cases from the unload drive assembly into conveyor elements in the return chute. Gear-driven sprocket assemblies and guides within the transfer unit maintain positive control of the rounds and conveyor elements passing through the transfer unit. The transfer unit removes rounds from the conveyor, places the rounds into the extractor lip of the gun breech bolts, receives expended cases and unfired rounds from the gun breech bolts, and places them in the conveyor.
Acquisition Strategy:
This item will have an Acquisition Method Code/Acquisition Method Suffix code of 2/C, in which it Suitable for competitive acquisition for the first time. This part requires engineering source approval by the design control activity in order to maintain the quality of part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.
Based on critical customer requirements, Defense Logistics Agency Weapons Support (DLA AW) seeks to award a indefinite delivery/indefinite quantity (IDIQ) contract utilizing the strategy listed in Paragraph 2.0 Acquisition Strategy, to satisfy current and future Transfer Unit Housing Assembly requirements, by providing a contract vehicle for production orders issued to mitigate supply chain risks. The proposed procurement will be issued to offerors among approved and/or pre-qualified sources with proposals offering the best value to the Government in accordance with the tradeoff award procedures in FAR Part 15. Pre-qualified, but unapproved, sources will be required to produce First Articles. The proposed procurement will result in the award of up to three (3) multiple award indefinite delivery/indefinite quantity (IDIQ) contracts to multiple sources with up to two awards set-aside to small businesses. Each contract will consist of five 12-month ordering periods.
The DLA/AWB Contracting Office intends to award a competitive contract to for the manufacture of the 20mm Transfer Unit Mechanical Housing in support of the F-16 Aircraft program. Any interested parties may identify their interest and capability to respond to the requirement no later than closing date 10 Aug 2026 by Todd.stimus@us.af.mil and Chrissie Smith at christine.smith.20@us.af.mil.
Below is the clarification regarding the Cybersecurity Maturity Model Certification (CMMC) requirements for the upcoming solicitation, based on current Department of Defense (DoD) acquisition regulations:
Requirement Area Compliance Details & Implications
Required CMMC Level
CMMC 2.0 Level 2 - (Advanced) is required because this effort involves ITAR-controlled technical data and Controlled Unclassified Information (CUI). Please note that CMMC 1.0 is obsolete.
Timing of Compliance - Pre-Award Requirement. While an active assessment is not required at the exact moment of the proposal submission, the selected awardee must have the required level active and verified in the Supplier Performance Risk System (SPRS) at the time of contract award. The Contracting Officer cannot legally execute the award without this active status.
Subcontractor Flowdown - This pre-award certification requirement flows down to all subcontractors who will be handling CUI under this contract.
Below is a clarifification regarding SAR Package Approvals:
20mm Mechanical Housing is classified as a Critical Application Item CAI, therefore, Source Approval Request SAR remains valid for 7 years from the date of the approval letter
Files
| File | Type | Posted |
|---|---|---|
| Questions from Offerors 20 AUG 2026.docx | DOCX document | |
| SPRWA126R0017-0001.pdf | ||
| 158.pdf | ||
| 1653.pdf | ||
| 209F953_CDRL_A001_IUID_Marking_Plan-9802.pdf | ||
| 209F953_CDRL_A002_IUID_9802.pdf | ||
| SPRWA1-26-R-0017.pdf | ||
| First Article Requirements (AFMC Form 260).pdf | ||
| 9802_IUID_Checklist_ver_6.pdf | ||
| Sections_L_M.docx | DOCX document | |
| Pricing_Matrix_.xlsx | XLSX spreadsheet | |
| 209F953_CDRL_A003_FA_Qualification_-9802.pdf | ||
| 20MM Handling Set NSN 1005-01-190-9802 PreQual Reqts.pdf | ||
| 209F953_CDRL_A004_FA_Qual_Test_Report-9802.pdf |
Show all 14
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| 20mm F-16 Ammunition Handling Set - NSN:1005-01-190-9802 | Pre-Solicitation | |
| 20mm F-16 Ammunition Handling Set - NSN:1005-01-190-9802 | Pre-Solicitation | |
| 20mm F-16 Ammunition Handling Set - NSN:1005-01-190-9802 | Pre-Solicitation | |
| Pre-Qualification for Requirements for 20mm F-16 Ammunition Handling Set - NSN:1005-01-190-9802 | Special Notice |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| F-16 Wheel Housing Section | Air Force Sustainment Center | Total Small Business | |
| Aircraft, fighting falcon F-16; housing, antifriction bearing | Aviation | Total Small Business | |
| Housing, Mechanical | Aviation | No set-aside | |
| Gearbox, Assembly, AI | Aviation | No set-aside | |
| Rotor assembly, M61A | Land and Maritime | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity