Preventive maintenance and repair, hangar 19 and 21, joint base pearl harbor-hickam, oahu, hawaii

Preventive Maintenance and Repair, Hangars 19 & 21, Joint Base Pearl Harbor-Hickam, Oahu, Hawaii .  The work includes, but is not limited to, performing maintenance, repair, alteration, demolition and minor construction for the following:

Hangar 19 Subsystems

-Rolling Steel Service Door

-Steel Sliding Hangar Doors

-Aircraft Fuel Tank Ventilation System

-Breathing Air and Facility Air Supply Systems

-Fall Protection Inspection

-Load Test Beam Inspection

Hangar 21 Subsystems

-Telescoping Mast Service Platform

-Air Supply, distribution, Ventilation and Exhaust System

-Filter Doors and Vertical Lift Fabric Doors

-Industrial Wastewater Pre-Treatment Components (herein specified)

-Breathing Air and Facility Air Supply Systems

All maintenance and repair shall be performed by personnel trained and certified by the Original Equipment Manufacturer (OEM). 

 - Personnel maintaining, repairing, inspecting, testing, operating, or rigging WHE shall be qualified per NAVFAC P-307.

 - Personnel working on systems, equipment or components containing chlorofluorocarbons (CFCs) and/or hydro-chlorofluorocarbons (HCFCs) must be certified under an Environmental Protection Agency (EPA) approved technical certification program per OPNAVINST 5090.1 Chapter 6

 - Personnel working with or on electrical or electronic equipment must be trained and certified per NAVFAC MO-200.

 - Personnel performing work on transformers must be knowledgeable of proper procedures for handling and disposing of insulating fluid containing polychlorinated biphenyls (PCBs)

 - Personnel performing work in HAZMAT/HAZWASTE must complete the HAZMAT/HAZWASTE handling course or have a minimum of one year of experience working with HAZMAT/HAZWASTE.

 - All maintenance trade personnel certifying or inspecting repair or maintenance work

that does not require an inspector certified by a governing directive shall be qualified

at the journeyman level.

 - The Contractor shall submit proof of all certification, training, and licensing requirements.

Recurring work includes, but is not limited to, maintaining, repairing, and altering installed equipment and systems to ensure they are fully functional and in normal working condition.  Non-recurring work includes, but is not limited to, Unit Priced Labor Work, and Parts, Material and Equipment.

Procurement Method: Contracting by Negotiation.  The NAICS Code for this procurement is 561210 and the annual size standard is $47,000,000.  The contract term will be a base period of 12 months plus four one-year option periods.  The total term of the contract, including all options, will not exceed 60 months.  The Government will not synopsize the options when exercised.  The minimum guarantee will be the Base Period Recurring work and the maximum value of the contract will be the total value of all the Contract Line Items in the Schedule.  

Awarded contract N6247823D2401 to AHTNA INFRASTRUCTURE & TECHNOLOGIES, LLC for 6189152.00 on 2023-03-30.