Precast Concrete Slabs, Cylinders, and Materials

Closed Solicitation Posted

Solicitation number
W912HZ26Q1017
Agency
Responses due
Set-aside
HUBZone

Opportunity facts

Place of performance
Fort Polk, Louisiana 71459, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Engineer Research and Development Center, part of the Department of the Army Corps of Engineers, seeks precast concrete slabs, cylinders, and aggregate materials for ballistic testing research, with quotes due May 15. This is a 100% HUBZone set-aside competitive procurement conducted as a simplified acquisition under FAR Part 12.

Place of performance is Fort Polk, Louisiana. The requirement consists of 100 precast concrete slabs measuring 4 feet by 4 feet with 6-inch thickness and non-conventional reinforcement details (zone of no steel); one ASTM C31 cylinder (4 by 8 inches, field cured) crated in a padded box; and two 5-gallon buckets of representative aggregate samples (fine and coarse). Concrete slabs must achieve a minimum 28-day compressive strength of 4,000 psi per ASTM 39, with strength reports electronically transmitted for verification. The contractor shall provide mix design documentation and certifications for steel and aggregates. Slab specifications include A615 Grade 60 rebar, ASTM C33 aggregate, 0.5-inch chamfer on all edges, minimum 1.5-inch clear cover, and lifting hardware (preferably Meadow Burke RL-24 Rapid Lift, 2-ton). Delivery to the ERDC Test Facility at Fort Polk must occur no later than 45 days after contract award; ERDC will provide heavy equipment for off-loading.

The estimated contract value is $66,900. NAICS code is 327331 (Concrete Block and Brick Manufacturing) with a 500-employee size standard; PSC is 5610 (Mineral Construction Materials, Bulk). Market research identified qualified HUBZone vendors including Tarpan Construction LLC, Justin J. Reeves LLC, and Gainey's Concrete Products. Quotations must be submitted through SAM.gov. Questions should be directed to David Ammermann (david.g.ammermann@usace.army.mil) or Jon-Vincent Holden (Jon-Vincent.S.Holden@usace.army.mil).

Notice text

 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued.

The solicitation is being issued as a Request for Quote (RFQ) with the intent to award as a simplified acquisition. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. This requirement is 100% Hubzone set aside and utilizes the North American Industry Classification System Code (NAICS) 327331 (Concrete Block and Brick Manufacturing) with a size standard of 500 employees. This procurement is being conducted in accordance with regulation at FAR 12, Acquisition of Commercial Products and Commercial Services.

Please see attached Description of Requirement (DOR).

Instructions to Offerors - Commercial Product and Commercial Services(Reference FAR 52.212-1)

(a) The Offeror is responsible for reading all information contained in this solicitation and all attachments, if any, posted with it. Offerors should check the www.SAM.gov website often for any information regarding this solicitation and/or amendments to this solicitation. For information concerning this solicitation, please email david.g.ammermann@usace.army.mil and Jon-Vincent.S.Holden@usace.army.mil

(b) Pursuant to FAR 52.204-7(b), System for Award Management, offerors must be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted, and shall continue to be registered until time of award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. If an offeror is not registered in SAM at the time of the offer, its offer will not be considered for award. You may register electronically at http://www.sam.gov.

(c) Submission of offers. Signed and dated offers are due 15 May 2026, not later than 1:00 PM CST and must be submitted via email to: david.g.ammermann@usace.army.mil and Jon-Vincent.S.Holden@usace.army.mil. Offers may be submitted in writing on letterhead stationery, or as otherwise specified in the solicitation. At a minimum, offers must include:

(1) The solicitation number W912HZ26Q1017;  

(2) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This includes providing the terms of any standard warranty and technical support. This may include product literature, or other documents, if necessary;

(3) Unit pricing and extended pricing for each item: State discount terms, if any;

(4) Cage code and/or UEI Number.

(d) Late submissions, modifications, revisions, and withdrawals of offers - (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the designated government emails by the date and time designated in the solicitation; (2) Any offer, modification, revision, or withdrawal of an offer received after the exact date and time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; however, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted; and (3) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers.

(e) Contract award. The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(f) Offers shall be made in accordance with the Description of Requirements (DOR) document provided in the solicitation.

(g) Oral communications ARE NOT acceptable in response to this notice.

(h) Technical Inquiries and Questions: All technical inquiries and questions relating to this solicitation are to be submitted via email to david.g.ammermann@usace.army.mil and Jon-Vincent.S.Holden@usace.army.mil. Offerors shall submit questions at least 2 days prior to the closing/response date of the solicitation in order to ensure adequate time is allotted to form an appropriate response and to amend the solicitation, if necessary. Offerors must review the specifications in their entirety and review the www.SAM.gov website for answers to questions prior to submission of an inquiry                 

FAR 52.212-2 - Evaluation --Commercial Product and Commercial Services:

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government.

The following factors shall be used to evaluate offers:

1) Lowest Price

2) Technically Capability

The Government will issue an award to the offeror whose quote is the Lowest Price that is determined to meet at least the minimum requirements to be determined Technically Capable.

(1) Technically Capable is defined as the documented capability to meet the minimum requirements of the project as specified in this solicitation and the attached specifications, including evidence of the offeror's capability to provide the items specified and the ability to meet or exceed the specified delivery schedule. It is imperative that the offeror submit sufficient documentation and information for the Government to determine technical capability and quoted price. Failure to submit sufficient information for the Government to determine technical capability and quoted price may be cause for rejection of your quote.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

The following FAR clauses and provisions may apply to this acquisition:

52.203-3 Gratuities

52.252-2 Clauses Incorporated by Reference

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards

52.240-91 (Security Prohibitions and Exclusions)

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

52.219-6 Notice of Total Small Business Set-Aside

52.219-28 Post Award Small Business Program Representation

52.222-3 Convict Labor

52.222-19 Child Labor Cooperation with Authorities and Remedies

52.222-50 Combating Trafficking in Persons

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-34 Payment by Electronic Funds Transfer – Other than System for Award Management

52.233- 3 Protest After Award

52.233-4 Applicable Law for Breach of Contract Claim

The following DFARS Clauses and Provisions may be applicable to this acquisition:

252.203-7000 Requirement Relating to Compensation of Former DoD officials

252.203-7002 Requirement to Inform Employees of Whistleblower Rights

252.203-7005 Representation Relating to Compensation of Former DoD officials

252.211-7003 Item Unique Identification and Valuation

252.204-7003 Control Of Government Personnel Work Product

252.232-7006, Wide Area WorkFlow Payment Instructions

252.232-7010 Levies on Contract Payments

252.243-7001 Pricing Of Contract Modifications

Files

Similar open opportunities

Opportunity Agency Set-aside Responses due
Request for Information for On-Site Fabrication and Assembly of a Three-Bay High-Performance Magazine (HPM) Structure Fort Polk, Louisiana 71459, United States · NAICS 238120 Engineer Research and Development Center No set-aside
Prefabrication Training Venues and Construction Supplies Brunswick, Georgia 31524, United States · NAICS 332510 Federal Law Enforcement Training Center Total Small Business
Bulk Foundry Sand Rock Island, Illinois 61299, United States · NAICS 327999 ACC Rock Island Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity