Oil Water Separators - FLVKS
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W91QF4-19-R-0023
- Agency
-
MICC Fort Eustis
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Woman-Owned Small Business
Opportunity facts
- NAICS code
- 562998 All Other Miscellaneous Waste Management Services
- Place of performance
- Fort Leavenworth KS 66023 USA
Notice details come from SAM.gov. Updated .
Notice text
7 versions
Update #7 · Latest ·
Revised Price Schedule - Attachment #1-QUOTE_SHEET-OWS_FLVKS-REV-2
Vendor Question(s) Received with Answer(s) -
1. Can you provide any photos of the grates? If not can you indicate the level of effort that will be required to remove the grates?
Answer: All except 1 are metal lids or grates that were lifted by hand. 3 were best done as 2-man lift. Two of these were (supposed to be) bolted down. One has a 4" concrete slab covering the vault. A forklift was used to lift it off during inspection.
2. Will additional machinery or equipment be required? If so, for what percentage of the total number of separator site?
Answer: Contractor will be provided Government support to remove the 4" Concrete Pad for Service where all other metal lids or grates will be the responsibility of the contractor to remove for services.
Update #6 ·
Revised Price Schedule - Attachment #1-QUOTE_SHEET-OWS_FLVKS-REV-2
Update #5 ·
Revised Price Schedule - Attachment #1-QUOTE_SHEET-OWS_FLVKS
Update #4 ·
Non-personal services Blanket Purchase Agreement to provide Oil/Water Separation service and maintenance. The Government will not exercise any supervision or control over the contract service providers. The Contractor shall perform to the standards specified in the attached Performance Work Statement (PWS). Contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary.
The Contractor shall compile, record and report historical data, prepare required reports, and submit all information as specified by the Deliverables presented in the contract. The Contractor shall ensure all work in support of mission requirements tendered to the Government for acceptance conform to the measurable performance standards of quality, timeliness, and quantity specified in the PWS of this contract. The Contractor shall remove all Floating Oils and Grease (FOG), particulates, and debris from the surface of the Oil/Water Separator (OWS), and also any floating oils, greases and debris within the suspension/blocking fluid, and all sediment debris located at the bottom of the suspension/blocking fluid (water) while leaving as much suspension/blocking fluid as needed, for the safe and proper operation of the GT&OWS device/container. See attached PWS for full description of the requirement.
Site visits were held on 12 June 2019 and 17 September 2019. Requests for additional site visits shall be submitted to the Contracting Officer not later than 7 May 2020.
Amendment forthcoming to revise price schedule.
Update #3 ·
Non-personal services Blanket Purchase Agreement to provide Oil/Water Separation service and maintenance. The Government will not exercise any supervision or control over the contract service providers. The Contractor shall perform to the standards specified in the attached Performance Work Statement (PWS). Contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary.
The Contractor shall compile, record and report historical data, prepare required reports, and submit all information as specified by the Deliverables presented in the contract. The Contractor shall ensure all work in support of mission requirements tendered to the Government for acceptance conform to the measurable performance standards of quality, timeliness, and quantity specified in the PWS of this contract. The Contractor shall remove all Floating Oils and Grease (FOG), particulates, and debris from the surface of the Oil/Water Separator (OWS), and also any floating oils, greases and debris within the suspension/blocking fluid, and all sediment debris located at the bottom of the suspension/blocking fluid (water) while leaving as much suspension/blocking fluid as needed, for the safe and proper operation of the GT&OWS device/container. See attached PWS for full description of the requirement.
Site visits were held on 12 June 2019 and 17 September 2019. No additional site visits will be scheduled.
Update #2 ·
Non-personal services Blanket Purchase Agreement to provide Oil/Water Separation service and maintenance. The Government will not exercise any supervision or control over the contract service providers. The Contractor shall perform to the standards specified in the attached Performance Work Statement (PWS). Contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary.
The Contractor shall compile, record and report historical data, prepare required reports, and submit all information as specified by the Deliverables presented in the contract. The Contractor shall ensure all work in support of mission requirements tendered to the Government for acceptance conform to the measurable performance standards of quality, timeliness, and quantity specified in the PWS of this contract. The Contractor shall remove all Floating Oils and Grease (FOG), particulates, and debris from the surface of the Oil/Water Separator (OWS), and also any floating oils, greases and debris within the suspension/blocking fluid, and all sediment debris located at the bottom of the suspension/blocking fluid (water) while leaving as much suspension/blocking fluid as needed, for the safe and proper operation of the GT&OWS device/container. See attached PWS for full description of the requirement.
A site visit will be held on Tuesday, 17 September 2019 at 1:00 PM Central time.
Access to Fort Leavenworth is restricted and requires planning to ensure arrival on time. Contractors need to process through the Visitor Center to obtain access to the installation. Please contact the below Point of Contact prior to the site visit to confirm attendance for the site visit:
Larissa Brown, Contract Specialist
913-684-1622
larissa.a.brown2.civ@mail.mil
After initial meeting at the MICC office, contractors will be guided to DPW facilities on Fort Leavenworth, KS 66027-2332. The facility manager will provide a walk-through of the site. All questions shall be sent via email to the Contract Specialist by Thursday, 19 September 2019 at 4:30 PM. All questions received will be answered and posted to FBO through an amendment to the Solicitation.
Update #1 ·
Non-personal services Blanket Purchase Agreement to provide Oil/Water Separation service and maintenance. The Government will not exercise any supervision or control over the contract service providers. The Contractor shall perform to the standards specified in the attached Performance Work Statement (PWS). Contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary.
The Contractor shall compile, record and report historical data, prepare required reports, and submit all information as specified by the Deliverables presented in the contract. The Contractor shall ensure all work in support of mission requirements tendered to the Government for acceptance conform to the measurable performance standards of quality, timeliness, and quantity specified in the PWS of this contract. The Contractor shall remove all Floating Oils and Grease (FOG), particulates, and debris from the surface of the Oil/Water Separator (OWS), and also any floating oils, greases and debris within the suspension/blocking fluid, and all sediment debris located at the bottom of the suspension/blocking fluid (water) while leaving as much suspension/blocking fluid as needed, for the safe and proper operation of the GT&OWS device/container. See attached PWS for full description of the requirement.
Files
Show all 13
Notice history
| Notice | Type | Posted |
|---|---|---|
| Oil Water Separators - FLVKS | Award Notice | |
| This notice | Solicitation |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity