NASA Stennis Space Center Miter Gate Rehabilitation Construction Contract

AMENDMENT 0002 24 JUNE 2021

Attached is a copy of the amendment 0002 of the solicitation. The solicitation was amended to upload the questions and responses to SAM.GOV.  The proposal due date has  been extended to 10:00 AM Central on Tuesday, 13 July 2021.

AMENDMENT 0001 16 JUNE 2021

Attached is a copy of the amendment 0001 of the solicitation. The solicitation was amended to upload the Pre-Bid Site Visit Sign-In Sheet, the mechanical drawings and reference drawings to SAM.GOV.

** 7 JUNE 2021 UPDATE INFORMATION

Attached is a copy of the FINAL solicitation.  The FINAL Plans and Specifications were uploaded with the previous update. 

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this FINAL solicitation for further details.”** 

UPDATE INFORMATION

Attached is a copy of the DRAFT solicitation and Plans and Specifications.  The FINAL solicitation will be forth coming.

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this DRAFT solicitation for further details.”

Project Description: The U.S. Army Corps of Engineers, St. Louis District, is seeking a firm for the rehabilitation of the miter gates at the National Aeronautics and Space Administration (NASA) John C. Stennis Space Center (SSC) Navigation Lock. The SSC is a rocket engine testing facility operated by NASA in Hancock County, Mississippi, on the banks of the Pearl River at the Mississippi–Louisiana border. The SSC is located at the southwest corner of Mississippi about 50 miles northeast of New Orleans, Louisiana, and 30 miles from the Mississippi Gulf Coast. In general, the goal of this construction project is to rehabilitate both the upper and lower miter gates, allowing the SSC to maintain marine access to the NASA test facility into the future.  This Navigation Lock rehabilitation is needed to meet the long-term mission of NASA at the SSC. A miter gate consists of a left and right-hand leaf that are opposite hand but otherwise identical. The Contractor shall remove and lay flat each miter gate leaf on a deck barge for rehabilitation. Government-furnished lock chamber stop-logs may need to be installed at the upper end of the lock, depending on the Contractor’s work plan. The miter gate rehabilitation consists of blasting and painting the gates, replacement of all timber fenders, replacement of miter gate rubber seals, and structural member replacement and repair. Rehabilitation also includes cathodic protection system removal, repair, installation, and testing by corrosion expert in accordance with specifications. All four gate leaf operating hydraulic cylinders shall be removed and shipped to a capable facility for rehabilitation. Work to be completed prior to miter gate removal includes the fabrication of one set of replacement anchor bars and pins for use at the lower left miter gate anchorage, fabrication of special “turning feet” to facilitate miter gate laydown, fabrication and installation of miter gate lifting and laydown lugs, and temporary alterations of the miter gate walkway and bulkhead plate at the top of the gates.  During the period the gates are removed, the Contractor’s certified diver shall conduct inspections of the miter gate sills, pintles, and contact blocks, with the inspection report furnished to the Government. After rehabilitation is complete, the Contractor shall upright and reinstall the miter gates, along with rehabilitated cylinders and replacement anchor bars at the lower left miter gate leaf. Testing will be required in accordance with specifications. Temporary alterations to the walkways and bulkhead plate shall be repaired as needed. The work covered by this contract will consist of furnishing all equipment, labor, services, supplies and materials necessary to satisfactorily rehabilitate the Navigation Lock at the NASA SSC as specified and in accordance with the contract specifications. Particular efforts will be required to minimize the duration of any lock closure.

Solicitation Number: W912P921R0036

Solicitation Type: Request for Proposal (RFP) – no public bid opening

Solicitation Competition: Unrestricted

NAICS Code: 237990 – Other Heavy and Civil Engineering Construction

Small business size standard is $39.5 million

Estimated Magnitude: between $5,000,000 and $10,000,000

The closing date and time for submission of offers will be contained in the solicitation package. The solicitation is expected to be issued on or about 21 May 2021. This solicitation package will be posted on the System for Award Management (BetaSAM), which can be accessed at www.beta.sam.gov.  The Government will not provide paper copies of the solicitation or the Interested Vendors List (IVL). Telephone, written, facsimile, or e-mail requests for the solicitation package or the IVL list will not be honored. Potential bidders MUST register at www.beta.sam.gov, in order to receive notification and/or changes to the solicitation.

Potential offerors are responsible for monitoring this site for the release of the solicitation package and any other pertinent information and for downloading their own copy of the solicitation package.

This notice does not obligate the Government to award a contract nor does it obligate the Government to pay for proposal preparation costs.

Be advised that all interested parties MUST be registered in the System for Award Management (SAM) Database, www.sam.gov in order to receive a contract award.

If you have any additional questions, please contact Angie Grimes at (314) 331-8965 or via email at angie.l.grimes@usace.army.mil.

AMENDMENT 0001 16 JUNE 2021

Attached is a copy of the amendment 0001 of the solicitation. The solicitation was amended to upload the Pre-Bid Site Visit Sign-In Sheet, the mechanical drawings and reference drawings to SAM.GOV.

** 7 JUNE 2021 UPDATE INFORMATION

Attached is a copy of the FINAL solicitation.  The FINAL Plans and Specifications were uploaded with the previous update. 

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this FINAL solicitation for further details.”** 

UPDATE INFORMATION

Attached is a copy of the DRAFT solicitation and Plans and Specifications.  The FINAL solicitation will be forth coming.

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this DRAFT solicitation for further details.”

Project Description: The U.S. Army Corps of Engineers, St. Louis District, is seeking a firm for the rehabilitation of the miter gates at the National Aeronautics and Space Administration (NASA) John C. Stennis Space Center (SSC) Navigation Lock. The SSC is a rocket engine testing facility operated by NASA in Hancock County, Mississippi, on the banks of the Pearl River at the Mississippi–Louisiana border. The SSC is located at the southwest corner of Mississippi about 50 miles northeast of New Orleans, Louisiana, and 30 miles from the Mississippi Gulf Coast. In general, the goal of this construction project is to rehabilitate both the upper and lower miter gates, allowing the SSC to maintain marine access to the NASA test facility into the future.  This Navigation Lock rehabilitation is needed to meet the long-term mission of NASA at the SSC. A miter gate consists of a left and right-hand leaf that are opposite hand but otherwise identical. The Contractor shall remove and lay flat each miter gate leaf on a deck barge for rehabilitation. Government-furnished lock chamber stop-logs may need to be installed at the upper end of the lock, depending on the Contractor’s work plan. The miter gate rehabilitation consists of blasting and painting the gates, replacement of all timber fenders, replacement of miter gate rubber seals, and structural member replacement and repair. Rehabilitation also includes cathodic protection system removal, repair, installation, and testing by corrosion expert in accordance with specifications. All four gate leaf operating hydraulic cylinders shall be removed and shipped to a capable facility for rehabilitation. Work to be completed prior to miter gate removal includes the fabrication of one set of replacement anchor bars and pins for use at the lower left miter gate anchorage, fabrication of special “turning feet” to facilitate miter gate laydown, fabrication and installation of miter gate lifting and laydown lugs, and temporary alterations of the miter gate walkway and bulkhead plate at the top of the gates.  During the period the gates are removed, the Contractor’s certified diver shall conduct inspections of the miter gate sills, pintles, and contact blocks, with the inspection report furnished to the Government. After rehabilitation is complete, the Contractor shall upright and reinstall the miter gates, along with rehabilitated cylinders and replacement anchor bars at the lower left miter gate leaf. Testing will be required in accordance with specifications. Temporary alterations to the walkways and bulkhead plate shall be repaired as needed. The work covered by this contract will consist of furnishing all equipment, labor, services, supplies and materials necessary to satisfactorily rehabilitate the Navigation Lock at the NASA SSC as specified and in accordance with the contract specifications. Particular efforts will be required to minimize the duration of any lock closure.

Solicitation Number: W912P921R0036

Solicitation Type: Request for Proposal (RFP) – no public bid opening

Solicitation Competition: Unrestricted

NAICS Code: 237990 – Other Heavy and Civil Engineering Construction

Small business size standard is $39.5 million

Estimated Magnitude: between $5,000,000 and $10,000,000

The closing date and time for submission of offers will be contained in the solicitation package. The solicitation is expected to be issued on or about 21 May 2021. This solicitation package will be posted on the System for Award Management (BetaSAM), which can be accessed at www.beta.sam.gov.  The Government will not provide paper copies of the solicitation or the Interested Vendors List (IVL). Telephone, written, facsimile, or e-mail requests for the solicitation package or the IVL list will not be honored. Potential bidders MUST register at www.beta.sam.gov, in order to receive notification and/or changes to the solicitation.

Potential offerors are responsible for monitoring this site for the release of the solicitation package and any other pertinent information and for downloading their own copy of the solicitation package.

This notice does not obligate the Government to award a contract nor does it obligate the Government to pay for proposal preparation costs.

Be advised that all interested parties MUST be registered in the System for Award Management (SAM) Database, www.sam.gov in order to receive a contract award.

If you have any additional questions, please contact Angie Grimes at (314) 331-8965 or via email at angie.l.grimes@usace.army.mil.

** 7 JUNE 2021 UPDATE INFORMATION

Attached is a copy of the FINAL solicitation.  The FINAL Plans and Specifications were uploaded with the previous update. 

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this FINAL solicitation for further details.”** 

UPDATE INFORMATION

Attached is a copy of the DRAFT solicitation and Plans and Specifications.  The FINAL solicitation will be forth coming.

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this DRAFT solicitation for further details.”

Project Description: The U.S. Army Corps of Engineers, St. Louis District, is seeking a firm for the rehabilitation of the miter gates at the National Aeronautics and Space Administration (NASA) John C. Stennis Space Center (SSC) Navigation Lock. The SSC is a rocket engine testing facility operated by NASA in Hancock County, Mississippi, on the banks of the Pearl River at the Mississippi–Louisiana border. The SSC is located at the southwest corner of Mississippi about 50 miles northeast of New Orleans, Louisiana, and 30 miles from the Mississippi Gulf Coast. In general, the goal of this construction project is to rehabilitate both the upper and lower miter gates, allowing the SSC to maintain marine access to the NASA test facility into the future.  This Navigation Lock rehabilitation is needed to meet the long-term mission of NASA at the SSC. A miter gate consists of a left and right-hand leaf that are opposite hand but otherwise identical. The Contractor shall remove and lay flat each miter gate leaf on a deck barge for rehabilitation. Government-furnished lock chamber stop-logs may need to be installed at the upper end of the lock, depending on the Contractor’s work plan. The miter gate rehabilitation consists of blasting and painting the gates, replacement of all timber fenders, replacement of miter gate rubber seals, and structural member replacement and repair. Rehabilitation also includes cathodic protection system removal, repair, installation, and testing by corrosion expert in accordance with specifications. All four gate leaf operating hydraulic cylinders shall be removed and shipped to a capable facility for rehabilitation. Work to be completed prior to miter gate removal includes the fabrication of one set of replacement anchor bars and pins for use at the lower left miter gate anchorage, fabrication of special “turning feet” to facilitate miter gate laydown, fabrication and installation of miter gate lifting and laydown lugs, and temporary alterations of the miter gate walkway and bulkhead plate at the top of the gates.  During the period the gates are removed, the Contractor’s certified diver shall conduct inspections of the miter gate sills, pintles, and contact blocks, with the inspection report furnished to the Government. After rehabilitation is complete, the Contractor shall upright and reinstall the miter gates, along with rehabilitated cylinders and replacement anchor bars at the lower left miter gate leaf. Testing will be required in accordance with specifications. Temporary alterations to the walkways and bulkhead plate shall be repaired as needed. The work covered by this contract will consist of furnishing all equipment, labor, services, supplies and materials necessary to satisfactorily rehabilitate the Navigation Lock at the NASA SSC as specified and in accordance with the contract specifications. Particular efforts will be required to minimize the duration of any lock closure.

Solicitation Number: W912P921R0036

Solicitation Type: Request for Proposal (RFP) – no public bid opening

Solicitation Competition: Unrestricted

NAICS Code: 237990 – Other Heavy and Civil Engineering Construction

Small business size standard is $39.5 million

Estimated Magnitude: between $5,000,000 and $10,000,000

The closing date and time for submission of offers will be contained in the solicitation package. The solicitation is expected to be issued on or about 21 May 2021. This solicitation package will be posted on the System for Award Management (BetaSAM), which can be accessed at www.beta.sam.gov.  The Government will not provide paper copies of the solicitation or the Interested Vendors List (IVL). Telephone, written, facsimile, or e-mail requests for the solicitation package or the IVL list will not be honored. Potential bidders MUST register at www.beta.sam.gov, in order to receive notification and/or changes to the solicitation.

Potential offerors are responsible for monitoring this site for the release of the solicitation package and any other pertinent information and for downloading their own copy of the solicitation package.

This notice does not obligate the Government to award a contract nor does it obligate the Government to pay for proposal preparation costs.

Be advised that all interested parties MUST be registered in the System for Award Management (SAM) Database, www.sam.gov in order to receive a contract award.

If you have any additional questions, please contact Angie Grimes at (314) 331-8965 or via email at angie.l.grimes@usace.army.mil.

UPDATE INFORMATION

Attached is a copy of the DRAFT solicitation and Plans and Specifications.  The FINAL solicitation will be forth coming.

SPECIAL NOTE:  “A Pre-Bid Site Visit will be held on 16 June 2021, 9:00AM CST at the NASA Stennis Space Center.  See Section L and FAR 52.236-27 of this DRAFT solicitation for further details.”

Project Description: The U.S. Army Corps of Engineers, St. Louis District, is seeking a firm for the rehabilitation of the miter gates at the National Aeronautics and Space Administration (NASA) John C. Stennis Space Center (SSC) Navigation Lock. The SSC is a rocket engine testing facility operated by NASA in Hancock County, Mississippi, on the banks of the Pearl River at the Mississippi–Louisiana border. The SSC is located at the southwest corner of Mississippi about 50 miles northeast of New Orleans, Louisiana, and 30 miles from the Mississippi Gulf Coast. In general, the goal of this construction project is to rehabilitate both the upper and lower miter gates, allowing the SSC to maintain marine access to the NASA test facility into the future.  This Navigation Lock rehabilitation is needed to meet the long-term mission of NASA at the SSC. A miter gate consists of a left and right-hand leaf that are opposite hand but otherwise identical. The Contractor shall remove and lay flat each miter gate leaf on a deck barge for rehabilitation. Government-furnished lock chamber stop-logs may need to be installed at the upper end of the lock, depending on the Contractor’s work plan. The miter gate rehabilitation consists of blasting and painting the gates, replacement of all timber fenders, replacement of miter gate rubber seals, and structural member replacement and repair. Rehabilitation also includes cathodic protection system removal, repair, installation, and testing by corrosion expert in accordance with specifications. All four gate leaf operating hydraulic cylinders shall be removed and shipped to a capable facility for rehabilitation. Work to be completed prior to miter gate removal includes the fabrication of one set of replacement anchor bars and pins for use at the lower left miter gate anchorage, fabrication of special “turning feet” to facilitate miter gate laydown, fabrication and installation of miter gate lifting and laydown lugs, and temporary alterations of the miter gate walkway and bulkhead plate at the top of the gates.  During the period the gates are removed, the Contractor’s certified diver shall conduct inspections of the miter gate sills, pintles, and contact blocks, with the inspection report furnished to the Government. After rehabilitation is complete, the Contractor shall upright and reinstall the miter gates, along with rehabilitated cylinders and replacement anchor bars at the lower left miter gate leaf. Testing will be required in accordance with specifications. Temporary alterations to the walkways and bulkhead plate shall be repaired as needed. The work covered by this contract will consist of furnishing all equipment, labor, services, supplies and materials necessary to satisfactorily rehabilitate the Navigation Lock at the NASA SSC as specified and in accordance with the contract specifications. Particular efforts will be required to minimize the duration of any lock closure.

Solicitation Number: W912P921R0036

Solicitation Type: Request for Proposal (RFP) – no public bid opening

Solicitation Competition: Unrestricted

NAICS Code: 237990 – Other Heavy and Civil Engineering Construction

Small business size standard is $39.5 million

Estimated Magnitude: between $5,000,000 and $10,000,000

The closing date and time for submission of offers will be contained in the solicitation package. The solicitation is expected to be issued on or about 21 May 2021. This solicitation package will be posted on the System for Award Management (BetaSAM), which can be accessed at www.beta.sam.gov.  The Government will not provide paper copies of the solicitation or the Interested Vendors List (IVL). Telephone, written, facsimile, or e-mail requests for the solicitation package or the IVL list will not be honored. Potential bidders MUST register at www.beta.sam.gov, in order to receive notification and/or changes to the solicitation.

Potential offerors are responsible for monitoring this site for the release of the solicitation package and any other pertinent information and for downloading their own copy of the solicitation package.

This notice does not obligate the Government to award a contract nor does it obligate the Government to pay for proposal preparation costs.

Be advised that all interested parties MUST be registered in the System for Award Management (SAM) Database, www.sam.gov in order to receive a contract award.

If you have any additional questions, please contact Angie Grimes at (314) 331-8965 or via email at angie.l.grimes@usace.army.mil.

Project Description: The U.S. Army Corps of Engineers, St. Louis District, is seeking a firm for the rehabilitation of the miter gates at the National Aeronautics and Space Administration (NASA) John C. Stennis Space Center (SSC) Navigation Lock. The SSC is a rocket engine testing facility operated by NASA in Hancock County, Mississippi, on the banks of the Pearl River at the Mississippi–Louisiana border. The SSC is located at the southwest corner of Mississippi about 50 miles northeast of New Orleans, Louisiana, and 30 miles from the Mississippi Gulf Coast. In general, the goal of this construction project is to rehabilitate both the upper and lower miter gates, allowing the SSC to maintain marine access to the NASA test facility into the future.  This Navigation Lock rehabilitation is needed to meet the long-term mission of NASA at the SSC. A miter gate consists of a left and right-hand leaf that are opposite hand but otherwise identical. The Contractor shall remove and lay flat each miter gate leaf on a deck barge for rehabilitation. Government-furnished lock chamber stop-logs may need to be installed at the upper end of the lock, depending on the Contractor’s work plan. The miter gate rehabilitation consists of blasting and painting the gates, replacement of all timber fenders, replacement of miter gate rubber seals, and structural member replacement and repair. Rehabilitation also includes cathodic protection system removal, repair, installation, and testing by corrosion expert in accordance with specifications. All four gate leaf operating hydraulic cylinders shall be removed and shipped to a capable facility for rehabilitation. Work to be completed prior to miter gate removal includes the fabrication of one set of replacement anchor bars and pins for use at the lower left miter gate anchorage, fabrication of special “turning feet” to facilitate miter gate laydown, fabrication and installation of miter gate lifting and laydown lugs, and temporary alterations of the miter gate walkway and bulkhead plate at the top of the gates.  During the period the gates are removed, the Contractor’s certified diver shall conduct inspections of the miter gate sills, pintles, and contact blocks, with the inspection report furnished to the Government. After rehabilitation is complete, the Contractor shall upright and reinstall the miter gates, along with rehabilitated cylinders and replacement anchor bars at the lower left miter gate leaf. Testing will be required in accordance with specifications. Temporary alterations to the walkways and bulkhead plate shall be repaired as needed. The work covered by this contract will consist of furnishing all equipment, labor, services, supplies and materials necessary to satisfactorily rehabilitate the Navigation Lock at the NASA SSC as specified and in accordance with the contract specifications. Particular efforts will be required to minimize the duration of any lock closure.

Solicitation Number: W912P921R0036

Solicitation Type: Request for Proposal (RFP) – no public bid opening

Solicitation Competition: Unrestricted

NAICS Code: 237990 – Other Heavy and Civil Engineering Construction

Small business size standard is $39.5 million

Estimated Magnitude: between $5,000,000 and $10,000,000

The closing date and time for submission of offers will be contained in the solicitation package. The solicitation is expected to be issued on or about 21 May 2021. This solicitation package will be posted on the System for Award Management (BetaSAM), which can be accessed at www.beta.sam.gov.  The Government will not provide paper copies of the solicitation or the Interested Vendors List (IVL). Telephone, written, facsimile, or e-mail requests for the solicitation package or the IVL list will not be honored. Potential bidders MUST register at www.beta.sam.gov, in order to receive notification and/or changes to the solicitation.

Potential offerors are responsible for monitoring this site for the release of the solicitation package and any other pertinent information and for downloading their own copy of the solicitation package.

This notice does not obligate the Government to award a contract nor does it obligate the Government to pay for proposal preparation costs.

Be advised that all interested parties MUST be registered in the System for Award Management (SAM) Database, www.sam.gov in order to receive a contract award.

If you have any additional questions, please contact Angie Grimes at (314) 331-8965 or via email at angie.l.grimes@usace.army.mil.