Maintenance, Repair, and Preservation of Dive Boat 65SC8801

Solicitation Amendment 0001 has been posted on 09 March 2021.

______________________

Note: This posting has been updated to provide the original solicitation (N4523A21R1060) without draft watermark, and to update the proposal due date listed in beta.SAM.gov to reflect the proposal due date listed in the solicitation. 

As considered under FAR 19.203(c), this requirement is a competitve HUBZone total small business set-aside under the North American Industry Classification System (NAICS) code 336611, size standard 1,250 employees. Offerors must possess a current Small Business Administration certification of HUBZone status to submit a proposal for this requirement. 

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of one (1) Dive Boat 65SC8801. Work will be accomplished at the Contractor's facility. 

The vessel has the follow characteristics and specifications:

                               Dive Boat 65SC8801: 65 FT Dive Boat MK-1             

Built by:                                         Swift Ships                                             

Age:                                                 32 YRS                                                 

Length:                                          64 FT -6 IN                                              

Width:                                          18 FT - 10 IN                                                             

Draft:                                             3 FT - 10 IN                                                               

Full Displacement:                        42 L Tons                                                               

Light Load:                                     35 L Tons                                                               

Hull Type:                                       Aluminum                                                               

Scope Overview:
Coordinate with the Contracting Officer (KO), via the Contracting Officer’sRepresentative (COR) to deliver the vessel to the Contractor’s facility. Upondocking vessel, wash and clean vessel. Dock, wash, and clean the exteriorsurfaces of the vessel upon docking. Remove all fendering and sweep blast clean.Perform visual inspection of hull and freeboard, tanks and main decks surfaces.Apply new Non-skid preservation system to the main-deck. Accomplish repairs onAFT Lazzerette hatch, Aft Port Stanchion and base, Main Cabin window, Port, STBD, and AFT doors, Drip pan, lagging, Fuel piping manifold, Grey wateroverboard, MPDE Overboad discharge, and Generator Supply Valves. Replacedecking in Pilot house, Galley, Diver Prep Room, WC and Shower Area, andBerthing Compartment. Blast and preserve underwater hull, body, appendages,and freeboard surfaces, pilothouse exterior. Inspect and repair shafts and ruddersand associated seals, bearings, bushings and test for operability after repairs.Perform inspections on the propellers, pitch, and balance and test for operability.Open, clean, inspect, disinfect, certify, and preserve various tanks and voidsincluding the fresh water system. Remove existing and install new zincs andassociated hardware. Conduct air test of tanks and voids. Perform seatrials after completion of repairs and full cure time of preservation.
Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the KO via the COR.

The expected Period of Performance is scheduled to be: 24 August 2021 through 21 October 2021.

The Government anticipates award of the Firm-Fixed Price, stand-alone contract in May 2021 to the responsible contractor on a lowest price, technically acceptable basis in accordance with, but not limited to, the Federal Acquisition Regulation (FAR) 15.101-2.

All Offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications cna be completed electronically via the SAM website https://www.sam.gov. 

Note: This posting has been updated to provide the original solicitation (N4523A21R1060) without draft watermark, and to update the proposal due date listed in beta.SAM.gov to reflect the proposal due date listed in the solicitation. 

As considered under FAR 19.203(c), this requirement is a competitve HUBZone total small business set-aside under the North American Industry Classification System (NAICS) code 336611, size standard 1,250 employees. Offerors must possess a current Small Business Administration certification of HUBZone status to submit a proposal for this requirement. 

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of one (1) Dive Boat 65SC8801. Work will be accomplished at the Contractor's facility. 

The vessel has the follow characteristics and specifications:

                               Dive Boat 65SC8801: 65 FT Dive Boat MK-1             

Built by:                                         Swift Ships                                             

Age:                                                 32 YRS                                                 

Length:                                          64 FT -6 IN                                              

Width:                                          18 FT - 10 IN                                                             

Draft:                                             3 FT - 10 IN                                                               

Full Displacement:                        42 L Tons                                                               

Light Load:                                     35 L Tons                                                               

Hull Type:                                       Aluminum                                                               

Scope Overview:
Coordinate with the Contracting Officer (KO), via the Contracting Officer’sRepresentative (COR) to deliver the vessel to the Contractor’s facility. Upondocking vessel, wash and clean vessel. Dock, wash, and clean the exteriorsurfaces of the vessel upon docking. Remove all fendering and sweep blast clean.Perform visual inspection of hull and freeboard, tanks and main decks surfaces.Apply new Non-skid preservation system to the main-deck. Accomplish repairs onAFT Lazzerette hatch, Aft Port Stanchion and base, Main Cabin window, Port, STBD, and AFT doors, Drip pan, lagging, Fuel piping manifold, Grey wateroverboard, MPDE Overboad discharge, and Generator Supply Valves. Replacedecking in Pilot house, Galley, Diver Prep Room, WC and Shower Area, andBerthing Compartment. Blast and preserve underwater hull, body, appendages,and freeboard surfaces, pilothouse exterior. Inspect and repair shafts and ruddersand associated seals, bearings, bushings and test for operability after repairs.Perform inspections on the propellers, pitch, and balance and test for operability.Open, clean, inspect, disinfect, certify, and preserve various tanks and voidsincluding the fresh water system. Remove existing and install new zincs andassociated hardware. Conduct air test of tanks and voids. Perform seatrials after completion of repairs and full cure time of preservation.
Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the KO via the COR.

The expected Period of Performance is scheduled to be: 24 August 2021 through 21 October 2021.

The Government anticipates award of the Firm-Fixed Price, stand-alone contract in May 2021 to the responsible contractor on a lowest price, technically acceptable basis in accordance with, but not limited to, the Federal Acquisition Regulation (FAR) 15.101-2.

All Offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications cna be completed electronically via the SAM website https://www.sam.gov. 

As considered under FAR 19.203(c), this requirement is a competitve HUBZone total small business set-aside under the North American Industry Classification System (NAICS) code 336611, size standard 1,250 employees. Offerors must possess a current Small Business Administration certification of HUBZone status to submit a proposal for this requirement. 

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of one (1) Dive Boat 65SC8801. Work will be accomplished at the Contractor's facility. 

The vessel has the follow characteristics and specifications:

                               Dive Boat 65SC8801: 65 FT Dive Boat MK-1             

Built by:                                         Swift Ships                                             

Age:                                                 32 YRS                                                 

Length:                                          64 FT -6 IN                                              

Width:                                          18 FT - 10 IN                                                             

Draft:                                             3 FT - 10 IN                                                               

Full Displacement:                        42 L Tons                                                               

Light Load:                                     35 L Tons                                                               

Hull Type:                                       Aluminum                                                               

Scope Overview:
Coordinate with the Contracting Officer (KO), via the Contracting Officer’sRepresentative (COR) to deliver the vessel to the Contractor’s facility. Upondocking vessel, wash and clean vessel. Dock, wash, and clean the exteriorsurfaces of the vessel upon docking. Remove all fendering and sweep blast clean.Perform visual inspection of hull and freeboard, tanks and main decks surfaces.Apply new Non-skid preservation system to the main-deck. Accomplish repairs onAFT Lazzerette hatch, Aft Port Stanchion and base, Main Cabin window, Port, STBD, and AFT doors, Drip pan, lagging, Fuel piping manifold, Grey wateroverboard, MPDE Overboad discharge, and Generator Supply Valves. Replacedecking in Pilot house, Galley, Diver Prep Room, WC and Shower Area, andBerthing Compartment. Blast and preserve underwater hull, body, appendages,and freeboard surfaces, pilothouse exterior. Inspect and repair shafts and ruddersand associated seals, bearings, bushings and test for operability after repairs.Perform inspections on the propellers, pitch, and balance and test for operability.Open, clean, inspect, disinfect, certify, and preserve various tanks and voidsincluding the fresh water system. Remove existing and install new zincs andassociated hardware. Conduct air test of tanks and voids. Perform seatrials after completion of repairs and full cure time of preservation.
Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the KO via the COR.

The expected Period of Performance is scheduled to be: 24 August 2021 through 21 October 2021.

The Government anticipates award of the Firm-Fixed Price, stand-alone contract in May 2021 to the responsible contractor on a lowest price, technically acceptable basis in accordance with, but not limited to, the Federal Acquisition Regulation (FAR) 15.101-2.

All Offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications cna be completed electronically via the SAM website https://www.sam.gov.