Fort Peck Hydraulic Vertical Pivot Gate
Cancelled Solicitation Posted
- Solicitation number
- W9128F26QA029
- Agency
-
ENDIST Omaha
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 238990 All Other Specialty Trade Contractors
- Place of performance
- Fort Peck, Montana 59223, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers Omaha District seeks procurement and installation of a Hydraulic Vertical Pivot Gate at Fort Peck Outside Maintenance Facility in Fort Peck, Montana, with proposals due June 2, 2026. This is a Total Small Business set-aside, IFB Firm Fixed Price contract.
Place of performance is the Fort Peck Outside Maintenance Facility at Fort Peck, Montana. The scope consists of furnishing and installing a new Hydraulic Vertical Pivot Gate with associated appurtenances to replace an existing 24-foot Double Swing Gate, including removal of the existing gate, installation of the hydraulic system, and relocation of an existing entrance gate. Work is restricted to 0630–1700 Monday through Friday, excluding federal holidays and government facility closures, with written COR approval required for work outside these hours. Period of performance is 365 days following Notice to Proceed, with all work to be completed on or before April 30, 2027.
The rough order of magnitude is $100,000 to $250,000. Contract pricing is structured on three lump-sum CLINs: furnish and install gate; labor and equipment; and mobilization/demobilization.
Technical requirements include a manufacturer's standard hydraulic vertical pivot gate system capable of minimum 2,900 open and close operations per day, with a 3,000 psi hydraulic cylinder, pressure relief valve, manual bypass system, cold weather package, radio controls, detector system, reversing edge system, magnetic lock, photo eye, and stainless steel fasteners. Installation must be performed by manufacturer-approved installers or personnel with minimum five years' experience. The gate system must meet ASTM C94/C94M concrete standards with 4,000 psi minimum 28-day compressive strength, and include factory-applied DTM epoxy prime coat and acrylic urethane topcoat with minimum three-year warranty.
All contractor personnel require AT Level I security training. E-Verify employment eligibility verification is mandatory. Davis-Bacon prevailing wage rates apply per Montana wage determinations for McCone County and Valley County (updated May 17, 2026). A mandatory site visit is scheduled for March 31, 2026 at 10:00 AM CT at Fort Peck Administration Office, 301 Kansas Street. Questions are due March 31, 2026 COB; answers will be posted on SAM.GOV by April 2, 2026 COB. Amendment 0002 (May 21, 2026) extended the original April 17 deadline and updated drawings and wage determinations; offerors must acknowledge receipt of both Amendment 0001 and Amendment 0002 with their offers. Performance and payment bonds are required. NAICS 238990; PSC Z2JZ.
Notice text
4 versions
Update #4 · Latest ·
5-21-2026: ATTENTION: AMENDMENT 0002 HAS BEEN PROVIDED IN THE ATTACHMENT SECTION; THE DRAWINGS HAVE BEEN REVISED AND THE WAGE DETERMINATION HAS BEE UPDATED. PLEASE REVIEW THE REVISED DRAWINGS, WAGE DETERMINATION, AND PROVIDE YOUR COMPANY'S UPDATED PRICE SCHEDULE ON OR BEFORE 2 JUNE 2026 BY 1200 PM CT. IN ADDTION, BE SURE TO PROVIDE THE SIGNED AMENDMENT(S) ALONG WITH YOUR REVISED PRICE SCHEDULE.
==================================================================
ATTENTION: AMENDMENT 0001 HAS BEEN PROVIDED IN THE ATTACHMENT SECTION; DRAWINGS MFP70_OMGATE DRAWINGS HAVE BEEN UPDATED TO THE MOST CURRENT DRAWINGS UNDER MFP70_OMGATE_001. PROVIDE SIGNED ACKNOWLEDGMENT WITH YOUR OFFER.
===================================================================
This SOLICITATION is for W9128F26QA029.
Solicitation for “Fort Peck Outside Maintenance Hydraulic Pivot Gate”. The solicitation will close on or before Friday, 17 April 2026 by 2:00 PM CT.
DESCRIPTION OF WORK:
The purpose of this acquisition is to secure the procurement of a Hydraulic Vertical Pivot Gate. This project will consist of installing a new Hydraulic Vertical Pivot Gate to replace the existing Double Swing Gate. The work shall consist of furnishing and installing a Hydraulic Pivot Gate and associated appurtenance, providing increased equipment security and force protection. All instructions are provided in the SOW, Specifiation 32_31_13 Hydraulica Vertical Pivot Gate 2026, Drawings, and Price Schedule.
All questions need to be submitted to the following emails: lynne.d.reed@usace.army.mil and marc.proietto@usace.army.mil on or before 31 March 2026 by COB and answers will be provided in SAM.GOV on 2 April 2026 by COB.
Place of Performance:
Ft. Peck Outside Maintenance Facility at Ft. Peck Montana
Contracting Office Address:
USACE Omaha District
1616 Capital Ave, Omaha, NE 68102-4901
Rough Order of Magnitude: $100,000.00 to $250,000.00
Site Visit:
Date: Tuesday, 31 March 2026
Time: 10:00 AM CT
Location: Fort Peck Administration Office, 301 Kansas St. Fort Peck, MT 59223
(Please contact the POC that is listed in the solicitation under FAR 52.236-27 Site Visit with your intent to attend the site visit).
Point Of Contact:
All questions regarding this solicitation should be emailed to the Contract Specialist and Contracting Officer by submitting the questions to the emails listed below.
Note: Offerors please be advised that an online registration requirement in System for Award Management (SAM) database (https://sam.gov) exists and directed solicitation provisions concerning electronic annual Representations and Certifications on SAM. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from date of submission or update to SAM. Solicitation documents will be posted to the web via SAM.gov. Registration is required to access solicitation documents. SAM.gov provides secure access to acquisition-related information, synopsis or pre-solicitation notices and amendment current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update. Contract Specialist Lynne D. Reed, who can be reached by email: lynne.d.reed@usace.army.mil and/or Contracting Officer Marc R. Proietto at marc.proietto@usace.army.mil
Update #3 ·
ATTENTION: AMENDMENT 0001 HAS BEEN PROVIDED IN THE ATTACHMENT SECTION; DRAWINGS MFP70_OMGATE DRAWINGS HAVE BEEN UPDATED TO THE MOST CURRENT DRAWINGS UNDER MFP70_OMGATE_001. PROVIDE SIGNED ACKNOWLEDGMENT WITH YOUR OFFER.
===================================================================
This SOLICITATION is for W9128F26QA029.
Solicitation for “Fort Peck Outside Maintenance Hydraulic Pivot Gate”. The solicitation will close on or before Friday, 17 April 2026 by 2:00 PM CT.
DESCRIPTION OF WORK:
The purpose of this acquisition is to secure the procurement of a Hydraulic Vertical Pivot Gate. This project will consist of installing a new Hydraulic Vertical Pivot Gate to replace the existing Double Swing Gate. The work shall consist of furnishing and installing a Hydraulic Pivot Gate and associated appurtenance, providing increased equipment security and force protection. All instructions are provided in the SOW, Specifiation 32_31_13 Hydraulica Vertical Pivot Gate 2026, Drawings, and Price Schedule.
All questions need to be submitted to the following emails: lynne.d.reed@usace.army.mil and marc.proietto@usace.army.mil on or before 31 March 2026 by COB and answers will be provided in SAM.GOV on 2 April 2026 by COB.
Place of Performance:
Ft. Peck Outside Maintenance Facility at Ft. Peck Montana
Contracting Office Address:
USACE Omaha District
1616 Capital Ave, Omaha, NE 68102-4901
Rough Order of Magnitude: $100,000.00 to $250,000.00
Site Visit:
Date: Tuesday, 31 March 2026
Time: 10:00 AM CT
Location: Fort Peck Administration Office, 301 Kansas St. Fort Peck, MT 59223
(Please contact the POC that is listed in the solicitation under FAR 52.236-27 Site Visit with your intent to attend the site visit).
Point Of Contact:
All questions regarding this solicitation should be emailed to the Contract Specialist and Contracting Officer by submitting the questions to the emails listed below.
Note: Offerors please be advised that an online registration requirement in System for Award Management (SAM) database (https://sam.gov) exists and directed solicitation provisions concerning electronic annual Representations and Certifications on SAM. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from date of submission or update to SAM. Solicitation documents will be posted to the web via SAM.gov. Registration is required to access solicitation documents. SAM.gov provides secure access to acquisition-related information, synopsis or pre-solicitation notices and amendment current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update. Contract Specialist Lynne D. Reed, who can be reached by email: lynne.d.reed@usace.army.mil and/or Contracting Officer Marc R. Proietto at marc.proietto@usace.army.mil
Update #2 ·
This SOLICITATION is for W9128F26QA029.
Solicitation for “Fort Peck Outside Maintenance Hydraulic Pivot Gate”. The solicitation will close on or before Friday, 17 April 2026 by 2:00 PM CT.
DESCRIPTION OF WORK:
The purpose of this acquisition is to secure the procurement of a Hydraulic Vertical Pivot Gate. This project will consist of installing a new Hydraulic Vertical Pivot Gate to replace the existing Double Swing Gate. The work shall consist of furnishing and installing a Hydraulic Pivot Gate and associated appurtenance, providing increased equipment security and force protection. All instructions are provided in the SOW, Specifiation 32_31_13 Hydraulica Vertical Pivot Gate 2026, Drawings, and Price Schedule.
All questions need to be submitted to the following emails: lynne.d.reed@usace.army.mil and marc.proietto@usace.army.mil on or before 31 March 2026 by COB and answers will be provided in SAM.GOV on 2 April 2026 by COB.
Place of Performance:
Fort Peck Powerhouse at Fort Peck, Montana
Contracting Office Address:
USACE Omaha District
1616 Capital Ave, Omaha, NE 68102-4901
Rough Order of Magnitude: $100,000.00 to $250,000.00
Site Visit:
Date: Tuesday, 31 March 2026
Time: 10:00 AM CT
Location: Fort Peck Administration Office, 301 Kansas St. Fort Peck, MT 59223
(Please contact the POC that is listed in the solicitation under FAR 52.236-27 Site Visit with your intent to attend the site visit).
Point Of Contact:
All questions regarding this solicitation should be emailed to the Contract Specialist and Contracting Officer by submitting the questions to the emails listed below.
Note: Offerors please be advised that an online registration requirement in System for Award Management (SAM) database (https://sam.gov) exists and directed solicitation provisions concerning electronic annual Representations and Certifications on SAM. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from date of submission or update to SAM. Solicitation documents will be posted to the web via SAM.gov. Registration is required to access solicitation documents. SAM.gov provides secure access to acquisition-related information, synopsis or pre-solicitation notices and amendment current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update. Contract Specialist Lynne D. Reed, who can be reached by email: lynne.d.reed@usace.army.mil and/or Contracting Officer Marc R. Proietto at marc.proietto@usace.army.mil
Update #1 ·
This SOLICITATION is for W9128F26QA029.
Solicitation for “Fort Peck Outside Maintenance Hydraulic Pivot Gate”. The solicitation will close on or before Friday, 17 April 2026 by 2:00 PM CT.
DESCRIPTION OF WORK:
The purpose of this acquisition is for a non-personnel services contract to provide janitorial services at Fort Peck Power Plant in Fort Peck, Montana. The Contractor shall provide all necessary labor, supervision, cleaning materials, required supplies and equipment to perform janitorial services at the Fort Peck Power Plants and associated water control structures in accordance with this Performance Work Statement (PWS) and at the locations shown on the attached drawings, except for those items specified as government furnished property and services. The Contractor shall perform all janitorial work necessary to keep the areas to be serviced in a clean, sanitary, and safe condition in accordance with the best standards of performance of such work. Work shall include sweeping, vacuuming, dusting, mopping, scrubbing, waxing, polishing, washing, cleaning, disinfecting, trash collection, removing waste, replenishing supplies, replacement of paper towel products, replacement of deodorizers, soap and disposition of wiping rags and snow removal. The contractor shall perform to the standards and performance criteria defined in this PWS.
Place of Performance:
Fort Peck Powerhouse at Fort Peck, Montana
Contracting Office Address:
USACE Omaha District
1616 Capital Ave, Omaha, NE 68102-4901
Rough Order of Magnitude: $100,000.00 to $250,000.00
Site Visit:
Date: Tuesday, 31 March 2026
Time: 10:00 AM CT
Location: Fort Peck Administration Office, 301 Kansas St. Fort Peck, MT 59223
(Please contact the POC that is listed in the solicitation under FAR 52.236-27 Site Visit with your intent to attend the site visit).
Point Of Contact:
All questions regarding this solicitation should be emailed to the Contract Specialist and Contracting Officer by submitting the questions to the emails listed below. All questions must be received on or before 12:00 PM CST, 30 March 2026. Answers will be posted by COB on 2 April 2026.
Note: Offerors please be advised that an online registration requirement in System for Award Management (SAM) database (https://sam.gov) exists and directed solicitation provisions concerning electronic annual Representations and Certifications on SAM. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from date of submission or update to SAM. Solicitation documents will be posted to the web via SAM.gov. Registration is required to access solicitation documents. SAM.gov provides secure access to acquisition-related information, synopsis or pre-solicitation notices and amendment current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update. Contract Specialist Lynne D. Reed, who can be reached by email: lynne.d.reed@usace.army.mil and/or Contracting Officer Marc R. Proietto at marc.proietto@usace.army.mil
Files
Show all 11
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| PGMB Security Gate | — | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity