Flaring and Beading Machines - Amendment 0002
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- 47QACA26Q0393
- Agency
- Not on record
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- 3441 Bending And Forming Machines
- Points of contact
-
- Melissa Martel melissa.martel@gsa.gov (202) 258-0072
Notice details come from SAM.gov. Updated .
About this opportunity
The General Services Administration, procuring on behalf of the Air Force Life Cycle Management Center, seeks quotations for seven flaring and beading machines under a Total Small Business set-aside, with quotations due September 17, 2026, at 2:00 PM Eastern Time. Amendment 0002, issued September 14, incorporated Government Responses to Vendor Questions Round 2 (Attachment 8) and extended the deadline from the previously amended date of September 3.
The machines must be floor-mounted with pneumatically operated jaws, capable of flaring on diameters 0.25 to 3 inches, beading on diameters 0.25 to 1.5 inches, and squaring on diameters 0.25 to 3 inches, with integrated flaring and beading capabilities. Each machine requires a 3 horsepower motor, variable spindle speed of 300 to 1750 RPM, 75–100 PSI air supply, cabinet stand with tooling shelf, and dimensions of 36 inches length by 26 inches width by 46 inches height weighing 750 pounds. Delivery locations span seven Air Force installations: Cannon, Shaw, Little Rock, Travis, Minot, Scott, and Peoria. All seven machines must be ready for shipment within 365 days of contract award; scheduled roll-out delivery is permitted with a minimum of one machine per month acceptable if needed.
This is a Firm-Fixed Price supply contract conducted under FAR Part 13 Simplified Acquisition Procedures and FAR Part 12, Acquisition of Commercial Products and Commercial Services. The NAICS code is 333517, Machine Tool Manufacturing; PSC code is 3441, Bending and Forming Machines. Evaluation uses Lowest Price Technically Acceptable methodology. Offerors must submit a completed Technical Matrix (Attachment 2) on a pass-fail basis and a Pricing Spreadsheet (Attachment 3) with all shipping and freight costs included, f.o.b. destination. Quotations must be submitted electronically to Contracting Officer Melissa Martel at melissa.martel@gsa.gov. Offerors must be registered in GSA's ASSIST system prior to award and comply with Buy American, small business certification, and electronic funds transfer requirements.
Notice text
3 versions
Update #3 · Latest ·
UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.
UPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.
This is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.
Update #2 ·
UPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.
This is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.
Update #1 ·
This is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.
Attachments
| File | Type | Posted |
|---|---|---|
| SF30_A0002_47QACA26Q0393_Round2RFIResponses_2026-09-14.pdf | ||
| SF30_A0001_47QACA26Q0393_FlaringAndBeading_2026-08-26.pdf | ||
| 47QACA26Q0393_RFQ_FlaringAndBeadingWithAllAttachments_2026-08-12.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Flaring and Beading Machines - Notice of Award | Award Notice | |
| Flaring and Beading Machines - Amendment 0002 | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity