F-15 Wing Skid Fabrication
Closed Solicitation Posted
- Solicitation number
- FA860425QB002
- Agency
-
AFLCMC Wright Patterson AFB
Lifecycle Management Center, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332812 Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
- PSC
- J023 Maint/Repair/Rebuild Of Equipment- Ground Effect Vehicles, Motor Vehicles, Trailers, And Cycles
- Place of performance
- Wright Patterson AFB, Ohio 45433, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Lifecycle Management Center at Wright Patterson Air Force Base is seeking painting services for 12 steel skid assemblies for the Air Force Packaging and Engineering Facility. The solicitation is a combined synopsis/solicitation for commercial items using Simplified Acquisition Procedures, targeting a Firm Fixed Price (FFP) contract. The government will provide 12 unpainted steel assemblies to the contractor in 4 lots of 3, which must be painted according to specific technical specifications, including SSPC-SP6/NACE 3 surface preparation and PDS-B67A5 red oxide recoatable epoxy primer. Quotes will be evaluated using a lowest-price technically acceptable approach, with offerors required to conform to the Performance Work Statement and provide a complete description of their equipment. The solicitation requires electronic quote submission by June 5, 2025, at 12:00 PM EST, with quotes to be sent directly to Contract Specialist Christy Delk and Contracting Officer Owen Manning.
The contract is a 100% small business set-aside under NAICS code 332812 with a size standard of 600 employees. The paint facility must be located within 70 miles of Wright Patterson Air Force Base, and each lot of 3 assemblies must be completed within 15-20 business days of delivery. The overall contract performance period runs from June 1, 2025, through May 31, 2026, with a total of 12 steel skid assemblies to be painted, including components such as Skid Weldment, Cradle Weldments, Accessory Box Assembly, and Bracket Weldment. The total weight of the assemblies is approximately 1,200 pounds, with the largest component weighing around 900 pounds. The government will handle transportation of the unpainted and painted assemblies using base transportation services, and contractors must be registered in the System for Award Management (SAM) to be considered for the contract.
Notice text
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information, included in this notice. This announcement constitutes the only solicitation; quotes are being requested and an additional written solicitation will not be issued. The solicitation is conducted as a commercial procurement using Simplified Acquisition Procedures (FAR Part 13). This notice is expected to result in award of a Firm Fixed Price (FFP) contract for a commercial commodity to the responsible offeror who submits a quotation that: (1) conforms to the requirements, (2) complies with the minimum requirements stated in the Performance Work Statement (PWS) as evidenced by providing a complete description of the equipment provided, and (3) that submits the quotation with the lowest price technically acceptable, provided that the price is determined to be fair and reasonable.
This requirement shall be 100% small business set aside under NAICS 332812 with a size standard of 600 Employees.
The Air Force Packaging and Engineering Facility (AFPTEF) has a requirement. The Government requires services for the painting of 12 steel skid assemblies. The Government will provide and deliver the unpainted 12 steel assemblies to the contractor facility in 4 lots of 3 assemblies prior to painting. The Government will pick up the painted assemblies from the contractor facility after painting is completed
Quotes must be submitted electronically to the Contract Specialist via e-mail at christy.delk@us.af.mil and owen.manning.1@us.af.mil, Contracting Officer.. Quotes must conform to the requirements of this solicitation and be received no later than 5 June 2025 at 12:00 PM EST. It is the responsibility of the offeror to ensure that the quote and its attachments are received. Any correspondence sent via e-mail must contain the subject line “FA860425QB002 - F-15 Wing Skid Fabrication"
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Hill AFB Painting ID/IQ Sources Sought | Air Force Sustainment Center | Competitive 8(a) | |
| Aircraft Coatings and Sealants OO-ALC | Air Force Sustainment Center | Total Small Business | |
| AMXG Aircraft Painters Follow-On | Air Force Sustainment Center | Competitive 8(a) | |
| Paint Services in support of the HC-144 Aircraft. | Coast Guard | No set-aside | |
| Protective Coating Maintenance IDIQ | Air Education and Training Command | Economically Disadvantaged Woman-Owned Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity