Drydock for USCGC pompano

Added: Sep 09, 2010 4:31 pm 09/09/2010 SOLICITATION FOR CGC POMPANO (DOWNLOAD 3 ATTACHED FILES)

Added: Aug 03, 2010 11:38 am The United States Coast Guard, Surface Forces Logistics Center, Detachment Norfolk VA, intends to issue a Commercial Request for Quote (RFQ) for Dry-dock and repairs to the USCGC POMPANO (WPB-87339) 87-FOOT PATROL BOAT. The vessel is home ported in Gulfport, MS. The NAICS Code is 336611.

The simplified acquisition will be issued as a Service-Disabled Veteran-Owned Small Business Set-Aside. Request for Quotes (RFQ) will be issued on or about October 5, 2010.

There is a Geographical restriction of 492 Nautical Miles one-way or 984 round-trip from the cutter's homeport of Gulfport, Mississippi.

The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items.

The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.

All work will be performed at the contractor's facility. The performance period is schedule for Forty-Four (44) calendar days and is expected to begin on or about January 5, 2011.

The scope of the acquisition will include, but is not limited to:

1. Perform Ultrasonic Thickness Measurements
2. Perform Ultrasonic Thickness Measurements
3. Perform Hull and Structural Plating Repairs in Forepeak, Engine Room and Lazarette - Eroded Welds (Steel)
4. Clean and Inspect Dirty Oil Tank
5. Clean and Inspect Oily Water Tank
6. Clean and Inspect Fuel Service Tanks
7. Clean and Inspect Grey Water Tank
8. Clean and Inspect Sewage Tank
9. Clean Grey Water Piping System
10. Clean Sewage Piping System
11. Inspect RHIB Notch Skid Pads
12. Renew RHIB Notch Skid Pad Studs
13. Realign Main Engine/Reduction Gear
14. Remove, Inspect, and Reinstall Propeller Shafts
15. Repair Shaft
16. Straighten Shaft
17. Renew Intermediate Water-Lubricated Shaft Bearing
18. Renew Aft Water-Lubricated Shaft Bearing
19. Renew Intermediate Bearing Carrier
20. Renew Aft Bearing Carrier
21. Remove, Inspect, and Reinstall Propellers
22. Perform Minor Repair and Recondition of Propeller
23. Renew Depth Indicating Transducer
24. Renew Sea Valves and Inspect Associated Piping and Strainers
25. Remove, Inspect, and Reinstall Rudder Assemblies
26. Remove, Inspect and Reinstall Stern Launch Door, and Inspect Door Pivot Pins, Bushings, and Washers
27. Preserve Underwater Body - Partial
28. Preserve Underwater Body - 100%
29. Preserve Stern Tubes
30. Modify and Renew Cathodic Protection System
31. Renew Transducer Fairing
32. Routine Drydocking
33. Provide Temporary Logistics
34. Modify and Preserve the Forepeak (EC 087-A-033)
35. Preserve Mast
A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to Nancy.M.Brinkman@uscg.mil The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

Quotes are due on or about November 5, 2010, 2:00 pm Eastern Standard Time and may be sent via:

Email: nancy.m.brinkman@uscg.mil

Fax: (757) 628-4628

Mail to:

US Coast Guard
SFLC/PBPL/CP1
Attn: Nancy Brinkman
300 East Main Street, Suite 600
Norfolk, VA 23510-9102