Coordinate Measuring Machines for Depot Level Maintenance on T408 Engine
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N68335-25-R-0269
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333515 Cutting Tool and Machine Tool Accessory Manufacturing
- Place of performance
- United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Air Warfare Center Aircraft Division is seeking to procure two Moving Bridge Coordinate Measuring Machines (CMMs) for measuring General Electric T408 Jet Engine Compressor Rotors and Stators through an unrestricted competitive solicitation. The contract, identified as N68335-25-R-0269, requires U.S. Government or DoD contractors who are registered in the System for Award Management (SAM) database. Interested offerors must submit a DD Form 2345 by January 27, 2025, to access solicitation documents, with all questions due by January 31, 2025. The government will evaluate proposals using the lowest price technically acceptable (LPТА) method, with technical proposals limited to 50 pages and requiring detailed salient characteristics documentation. Proposals must be submitted electronically through DOD Safe by 12:00 PM EST on February 20, 2025, with a point of contact established as Tammy Fossa from the contracting office.
The solicitation does not include any specific set-aside designations and will be awarded on a firm-fixed price basis as a rated order for national defense use. The CMMs will be installed at Fleet Readiness Center East (FRCE) in a cleared shop location, with the final position already determined. Other Than Small Businesses must include a subcontracting plan with their proposal, and contractors will need to develop measurement programs for T406 Rotor and Stator components. Cybersecurity requirements specify the use of Windows "Operator" common accounts and individual CMM software passwords. The acquisition involves detailed technical specifications, including requirements for data output that must support both standard PC-DMIS reports and direct integration with existing surface/blade tip grinders. Acceptance testing will involve comparing dimensional reports between the new and existing CMMs to ensure precise measurement capabilities for critical engine components.
Notice text
6 versions
Update #6 · Latest ·
Amendment 0004 is for the purpose of providing an answer to a vendor question. All other information remains unchanged, and the closing date is not extended at this time.
***End Update to Amendment 0004***
Amendment 0003 is for the purpose of providing clarifying information regarding the issuance of documents associated with this solicitation and the requirement for an accompanying DD Form 2345, and for publishing an Offeror question/providing the Government's answer. All other information remains unchanged, and the closing date is not extended at this time.
***End Update to Amendment 0003***
UPDATE TO AMENDMENT 0002: RFP N68335-25-R-0269-0002 was inadvertently omitted from the last solicitation update. It has now been uploaded to this posting
***End Update to Amendment 0002***
Amendment 0002 is for the purpose of providing additional photographs of the installation site, making a few minor administrative corrections to the RFP, and providing additional instructions related to electronic proposal submission. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0002***
Amendment 0001 is for the purpose of providing answers to potential offerors' questions. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMMs) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators in accordance with the attached Solicitation N68335-25-R-0269. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 27 January 2025 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 20 February 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 31 January 2025.
Update #5 ·
Amendment 0003 is for the purpose of providing clarifying information regarding the issuance of documents associated with this solicitation and the requirement for an accompanying DD Form 2345, and for publishing an Offeror question/providing the Government's answer. All other information remains unchanged, and the closing date is not extended at this time.
***End Update to Amendment 0003***
UPDATE TO AMENDMENT 0002: RFP N68335-25-R-0269-0002 was inadvertently omitted from the last solicitation update. It has now been uploaded to this posting
***End Update to Amendment 0002***
Amendment 0002 is for the purpose of providing additional photographs of the installation site, making a few minor administrative corrections to the RFP, and providing additional instructions related to electronic proposal submission. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0002***
Amendment 0001 is for the purpose of providing answers to potential offerors' questions. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMMs) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators in accordance with the attached Solicitation N68335-25-R-0269. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 27 January 2025 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 20 February 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 31 January 2025.
Update #4 ·
UPDATE TO AMENDMENT 0002: RFP N68335-25-R-0269-0002 was inadvertently omitted from the last solicitation update. It has now been uploaded to this posting
***End Update to Amendment 0002***
Amendment 0002 is for the purpose of providing additional photographs of the installation site, making a few minor administrative corrections to the RFP, and providing additional instructions related to electronic proposal submission. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0002***
Amendment 0001 is for the purpose of providing answers to potential offerors' questions. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMMs) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators in accordance with the attached Solicitation N68335-25-R-0269. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 27 January 2025 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 20 February 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 31 January 2025.
Update #3 ·
Amendment 0002 is for the purpose of providing additional photographs of the installation site, making a few minor administrative corrections to the RFP, and providing additional instructions related to electronic proposal submission. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0002***
Amendment 0001 is for the purpose of providing answers to potential offerors' questions. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMMs) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators in accordance with the attached Solicitation N68335-25-R-0269. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 27 January 2025 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 20 February 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 31 January 2025.
Update #2 ·
Amendment 0001 is for the purpose of providing answers to potential offerors' questions. All other information remains unchanged, and the closing date is not extended at this time.
***End Changes for Amendment 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMMs) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators in accordance with the attached Solicitation N68335-25-R-0269. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 27 January 2025 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 20 February 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 31 January 2025.
Update #1 ·
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMMs) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators in accordance with the attached Solicitation N68335-25-R-0269. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 27 January 2025 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 20 February 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 31 January 2025.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| Coordinate Measuring Machines for Depot Level Maintenance on T408 Engine | Award Notice | |
| This notice | Solicitation | |
| Coordinate Measuring Machines for Depot Level Maintenance on T408 Engine | Pre-Solicitation | |
| Coordinate Measuring Machines for Depot Level Maintenance on T408 Engine | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Coordinate Measuring Machine (CMM) | Aviation | No set-aside | |
| V250 and TMS kit | ACC Redstone | No set-aside | |
| Propulsor Device Machining | Naval Sea Systems Command | Total Small Business | |
| Control-monitor set | Land and Maritime | No set-aside | |
| Labmaster Universal | Marine Corps | 8(a) Sole Source |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity