RFP N68335-25-R-0269 Amd 0003 (0411 H53K T408 CMM-TBD).pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

See Summary of Changes

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Feb-2025

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6833525R0269

X 9B. DATED (SEE ITEM 11)

21-Jan-2025

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Feb-2025

CODE

NAVAL AIR WARFARE CENTER AD (LKE)

CODE 2.5.2.3.2 B120-2, HWY 547

LAKEHURST NJ 08733-5082

N68335 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6833525R0269

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0003

The purpose of this modification is to:

1. Add clarifying language regarding the requirement for a DD2345 in order to receive documents associated with this solicitation, and

2. Provide answers to the following question:

QUESTION: Can you confirm that prints and models for the below parts have been supplied in the latest document release?

ANSWER: As stated in the SOW, the government has provided dimensional data that is intended to be used to estimate tooling cost. The prints and models will not be supplied by the government. Drawings and models used to design tooling are only available through General Electric. They are not the property of the Government to distribute. The successful offeror will have to follow the process of General Electric to access the engine part data after contract award, at which time the Government will provide the appropriate General Electric point of contact.

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

SOLICITATION INFORMATION

This is a Request for Proposal for the procurement of two (2) Moving Bridge Coordinate Measuring Machines (CMM) for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators.

This effort will be solicited on a full and open competitive basis; the resultant contract will be a competitively awarded rated order certified for national defense use, on a firm-fixed price basis, to the responsible business that can provide the required design, development and fabrication in accordance with the government specifications, known as the Salient Characteristics Requirements List for the two (2) CMMs (known as CMM #1 and CMM #2) that serves as the lowest price technically acceptable solution to the Government. In the event only one Offeror provides a responsive proposal, the Offeror must be prepared to provide additional information necessary to determine a price fair and reasonable if requested for the total proposal.

The awardee is required to follow all the provisions of the Defense Priorities and Allocations System regulations (15 CFR part 700).

SCD

In accordance with FAR 42.1105, the Surveillance Criticality Designator (SCD) assigned is “C”.

IMPORTANT INFORMATION: Registration in the Department of Defense DoD System for Award Management (SAM) database will be a prerequisite for receiving an award. For more information on the SAM, refer to the SAM website at https://www.sam.gov/content/opportunities. Offerors are required to have a current (no more than three years old) NIST SP 800-171 assessment on record and posted in the Supplier Performance Risk System (SPRS) in order to be considered for an award. For more information on the NIST SP 800-171 DoD Assessment in SPRS, refer to the SPRS website at https://www.sprs.csd.disa.mil/.

Proposal validity shall be no less than 180 days from the date specified in Block 8.

BL52000 Government Points Of Contact (POCs) Tammy Fossa, Contract Specialist, (240) 577-8312, tamara.d.fossa.civ@us.navy.mil Will Hemhauser, Contracting Officer, (240) 572-9079, william.t.hemhauser.civ@us.navy.mil

DD2345

Documents related to this procurement with a Distribution Statement are export controlled and require a DD Form 2345 that is signed, current, and approved by both US and Canadian Officials in Blocks 8 and 9 in order to obtain access. Requests for the Statement of Work and all associated documents, including the Salient Characteristics Requirements List, should be submitted to william.t.hemhauser.civ@us.navy.mil and tamara.d.fossa.civ@us.navy.mil no later than Monday 27 January 2025, 4 PM EST. The document package shall be delivered via DOD Safe to the vendor's secure data custodian listed on the DD Form 2345 on the next working day after the closing date of drawing requests. When requesting the document package, the Offeror shall provide the approved DD 2345. Any submissions or requests for documents pertaining to this solicitation submitted after the deadline specified in this paragraph may not be considered and the closing date and time of this solicitation may not be extended for late requests. Documents without a Distribution Statement may be provided to an Offeror upon request without an accompanying DD Form 2345.

(End of Summary of Changes)