Condenser Replacement
Closed Solicitation Posted
- Solicitation number
- FA282324Q0015
- Agency
- Air Force Test Center Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 238220 Plumbing, Heating, and Air-Conditioning Contractors
- PSC
- J041 Maint/Repair/Rebuild Of Equipment- Refrigeration, Air Conditioning, And Air Circulating Equipment
- Place of performance
- Eglin AFB, Florida 32542, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks a contractor to replace a condenser unit at an Air Force Materiel Command Test Center facility in Eglin Air Force Base, Florida. The contractor will remove an existing condenser unit model TCDV 251-A and install a new unit that meets current lab cooling requirements. The contractor must provide all labor, materials, equipment, transportation, and safety gear for a complete installation. Technicians must be air conditioning systems qualified with at least one year of experience working on HVAC systems. Proposals will be evaluated based on price and technical acceptability, with the award intended to be made to the lowest priced technically acceptable offeror. Proposals are due by March 5, 2024.
There is no set-aside designated for this requirement. The place of performance is Eglin AFB, Florida. The contractor must complete installation within two weeks of arriving on site, with delivery required within 14 weeks of award. The solicitation number is FA282324Q0015 and is seeking services under NAICS 238220 - Plumbing, Heating, and Air-Conditioning Contractors. The wage determination lists prevailing rates for over 100 occupations involved in the work.
Notice text
Contractor to provide all compatible components necessary to:
•Remove power to existing condenser unit Model TCDV 251-A using proper lock out tag out
procedures.
•Remove the existing condenser unit Model TCDV 251-A and all connected hardware.
•Remove and recover refrigerant in accordance with EPA guidelines.
•Install new condenser unit that meets current lab requirements for cooling (see “Unit To Be
Replaced Specifications” below).
•Secure power to new condenser unit.
•Charge system with refrigerant to factory specifications.
•Perform start up and verify proper operation.
•Install protective barrier around perimeter to prevent damage to coil intake.
•Removal and disposal of old unit.
Contractor shall provide all labor, materials, equipment, transportation, and safety equipment for
all elements of the project to provide a complete and properly operative installation.
Contractor is to provide an itemized service proposal when solicitation is open for bid.
Technicians performing the work shall be Air Condition Systems qualified and have no less than
one (1) years minimum of experience inspecting, maintaining, and repairing A/C Systems.
Attachments
| File | Type | Posted |
|---|---|---|
| Questions and Answers.docx | DOCX document | |
| RFQ Addendums 2.pdf | ||
| SOW Redacted 2-14-24.pdf | ||
| Solicitation Amendment - FA282324Q00150002.pdf | ||
| Solicitation Amendment FA282324Q00150002 SF 30.pdf | ||
| WD.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity