COMPETITIVE - Non-commercial Build-to-Print Machine Shop Assemblies-Machining/Manufacturing and Composite Fabrication
Award Notice Posted
- Solicitation number
- N0016418RWS21
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Awarded
- to Starwin Industries, LLC
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- N0016419DWS21 Federal IDV award
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
About this opportunity
This Award Notice from the Department of the Navy Naval Sea Systems Command announces the award of an indefinite delivery indefinite quantity multiple award contract to provide non-commercial build-to-print machine shop assemblies including machining, manufacturing, and composite fabrication services in support of naval aircraft components. Up to twelve contractors may receive fixed price contracts guaranteed a minimum of $5,000 each over the five year period to perform services such as precision machining, welding, fabrication, assembly, inspection, and composite operations for materials and components.
Notice text
18 versions
Update #18 · Latest ·
Awarded Vendors: Middletown Composites, Inc.. Contract Award Dollar Amount: NTE $35,000,000.00. Contract Award Date: 2019-03-29.
Update #17 ·
Awarded Vendors: MSP Aviation, Inc. Contract Award Dollar Amount: NTE $35,000,000.00. Contract Award Date: 2019-03-29.
Update #16 ·
Awarded Vendors: D-J Engineering, Inc.. Contract Award Dollar Amount: NTE $35,000,000.00. Contract Award Date: 2019-03-29.
Update #15 ·
Awarded Vendors: Loughmiller Machine, Tool & Design. Contract Award Dollar Amount: NTE $35,000,000.00. Contract Award Date: 2019-03-29.
Update #14 ·
Awarded Vendors: Garrity Tool Company, LLC,. Contract Award Dollar Amount: NTE $35,000,000.00. Contract Award Date: 2019-03-29.
Update #13 ·
Awarded Vendors: Starwin Industries, Inc.. Contract Award Dollar Amount: $35,000,000.00. Contract Award Date: 2019-03-29.
Update #12 ·
AMENDMENT 0004:
Provide answers to vendor questions regarding composite sample part. SECTION: L - QUESTIONS & ANSWERS - 2.
Update #11 ·
AMENDMENT 0004:
Provide answers to vendor questions regarding composite sample part. SECTION: L - QUESTIONS & ANSWERS - 2
Update #10 ·
SOLICITATION AMENDMENT 0003:
Answer Vendor questions regarding solicitation and product sample Section: L - QUESTIONS & ANSWERS.
Proposal evaluation changes Section: M - BEST VALUE EVALUATION
.
Update #9 ·
SOLICITATION AMENDMENT 0003:
Answer Vendor questions regarding solicitation and product sample Section: L - QUESTIONS & ANSWERS.
Proposal evaluation changes Section: M - BEST VALUE EVALUATION
Update #8 ·
SOLICITATION AMENDMENT 0002:
See Summary of Changes - Page 2 through 10.
Refer to SOW paragraph 2.4 and 3.4 and CNIN-L-0002 for changes.
Proposal Contents A) 2) NOTE clarifies the composite sample part requirements and A) 3) changes proposal and sample product delivery address.
Other changes include removing the requirement for NADCAP and FAA repair facility certification. The composite sample is called out to be constructed 1/2 scale. Half scale or full scale is acceptable to the government and provided as an option to the offeror. If half scale is chosen the sidewall thickness is optional if it makes it easier to work with the material. Any variations should be explained and submitted in the certification package. The type of composite material is not specified so any composite material available will meet the requirement.
.
Update #7 ·
SOLICITATION AMENDMENT 0002:
See Summary of Changes - Page 2 through 10.
Refer to SOW paragraph 2.4 and 3.4 and CNIN-L-0002 for changes.
Proposal Contents A) 2) NOTE clarifies the composite sample part requirements and A) 3) changes proposal and sample product delivery address.
Other changes include removing the requirement for NADCAP and FAA repair facility certification. The composite sample is called out to be constructed 1/2 scale. Half scale or full scale is acceptable to the government and provided as an option to the offeror. If half scale is chosen the sidewall thickness is optional if it makes it easier to work with the material. Any variations should be explained and submitted in the certification package. The type of composite material is not specified so any composite material available will meet the requirement.
Update #6 ·
SOLICITATION AMENDMENT 0001:
This amendment extends the closing date for receipt of offers to 25 May 2018.
.
Update #5 ·
SOLICITATION AMENDMENT 0001:
This amendment extends the closing date for receipt of offers to 25 May 2018.
Update #4 ·
SOLICITATION AND CONTROLLED ATTACHMENTS.
Update #3 ·
SOLICITATION AND CONTROLLED ATTACHMENTS
Update #2 ·
N00164-18-R-WS21 - COMPETITIVE - Non-commercial Build-to-Print Machine Shop Assemblies-Machining/Manufacturing and Composite Fabrication - FSC 3470 - NAICS 336413
This synopsis replaces N00164-17-R-WS21 issued 24 August 2017.
Synopsis Issue Date: 29 November 2017 - Closing Date: 01 December 2017 - 1400 EST (EDT)
Anticipated RFP Issue Date: 01 December 2017 - Closing Date: 31 January 2018 - 1400 EST
ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane plans to award an Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Contract (MAC) in support of build-to-print machine shop requirements for supplies/services related to EA-18G and P-8A aircraft components, as well as various other related platforms. Requirements include but not limited to:
• Precision machining operations such as sawing, grinding, turning, and milling of both metallic and non-metallic materials.
• Welding, fabrication, and assembly of metallic and non-metallic materials and components to produce completed assemblies in accordance with drawings or 3-D models and within the defined tolerances
• Other various machine shop services including but not limited to water jet cutting, plasma & laser cutting, hot and cold forming, tool & die fabrication, as well as inspection & certification.
• Composite capabilities such as autoclave operations, prepreg and wet lay-up operations, grinding, sanding, patching/repair work, debulking, testing, and certification of materials and adhesives.
Additionally, prospective vendors will be required to submit a product sample, of the government's choosing, in order to display expertise in either machining and fabrication, or composite fabrication, or both areas. Product samples requirements will be identified in any resultant request for proposals (RFP) and will be due at time of proposal identified within any resultant RFP.As part of the product sample evaluation, laboratory measurements and field tests may be used to determine compliance with the drawing.
In addition to the product sample, offers shall submit a proposal in response to the factors and sub-factors described in the solicitation in such detail to allow the Government to evaluate the proposal. However, if the product sample fails the evaluation or no product sample is submitted as a part of the complete proposal submission, the offeror's proposal will not be further evaluated and thus will not be considered for award.
Following the evaluation, it is planned to award FFP, Five-Year, IDIQ Multiple Award Contracts to a maximum of twelve (12) contractors for the requirements, with each awardee guaranteed an anticipated minimum dollar amount of $5,000 over the course of the five-year period. .
This is 100% small business set aside and all responsible sources may submit an offer that will be considered. Proposers will be asked to indicate the size category (large, small, small-disadvantaged, etc.).
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov.
All changes that occur prior to the closing date will be posted to the FedBizOpps website. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and / or award.
A solicitation will be available at FedBizOpps and no hard copies of the solicitation will be mailed. It is the responsibility of the offeror to submit offers to the Point of Contact (POC) at NSWC Crane. The POC is David Harrell, Code 0242 at Tel: (812)854-8291 or e-mail david.l.harrell@navy.mil. Reference the above solicitation number when responding to this notice. It is the responsibility of interested vendors to monitor FedBizOpps for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award.
Contracting Office Address:
Code 0242, Building 121
300 Highway 361
Crane, IN 47522-5000
.
Update #1 ·
N00164-18-R-WS21 - COMPETITIVE - Non-commercial Build-to-Print Machine Shop Assemblies-Machining/Manufacturing and Composite Fabrication - FSC 3470 - NAICS 336413
This synopsis replaces N00164-17-R-WS21 issued 24 August 2017.
Synopsis Issue Date: 29 November 2017 - Closing Date: 01 December 2017 - 1400 EST (EDT)
Anticipated RFP Issue Date: 01 December 2017 - Closing Date: 31 January 2018 - 1400 EST
ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane plans to award an Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Contract (MAC) in support of build-to-print machine shop requirements for supplies/services related to EA-18G and P-8A aircraft components, as well as various other related platforms. Requirements include but not limited to:
• Precision machining operations such as sawing, grinding, turning, and milling of both metallic and non-metallic materials.
• Welding, fabrication, and assembly of metallic and non-metallic materials and components to produce completed assemblies in accordance with drawings or 3-D models and within the defined tolerances
• Other various machine shop services including but not limited to water jet cutting, plasma & laser cutting, hot and cold forming, tool & die fabrication, as well as inspection & certification.
• Composite capabilities such as autoclave operations, prepreg and wet lay-up operations, grinding, sanding, patching/repair work, debulking, testing, and certification of materials and adhesives.
Additionally, prospective vendors will be required to submit a product sample, of the government's choosing, in order to display expertise in either machining and fabrication, or composite fabrication, or both areas. Product samples requirements will be identified in any resultant request for proposals (RFP) and will be due at time of proposal identified within any resultant RFP.As part of the product sample evaluation, laboratory measurements and field tests may be used to determine compliance with the drawing.
In addition to the product sample, offers shall submit a proposal in response to the factors and sub-factors described in the solicitation in such detail to allow the Government to evaluate the proposal. However, if the product sample fails the evaluation or no product sample is submitted as a part of the complete proposal submission, the offeror's proposal will not be further evaluated and thus will not be considered for award.
Following the evaluation, it is planned to award FFP, Five-Year, IDIQ Multiple Award Contracts to a maximum of twelve (12) contractors for the requirements, with each awardee guaranteed an anticipated minimum dollar amount of $5,000 over the course of the five-year period. .
This is 100% small business set aside and all responsible sources may submit an offer that will be considered. Proposers will be asked to indicate the size category (large, small, small-disadvantaged, etc.).
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov.
All changes that occur prior to the closing date will be posted to the FedBizOpps website. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and / or award.
A solicitation will be available at FedBizOpps and no hard copies of the solicitation will be mailed. It is the responsibility of the offeror to submit offers to the Point of Contact (POC) at NSWC Crane. The POC is David Harrell, Code 0242 at Tel: (812)854-8291 or e-mail david.l.harrell@navy.mil. Reference the above solicitation number when responding to this notice. It is the responsibility of interested vendors to monitor FedBizOpps for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award.
Contracting Office Address:
Code 0242, Building 121
300 Highway 361
Crane, IN 47522-5000
Files
| File | Type | Posted |
|---|---|---|
| 18RWS21_0004.pdf | ||
| 18RWS21sol_0003.pdf | ||
| 18RWS21_sol_0002.pdf | ||
| 18RWS21_sol_0001.pdf | ||
| N00164-18-R-WS21.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| 5-year, Long Term, Multiple Award, Indefinite-Delivery, Indefinite-Quantity Procurement Contract | Naval Supply Systems Command | No set-aside | |
| Propulsor Device Machining | Naval Sea Systems Command | Total Small Business | |
| 5 year IDIQ All level 1 and SUBSAFE Material. | Naval Sea Systems Command | No set-aside | |
| I.D. Plate | Naval Supply Systems Command | No set-aside | |
| Manifold assembly, H, in repair/modification of | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity