CNC Knee Mill Controller, Installation and Training

Added: Aug 29, 2016 1:39 pm To extend the bid due date from 24 Aug 2016 to 6 Sep 2016, by 2:00 PM PST.



Questions extended to 31 Aug 2016.

Added: Aug 08, 2016 1:10 pm Modified: Aug 10, 2016 1:19 pmTrack Changes SYNOPSITATION FOR: CNC Knee Mill Controller, Installation and Training
DELIVERY LOCATION: VIRGINA BEACH, VA 23459-2944
DELIVERY DATE: 12 Sep 2016, services Period of Performance 12 Sep 2016 to Contractor propose completetion date.
SOLICITATION NUMBER: H92240-16-T-0090
CONTRACT SELECTION: Competitive, Single Award
SET ASIDE: 100% Small Business
SIZE STANDARD: 750

TYPE OF ANNOUNCEMENT: This synopsis, and solicitation (to be attached at a later date) for commercial items is prepared in accordance with (IAW) the format in Federal Acquisition Regulation (FAR) subpart 12.

Solicitation and all other pertinent attachments to be attached on 10 Aug 16.

IAW FAR 5.203 (a)(1), the synopsis is being posted 2 day before issuance of the solicitation.

A written solicitation is being used to facilitate proposal preparation and evaluation. The written solicitation must be downloaded from www.fbo.gov. No hard copies will be issued. On the page where the solicitation is posted is a link to a registration page if you would like to receive notices of amendments and/or addenda that may be issued to the solicitation. If you do no register, it is your responsibility to periodically review the web site for any changes to the RFQ. Contractors that are debarred, suspended or proposed for debarment are excluded from receiving contracts. Proposal prepared by debarred, suspended or otherwise ineligible contractors are at the risk and expense of the contractor. Contractors must be registered in the System for Award Management (SAM) system prior to award for solicitations issued after 31 May 1998. To register in SAM, go to https://www.sam.gov/portal/SAM/#1#1.

DESCRIPTION OF REQUIREMENT: The requirement is to procure a CNC Knee Mill Controller Kit, installation and training to four government personnel.

SITE VISIT: A site visit will not be conducted

TYPE OF SOLICITATION: Solicitation H92240-16-T-0090 is a Request for Quote (RFQ). Proposals are due 24 Aug 2016, by 2:00 PM PST.

METHOD OF EVALUATION: This acquisition will use Lowest Price technique to make a best value award decision.

QUESTIONS: All questions shall be submitted in writing by 2:00 PM PST on 16 Aug 2016, and via email to Loriell.Rumsey@socom.mil to be accepted. TELEPHONE OR FAXED INQUIRES WILL NOT BE ACCECPTED.

POINT OF CONTACT: Complete quotes are due no later than 2:00 PM PST on 24 Aug 2016. Proposals shall be sent via email to Loriell.Rumsey@socom.mil to be accepted.

All correspondence sent via e-mail shall contain a subject line that reads, H92240-16-T-0090 CNC Knee Mill Controller. E-mail filters at NAVSOC are designed to filter e-mails without subject line or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the prescribed subject line is not included, the e-mail may not get through the e-mail filters. Also .zip or .exe files are prohibited attachments and may be deleted by the e-mail filters at NAVSOC. Ensure only .pdf, .doc, or .xls documents are sent as attachments to e-mail. The e-mail filters may delete any other form of attachments.

Added: Aug 08, 2016 1:10 pm SYNOPSITATION FOR: CNC Knee Mill Controller, Installation and Training
DELIVERY LOCATION: VIRGINA BEACH, VA 23459-2944
DELIVERY DATE: 12 Sep 2016, services Period of Performance 12 Sep 2016 to Contractor propose completetion date.
SOLICITATION NUMBER: H92240-16-T-0090
CONTRACT SELECTION: Competitive, Single Award
SET ASIDE: 100% Small Business
SIZE STANDARD: 750

TYPE OF ANNOUNCEMENT: This synopsis, and solicitation (to be attached at a later date) for commercial items is prepared in accordance with (IAW) the format in Federal Acquisition Regulation (FAR) subpart 12.

Solicitation and all other pertinent attachments to be attached on 9 Aug 16.

IAW FAR 5.203 (a)(1), the synopsis is being posted 1 day before issuance of the solicitation.

A written solicitation is being used to facilitate proposal preparation and evaluation. The written solicitation must be downloaded from www.fbo.gov. No hard copies will be issued. On the page where the solicitation is posted is a link to a registration page if you would like to receive notices of amendments and/or addenda that may be issued to the solicitation. If you do no register, it is your responsibility to periodically review the web site for any changes to the RFQ. Contractors that are debarred, suspended or proposed for debarment are excluded from receiving contracts. Proposal prepared by debarred, suspended or otherwise ineligible contractors are at the risk and expense of the contractor. Contractors must be registered in the System for Award Management (SAM) system prior to award for solicitations issued after 31 May 1998. To register in SAM, go to https://www.sam.gov/portal/SAM/#1#1.

DESCRIPTION OF REQUIREMENT: The requirement is to procure a CNC Knee Mill Controller Kit, installation and training to four government personnel.

SITE VISIT: A site visit will not be conducted

TYPE OF SOLICITATION: Solicitation H92240-16-T-0090 is a Request for Quote (RFQ). Proposals are due 23 Aug 2016, by 2:00 PM PST.

METHOD OF EVALUATION: This acquisition will use Lowest Price technique to make a best value award decision.

QUESTIONS: All questions shall be submitted in writing by 2:00 PM PST on 16 Aug 2016, and via email to Loriell.Rumsey@socom.mil to be accepted. TELEPHONE OR FAXED INQUIRES WILL NOT BE ACCECPTED.

POINT OF CONTACT: Complete quotes are due no later than 2:00 PM PST on 23 Aug 2016. Proposals shall be sent via email to Loriell.Rumsey@socom.mil to be accepted.

All correspondence sent via e-mail shall contain a subject line that reads, H92240-16-T-0090 CNC Knee Mill Controller. E-mail filters at NAVSOC are designed to filter e-mails without subject line or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the prescribed subject line is not included, the e-mail may not get through the e-mail filters. Also .zip or .exe files are prohibited attachments and may be deleted by the e-mail filters at NAVSOC. Ensure only .pdf, .doc, or .xls documents are sent as attachments to e-mail. The e-mail filters may delete any other form of attachments.