Product_Description_CNC_Knee_Mill_Controller_2_Aug_2016.pdf

Product Description

Naval Special Warfare Command

PURCHASE OF CNC CONTROLLER FOR KNEE MILL

2 Aug 2016

1.0 OBJECTIVE: Purchase of CNC Knee Mill Controller for the U.S. Government.

1.1 Background: The purchase of the CNC Knee Mill Controller will provide the U.S.

Government the ability to cut custom brackets, tabs and clamps out of Mild Steel, Stainless Steel and Aluminum. It will also allow the fabricate of custom shims. This will allow the fabrication of custom brackets, plates and mounts for Government vehicles. The Government will then be able to customize as mission requires brackets, and mounts for lights, storage, safety etc. This will allow the ability to duplicate to more exacting tolerances with speed and quality.

2.0 DESCRIPTION OF REQUIREMENT: CNC control system with required software to run servo drive motors. System comes complete with all required motors, controllers, brackets, ballscrews and cables.

2.1 General physical description to include capabilities: Kit will consist of all required controllers, motors, brackets and servo’s to operate the Knee Mill in the X, Y and Z axis. It will also include software needed to program the machine. Brand Name or equal to Mach Motion.

2.2 Specifications and quantities:

o 160 GB hard drive o 1GB Ram o Microsoft Windows 7 Home o Mach3 CNC Program and Software License or Equivalent o Keyboard o Mouse o Switch Panel with (Jog Buttons, E-Stop, Cycle Start/Stop, Feed-rate Override, Selector Switches) o Apollo III Motion Controller or Equivalent o 6 Axis Control with Full Encoder Feedback, Spindle Control (Clockwise, Counterclockwise, and 0-10VDC Analog) with Spindle Feedback o 2 Encoder MPGs inputs o 16 Inputs & 8 Outputs o Separate Hardware and Drive Enable Circuits o Emergency Stop Circuit o Expandable I/O with the X150-03-01 Expansion Board o 17” MachMotion Ultimate touch Screen, Newfangled Mach3’s wizards, Add-ons for Mill (Conversational Programming Package) or Equivalent o 2.1.16 Hand-held Pendant with MPG & Selector Knobs x15-20-01, X15-60-01

CNC Control Mounting Arm or Equivalent o Brushless AC Servo Drive & Motor (Motor 750W 3000RPM 5/8” Shaft 30 in/lb)

(x3) o 5M Encoder Cable with Sealed Motor Connector (x3) o 5M Power Cable with Sealed Motor Connector (x3) o Control to Drive Cable with feedback Teco Digital 15ft (x3) o VFD-Single Phase, 230Volt, 3Hp Kit o Industrial Drive Enclosure (Drives Mounted and wired, 6 inputs & 4 Relay

Outputs, 24V 40W power supply, Complete Enable Circuit, Fuses and Fuse

Blocks, Door Switch safety Lockout o Filtered Cooling System, Powder Coated Enclosure, Fully Labeled with

Schematic) o Mill Servo Adapter Kit (3 Axis Servo Adapter Brackets, Quill Kit, Ball Screw

Kit, Yoke for x and y Belts and pulleys with Hardware)

2.3 Additional capabilities: N/A

3.0 DELIVERY INFORMATION.

3.1 Required delivery date: 12 September 2016

3.2 Delivery POC Name Mark Anizan

3.3 Delivery address: 1300 Helicopter Road Bldg 3854, Virginia Beach VA. 23459

3.4 Special instructions:

4.0 SECURITY: N/A

5.0 QUALITY ASSURANCE: The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms to include proper delivery of quantity and type of goods. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.