Clean room robotic arm
Closed Solicitation Posted
- Solicitation number
- RFP358156_BLN
- Agency
-
Fermi National Accelerator Laboratory
Office of Science, Department of Energy
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 335999 All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Place of performance
- Batavia, Illinois 60510, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Fermi National Accelerator Laboratory, operated by the U.S. Department of Energy, is seeking firm fixed-price quotes for the procurement of 1 clean room robotic arm. The robotic arm must meet or exceed detailed technical specifications, including requirements for control function, electrical safety, robotic safety standards, waterproof rating, and cleanroom standards. Offerors must submit the Subcontractor Annual Representations & Certifications (SARC) form and the PUR466 Proposal Certifications form with their quotes. Quotes are due by May 16, 2024 at 4:00 PM.
This solicitation does not have a set-aside designation. The place of performance is Batavia, IL 60510, USA. The resulting purchase order will be issued under the Fermi Research Alliance, L.L.C.'s (FRA) prime contract with the Department of Energy for the operation and management of the Fermi National Accelerator Laboratory. FRA has not provided any information about potential incumbents or the expected award value range.
Notice text
FERMILAB REQUESTS YOUR FIRM FIXED PRICE QUOTE FOR THE FOLLOWING:
1 EACH: CLEAN ROOM ROBOTIC ARM PER SPECIFICATIONS BELOW:
Technical Specifications - The robotic arm shall meet or exceed the requirements listed in:
Control function: Automated programming with manual override
Controller electric safety: NRTL certified
Controller input: 100-240VAC, 50/60 Hz
Robotic safety standard: ANSI/RIA R15.06
Waterproof standard: IP54
Cleanroom standard: ISO-5 or better
Controller interface: Ethernet 100 Mbit
Motion axis counts: 6
Working radius [mm]: >= 900
Payload capacity [kg]: >=16
Tool speed [m/s]: 1.0
Joint rotation range [deg]: 360
Joint rotation speed [deg/s]: >=120
Pose repeatability [mm]: +/- 0.05
Cleaning, Packaging, and Shipping
The unit shall be free from dust and grease. Each sub-assembly shall be well packaged such that they are not damaged in transit. All the components shall be prepared for shipment in accordance with commercial practice and in compliance with applicable rules and regulation pertaining to the handling, packaging, and transportation of the product to ensure carrier acceptance and safe delivery. Each component shall be individually wrapped in low density polyethylene bags.
Wooden or plastic containers that prevent impact damage and bending shall be used. Sharp fasteners that penetrate the container, such as nails or screws, shall be avoided, and in any event, provisions shall be made that inadvertent penetration of points cannot come into contact with the components. Banding shall be applied in such a way that the bands must be removed if the container is opened. A marking shall be applied to the bands that identifies the manufacturer or manufacturer’s shipping agent, so as to indicate if the bands may have been replaced (e.g. as a result of customs inspection).
SARC AND PUR466 MUST BE SUBMITTED WITH ALL PROPOSALS.
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| PIP-II ssrs and LB650 vacuum gauge and readout | Fermi National Accelerator Laboratory | No set-aside | |
| 5W Pulse Tube CryoCooler | Fermi National Accelerator Laboratory | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity