CGC pamlico (wlic 800) drydocking and repairs

The Coast Guard's Surface Forces Logistics Center (SFLC) is announcing a best value negotiated procurement for accomplishing the FY13 Drydocking and Repairs for USCGC PAMLICO (WLIC 800), a 160' inland construction tender. This procurement will be a total small business set-aside using FAR Part 12 commercial procedures in conjunction with elements from Part 15. The geographical restriction area for this requirement is no greater than 400 nautical miles from the cutter's homeport and no open water transits. CGC PAMLICO is homeported at 1790 Saturn Blvd. New Orleans, Louisiana 70129. Period of Performance will be 1/16/13 - 03/05/13. The requirement will result in award of a single firm fixed price ship repair contract. The current list of work items is as follows:

Hull Plating (Side Scan), Ultrasonic Testing
Appendages (U/W), Leak Test
Appendages (U/W) - Internal, Preserve
Propulsion Shaft Seals (Mechanical), Clean and Inspect
Propulsion Shafting; Remove, Inspect, and Reinstall
Propulsion Shafting, Straighten
Propeller Shaft Sleeve, Renew
Propulsion Shaft Bearings (External), Check Clearances
Propulsion Shaft Bearings (External), Renew
Propulsion Stern Tube Bearings, Renew
Propellers, Remove, Inspect, and Reinstall
Propeller, Perform Minor Repairs and Reconditioning
Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean
Fathometer Transducer, General Maintenance
Sea Strainers - Duplex (All Sizes), Overhaul
Rudder Assembly, Remove, Inspect and Reinstall
Rudders, Preserve "100%"
Rudder Stock Bearings, Check Clearances
Warping Capstan, Level 2 Inspect and Repair
Hull Fittings (Mooring and Towing), Inspect and Tet
Spuds, Overhaul
Spud Well(s), Preserve
U/W Body, Preserve "100%"
Stern Tube Interior Surfaces, Preserve 100%
Cathodic Protection / Zinc Anodes, Renew
Drydocking
Temporary Services, Provide
Sea Trial Performance, Provide Support
Propulsion Shafting, Strain Gage Alignment Inspections
Propulsion Stern Tube Bearings, Check Clearances
Boiler Exhaust Stack Uptakes, Commercial Clean
Spud Winch Wire Rope, Renew
Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair
Propulsion Shafting, Optical or Laser Alignment Check
Sewage Holding Tanks, Clean and Inspect
Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test
Bilges (Machinery Space) Preserve
Bilges (Non-Machinery Space) - Cargo Hold 1,2,&3 , Preserve
Stem Bulward Repair
DC Shop Deck Plating Renew
Mechancial Chain Stoppers, Overhaul
Plenum Room Deck and BHD Plating Renew
Galley Deck Plating Renew
Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Repair
Hull and Structural Plating - Pilot House Steel Plate, Repair
Spud Well Liners, Renew
Hull Plating Freeboard, Preserve - Partial
Auxiliary Sea Water System Valves, Overhaul Or Renew
Boat Davit Winch, Shrink Wrap
Buoy and Cargo Handling Crane, Shrink Wrap
Spud Overhaul Parts
Composite Labor Rate
GFP Report
Laydays

The RFP (solicitation) will be posted on or about 8/23/12.