Carbide Laser System with OPA
Open Solicitation Posted
- Solicitation number
- 368506(RE)
- Agency
-
Office of Science
Department of Energy
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334516 Analytical Laboratory Instrument Manufacturing
- Place of performance
- Menlo Park, California 94025, United States
- Points of contact
-
- Ryan Enos ryan.enos@slac.stanford.edu
Notice details come from SAM.gov. Updated .
About this opportunity
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy Office of Science, seeks proposals for a Carbide Laser System with Optical Parametric Amplifier (OPA), with full proposals due November 24, 2026 at 5:00 p.m. PST. The requirement is limited to a U.S. domestic end item source, and the Set Aside line reads No Set-Aside Used.
SLAC is a management and operating contractor, so its subcontracts are not Federal procurements and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Certain federal laws, Executive Orders, and regulations may still affect its DOE-approved purchasing system, as required by statute, regulation, or contract terms. Place of performance is Menlo Park, CA 94025.
Vendors must complete and return all documents referenced in the cover letter, addressed to Ryan Enos. The attached package, RFP_368506(RE)_Carbide_Laser_System.zip, contains the RFP preparation requirements. The procurement is classified under NAICS 334516, Analytical Laboratory Instrument Manufacturing, and PSC 5860, Stimulated Coherent Radiation Devices, Components, and Accessories. The notice was posted November 10, 2026.
Notice text
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
SLAC National Accelerator Laboratory invites interested vendors to submit a proposal in accordance with the attached RFP preparation requirements for Carbide Laser System with OPA. Your full proposal must be received no later than Tuesday, November 24, 2026, 5pm PST.
SLAC has a requirement for a U.S. domestic end item source of the following:
Attached RFP_368506(RE)_Carbide_ Laser_System
NOTE: The following documents are attached in this solicitation.
-
RFP_368506(RE)_Carbide_ Laser_System.zip
-
Must complete and return all documents mentioned in the cover letter.
-
Please provide required documentation to the attention of Ryan Enos.
Files
| File | Type | Posted |
|---|---|---|
| RFP_368506(RE)_Carbide_ Laser_System.zip | ZIP file |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Site-wide Crane Inspection & Troubleshooting Services | Office of Science | No set-aside | |
| UPDATED ALS SHB pulsed RF HPA | Department of Energy | No set-aside | |
| Large Format Wire Electrical Discharge Machining (EDM) System | Department of Energy | No set-aside | |
| Sources Sought Notice for Continuous Wave Parametric Oscillator (CW OPO) Laser System | National Institute of Standards and Technology | No set-aside | |
| X209 Laser Powder Bed Fusion (L-PBF) Machines FY27 | Department of Energy | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity