ATL Firing Range Services
Closed Solicitation Posted
- Solicitation number
- 70T05026Q6100N001
- Agency
-
Transportation Security Administration
Department of Homeland Security
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 713990 All Other Amusement and Recreation Industries
- Place of performance
- Atlanta, Georgia, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Transportation Security Administration (TSA) is soliciting quotations for the use and rental of an existing, established indoor firing range to support their firearms training operations. This Request for Quotation (RFQ), solicitation number 70T05026Q6100N001, is being conducted as a combined synopsis/solicitation for commercial items under FAR Subpart 12.6. The range must provide at least twelve simultaneous firing points, be located within 30 miles of Atlanta International Airport, and accommodate specific technical requirements including target placement distances between 1.5 and 75 feet, secure storage facilities, classroom space for 24 students, and exclusive 4-hour morning training blocks on Tuesdays and Thursdays. The government will evaluate quotations using a lowest price technically acceptable (LPTA) selection process, with award potentially made on initial quotations; therefore, offerors should submit their best technical and price terms from the outset. The deadline for quote submission has been extended to January 7, 2026 at 10:00 AM EST. All quoters must be registered in the System for Award Management (SAM) at the time of submission.
This acquisition is set aside as a Total Small Business opportunity under NAICS code 713990 (All Other Amusement and Recreation Industries) with a small business size standard of $9.0 million. The contract will be awarded as a firm fixed-price agreement for the base period of January 20, 2026 through January 19, 2027, with four one-year option periods extending through January 19, 2031, totaling five years of potential service. The TSA estimates approximately 96,000 rounds will be fired monthly across 96 days of range usage annually, based on 24 shooters firing 500 rounds each per day. The range facility must be capable of handling lead recovery and ammunition sourced from the government, with all delivery, acceptance, and FOB points established at the contractor's facility in Atlanta, Georgia. The primary contracting officer is Delisa Hawkins, and the contractor will be required to provide a Continuity of Operations (COOP) plan and support TSA operations during contingency events.
Notice text
3 versions
Update #3 · Latest ·
This Notice has been extended to January 7th at 10:00 am EST for quote submission
In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted.
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 70T05026Q6100N006. The solicitation is issued as a Request for Quotation (RFQ).
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06.
(iv) This acquisition is issued on an unrestricted basis. The associated NAICS code is 713990 with a small business size standard of $9.0 M.
(v) List of Contract Line Item Numbers (CLINs), items, quantities, and units of measure:
See Attached SF-1449
(vi) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range.
(vii) Delivery, acceptance, and FOB point are at the contractor's facility.
(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. There are no addenda to the provision.
(ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation.
The evaluation procedures to be used are as follows:
Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows:
1) Quotes may be removed from consideration for, but not limited to, the following reasons:
• Quotes that are not received timely
• Quotes that fail to follow the instructions in FAR Provision 52.212-1
• Quotes that fail to submit ALL required documentation/provisions
• Quotes that do not provide completed pricing table
• Quotes that have language inconsistent with the terms and conditions set forth in the
solicitation
2) Quotes will be ordered by price from lowest to highest.
3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters.
If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably.
4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES.
(e) Each Factor will be evaluated as follows:
Factor 1. Technical Acceptability
Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work.
Factor 2. Past Performance
Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.)
Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort
Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance.
Factor 3. Price
Price will not be rated. Price analysis will be conducted to determine reasonableness.
Submission Requirements
- Completed Pricing schedule
- Acknowledgement of Statement of Work requirements
- Most recent Lead Testing results in accordance with OSHA
- Applicable fill in clauses and provisions (in terms and conditions section)
- Subcontractor Agreement if Applicable
- Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through
(q) of this provision.
(x) This is not a rated Defense Priorities and Allocations System (DPAS) order.
(xi) All questions must be received no later than December 23, 2025 must be submitted via email to the points of contact listed at 2:00 pm (noon) Eastern Time.
(xii) For more information contact Delisa.Hawkins@tsa.dhs.gov.
Update #2 ·
In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted.
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 70T05025Q6100N006. The solicitation is issued as a Request for Quotation (RFQ).
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06.
(iv) This acquisition is issued on an unrestricted basis. The associated NAICS code is 713990 with a small business size standard of $9.0 M.
(v) List of Contract Line Item Numbers (CLINs), items, quantities, and units of measure:
See Attached SF-1449
(vi) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range.
(vii) Delivery, acceptance, and FOB point are at the contractor's facility.
(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. There are no addenda to the provision.
(ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation.
The evaluation procedures to be used are as follows:
Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows:
1) Quotes may be removed from consideration for, but not limited to, the following reasons:
• Quotes that are not received timely
• Quotes that fail to follow the instructions in FAR Provision 52.212-1
• Quotes that fail to submit ALL required documentation/provisions
• Quotes that do not provide completed pricing table
• Quotes that have language inconsistent with the terms and conditions set forth in the
solicitation
2) Quotes will be ordered by price from lowest to highest.
3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters.
If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably.
4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES.
(e) Each Factor will be evaluated as follows:
Factor 1. Technical Acceptability
Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work.
Factor 2. Past Performance
Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.)
Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort
Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance.
Factor 3. Price
Price will not be rated. Price analysis will be conducted to determine reasonableness.
Submission Requirements
- Completed Pricing schedule
- Acknowledgement of Statement of Work requirements
- Most recent Lead Testing results in accordance with OSHA
- Applicable fill in clauses and provisions (in terms and conditions section)
- Subcontractor Agreement if Applicable
- Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through
(q) of this provision.
(x) This is not a rated Defense Priorities and Allocations System (DPAS) order.
(xi) All questions must be received no later than December 23, 2025 must be submitted via email to the points of contact listed at 2:00 pm (noon) Eastern Time.
(xii) For more information contact Delisa.Hawkins@tsa.dhs.gov.
Update #1 ·
In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted.
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 70T05025Q6100N006. The solicitation is issued as a Request for Quotation (RFQ).
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06.
(iv) This acquisition is issued on an unrestricted basis. The associated NAICS code is 713990 with a small business size standard of $9.0 M.
(v) List of Contract Line Item Numbers (CLINs), items, quantities, and units of measure:
See Attached SF-1449
(vi) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range.
(vii) Delivery, acceptance, and FOB point are at the contractor's facility.
(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. There are no addenda to the provision.
(ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation.
The evaluation procedures to be used are as follows:
Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows:
1) Quotes may be removed from consideration for, but not limited to, the following reasons:
• Quotes that are not received timely
• Quotes that fail to follow the instructions in FAR Provision 52.212-1
• Quotes that fail to submit ALL required documentation/provisions
• Quotes that do not provide completed pricing table
• Quotes that have language inconsistent with the terms and conditions set forth in the
solicitation
2) Quotes will be ordered by price from lowest to highest.
3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters.
If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably.
4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES.
(e) Each Factor will be evaluated as follows:
Factor 1. Technical Acceptability
Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work.
Factor 2. Past Performance
Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.)
Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort
Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance.
Factor 3. Price
Price will not be rated. Price analysis will be conducted to determine reasonableness.
Submission Requirements
- Completed Pricing schedule
- Acknowledgement of Statement of Work requirements
- Most recent Lead Testing results in accordance with OSHA
- Applicable fill in clauses and provisions (in terms and conditions section)
- Subcontractor Agreement if Applicable
- Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through
(q) of this provision.
(x) This is not a rated Defense Priorities and Allocations System (DPAS) order.
(xi) All questions must be received no later than December 23, 2025 must be submitted via email to the points of contact listed at 2:00 pm (noon) Eastern Time.
(xii) For more information contact Delisa.Hawkins@tsa.dhs.gov.
Files
| File | Type | Posted |
|---|---|---|
| Questions and Clarifications for 70T05026Q6100N001_ATL Range.pdf | ||
| SOW_New Atlanta Range_FY26_final.pdf | ||
| 70T05026Q6100N001.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| ATL Firing Range Services | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Indoor Firing Range Cleaning | Army National Guard | No set-aside | |
| AMENDMENT 0001- FY27 42SFS CATM Range Cleaning | Air Education and Training Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity