6515--SCI Beds

Pre-Solicitation

This is a Pre-Solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. THIS PRE-SOLICITATION NOTICE IS NOT A REQUEST FOR A QUOTE (RFQ). VENDORS SHOULD NOT SUBMIT FORMAL QUOTES UNTIL THE RFQ IS POSTED ON THIS WEBSITE. This notice is not to be construed as a commitment by the Government nor will the Government pay for the information resulting from this posting.

The Department of Veterans Affairs (VA), Veterans Integrated Service Network (VISN 8), James A. Haley Veterans Hospital (JAHVH), Tampa, FL, intends to issue a Request for Quote (RFQ), brand name only specialty beds manufactured by Hill-Rom. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 339113-Surgical Appliance and Supplies Manufacturing with 750 employees.

See below specifications: Brand name only.

DELIVERABLES:

CLIN #

Product 3

Description

Quantity

0001

CNT-BASE

CENTRELLA SMART+ BED

48

0002

CNT-PAK355

CNT-PAK355 CNT-355 Bed

48

0003

CNT-NUL

CNT-NUL Nurse Call, UTV, Lighting

48

0004

CNT-5W

CNT-5W 5th Wheel Steering

48

0005

CNT-AR

CNT-AR Accessory Outlet

48

0006

CNT-PHB

CNT-PHB Patient Helper Bracket

48

0007

CNT-OSI

CNT-OSI OSI Patient Helper Sleeve

48

0008

PRO-BASE

Progressa Base Frame

32

0009

PRO-T

Advanced Microclimate Surface

32

0010

PRO-RT

PRO-RT Rotation

32

0011

PRO-PV

PRO-PV Percussion & Vibration

32

0012

PRO-CE

PRO-CE Chair Egress Position

32

0013

PRO-PMMS

PRO-PMMS Patient Migration Mgmt

32

0014

PRO-NUL

PRO-NUL Nurse Call, Univ TV & Lighting

32

0015

PRO-ID

PRO-ID Intellidrive with 6" Casters

32

0016

PRO-LH

PRO-LHV Permanent IV Pole Left Side

32

SPECIFIC NEED/SALIENT CHARACTERISTICS:

Minimum Clinical Performance Requirements:

USB Port - Conveniently charges personal devices.

Advanced Patient Pendant - Provides personalized patient comfort settings, entertainment controls, and a live nurse call button with visual confirmation of placed calls.

Device Storage Area - Holds patient's personal items, including devices and reading material.

Auto Contour Feature - Keeps patients comfortable by elevating the knees when the head is elevated.

Yourbed.Hill-Rom.com - Informs patients about the benefit of the bed to help optimize their experience.

Verbal Safety Alerts - easily understandable verbal prompts that caution caregivers and patients: "Brake not set", "Call light not connected", "Please don't get up", "Your care team has been called", "Function not available". Available in 5 different languages for multi-language speakers

Feature Labeling - Helps caregivers easily identify key features on the bed.

Safeview®+ System - Helps caregivers monitor bed safety status with easy-to-read floor visual projections.

Motion-Activated Nightlight - Illuminates the path to guide patients to and from the bed.

Advanced Slideguard® Feature - Reduces patient migration when the head-of-bed is raised.

Illumiguide Siderail Handgrip - Provides a place to grasp and enhances visibility to safely guide patients back to bed.

Enhanced 3-Mode Bed Exit - Includes silence, auto reset and visual/audible safety prompts.

Advanced Caregiver-Focused Technology Graphical Caregiver Interface (GCI)® Touchscreen - Includes flip-up panel, providing quick access to easy-to-use controls.

Auto Contour Feature keeps the patient comfortable and secure by elevating the knees when the head is elevated.

Advanced Patient Pendant-provides personalized patient comfort settings, entertainment controls, plus a live nurse call button with visual confirmation of placed calls.

Device Storage Area- holds patient's personal items, including devices and reading material

Upgradable platform with open architecture

Integrated Urinal Holders

FlexAFoot Powered Bed Extend retractable foot mechanism

Brake Not Set Alarm

One Button Chair

Battery Backup

Digital Angle Indicator

Built-inin Line and Cord Management

Drainage Bag Holder

Smart Bed Ready (Integrated Early Sense (contact-free continuous monitoring)

Wi-Fi

Enhanced 3-Mode Bed Exit

Motion Activated Nightlight

Stand Assist

Advanced Slideguard® Feature

Foley Position Limit

Dampened Emergency CPR

Integrated Early Sense (contact-free continuous monitoring)

Trapeze bracket/sleeve centered on the frame of the bed

Pumps and blowers integrated into the frame

Mattress

Targeted Pressure Redistribution-Up to 21% less peak sacral pressure

Best in Class Comfort- Rated 5X more comfortable

Integrated Early Sense (contact free continuous monitoring)

Source Considerations:

Battery Backup

Voltage 120V

Biomedical Tech Considerations:

- Provides operator Manuals Service Manuals and onsite clinical training on the operation of the bed

-Troubleshooting for Biomed at no additional charge and offers specific OME certification with an additional charge

The local service center is within 10 miles of the facility

- One-year manufacturer s warranty provided

- 24/7 service and support

1) Essential/significant physical, functional, or performance characteristics. Salient features have been identified by clinical and technical staff to provide the most appropriate replacement to ensure the best possible patient care. The features below delineate the goals of fall prevention, pressure injury reduction, improved communication, and automatic incontinence detection.

Salient Features:

Overall width 40" or less

Early Sense

Bed Height minimum 14.5 or lower

Safe Working Load at least 650 lb (295 kg)

Patient weight range 70 - 500 lb. (32 - 227 kg) or more

3-mode bed exit with audible alerts

Motion-activated nightlight

One-button patient stand assist

Technology to reduce patient sliding while raising the head of the bed

Foley position limit to ensure Foley bag does not rest on the floor and spill

Patient head of bed angle display

Trendelenburg/reverse Trendelenburg

Emergency CPR mode for emergencies

Device storage area

Integrated urinal holders

Extendable bed length

Touchscreen interface

Bed exit silence

Brake-not-set alert

One button chair

Scale

Battery backup

Four corner brake and steer

Line and cord Management

Four IV pole sockets

Integrated restraint holders

Lockout controls

Head-end traction

Drainage bag holder

USB Port for charging personal devices.

Patient Pendant with controls for patient comfort settings, entertainment controls, nurse call button with visual confirmation of placed calls, as well as a holder for patient devices.

Audible safety alerts to prompt staff and patients

Integrated Early Sense (contact-free continuous monitoring)

Integrated incontinence detection to alert staff of an incontinence event

Visual indicators for bed status, incontinence, and alarm settings that can be viewed from the patient room doorway

Motion-Activated Nightlight

The trapezeze on the bed needs to have the capability to be adjusted to the sides and middle of the bed for ease of use for patients

Illuminated side rail grip

Magnetic or wireless nurse call cable to eliminate cable breaking

Integrated and quiet air pump for low air loss mattress

Earlysense (Ability to monitor heart rate, respiration, effective turning and repositioning, and trends from within the mattress)

Advanced Low air loss mattress

Turn Assist

Moisture and heat reduction

Weight-based pressure redistribution

Side sitting stability detection

Delivery specifications:

1. Period of Performance/Delivery Date: The period of performance is from 06/04/2024- 09/30/2024. Delivery and installation shall be completed no later than 09/30/2024. Late delivery will not be accepted.

2. Address 13000 Bruce B. Downs Blvd, Bldg. 38, Tampa, FL 33612, between 8 am to 4:30 pm. Delivery during the Holiday will not be accepted.

3. Delivery trucks will not be permitted to remain at the loading dock. Trucks shall be unloaded, moved from the dock, and then brought back to the dock if required to haul out any waste, tools, or excess materials. Builds will be delivered to an identified staging area in Spinal Cord Injury.

4. Destination: Beds will be delivered to the staging area in the Spinal Cord Injury Department for pick up by nursing staff to take to the room. A spreadsheet will identify what bed with an EE number is going within each room.

E. Warranty: The contractor is responsible for picking up the defective beds and replacing them with new ones.

F. Training: The vendor shall coordinate through the VA POC to provide a hands-on training session to staff selected by the VA (up to 15). Training shall be completed within 2 days after the final installation of equipment. The vendor shall record the training and provide an electronic copy of the training to the VA POC for the VA to use to train additional personnel at a future date. In addition, the vendor shall provide additional training documents to the VA POC for training additional persons at a future date.

G. Installation:

1. The vendor is required to manage and coordinate installation at the JAHVH with the VA POC.

2. On-site assembly and installation of items, and performance of services identified in this document shall take place during normal business hours which are defined as 0800 to 1630 (i.e.: 8:00 am to 4:30 pm Eastern Standard Time), Monday through Friday, and excluding Federal Holidays. Delivery and installation will take place at 13000 Bruce B. Downs Blvd, Tampa, FL 33612 Spinal Cord Injury Department.

3. During the entire duration of assembly and installation, the vendor shall have a competent representative on-site as the vendor s contact, and to serve as the interface between the vendor and James A. Haley VA Hospital.

4. On-site representative can be the installer. All instructions provided by the VA point of contact to the representative will be binding as if given to the vendor s main contact. The VA point of contact may provide specific instructions, however, only the Contracting Officer may change the terms or conditions of the contract.

H. Contractor Responsibility/Compliance:

1. The Contractor is 100% responsible for compliance with all Veterans Administration (VA), local, state, and federal environmental/occupational safety laws, rules and regulations safety requirements.

2. The contractor must follow life safety codes and take necessary actions to avoid conditions that may be hazardous to the health and safety of hospital personnel and patients.

3. The contractor is responsible for meeting all applicable OSHA and VA guidelines for safe working processes.

4. The Contractor shall unload the equipment from the truck and deliver to specific areas designated by VA s point of contact upon being received at the facility warehouse (supply chain management).

5. Uncrating/unboxing the equipment shall be coordinated with POC at the specific location.

6. The removal of waste and/or excess material shall be conducted through the loading dock at the facility warehouse. It is the contractor s responsibility to dispose of used crates or boxes and clean up areas.

7. There is no area or dumpster available for the disposal of waste and materials.

8. Any damage to walls/floors upon delivery of equipment shall be repaired and returned to its original condition at no charge to the government.

9. The contractor shall communicate through the VA POC any required coordination requirements.

I. Contractor Employee Identification:

1. contractor employees must be clearly identified as contractors (not VA employees) when performing services under this contract. This includes visual (appearance), verbal (phone), and electronic (email).

2. The contractor must provide all employees with a contractor identification (ID) badge at the contractor s expense before performing work under this contract.

3. Contractor employees are required to display this badge at all times when performing services under this contract.

4. Employees released from service by the contractor must have their badge collected by the contractor.

5. All badges must contain an expiration date and a photograph of the employee.

6. All contractor employees must also be required to wear VA-issued badges and must display these badges at all times while in the performance of this contract and/or as instructed by the VA point of contact.

7. The contractor supervisor must ensure that all contractor employees display their VA-issued badges.

8. The contractor supervisor must be responsible for managing all VA-issued badges provided to contractor employees and immediately collect these badges from employees no longer working on the contract.

J. Contractor Employee Conduct:

1. The contractor is completely responsible for all actions and conduct of their employees.

2. Contractor employees must be well-groomed and neat in appearance.

3. Contract employees must be professional in attire and must not wear any offensive clothing.

4. Contractor employees must conduct themselves in a socially acceptable manner appropriate for an office work environment.

5. Loudness, vulgarity, rudeness, or other similar offensive conduct by a contractor employee may be grounds for denying the employee further access to VA premises.

6. Contractor employees must not consume alcohol or illegal drugs during working hours or at any other time the employees are performing work under this contract.

The actual Solicitation #36C24824Q1098 is anticipated to be posted to the Beta.SAM.gov website on or about 5/23/2024, closing date of 05/30/2024 @10am EST. Quoters should continue to monitor Beta.SAM.gov for the RFQ and any subsequent Amendments to that RFQ. All Quoters must be registered in the System for Award Management (SAM) database; see https://www.sam.gov for complete online Reps and Certs. SDVOSBs must be certified and verified in VetCert.

The point of contact is Leonora Simmons, Contract Specialist, email: leonora.simmons@va.gov