5. 4. 3 Battlespace Modeling and Simulation
Closed Solicitation Posted
- Solicitation number
- N00421-18-R-0034
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- PSC
- Not on record
- Place of performance
- Patuxent River, Maryland 20670, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This draft solicitation seeks engineering and technical support services for the Naval Air Systems Command Naval Air Warfare Center 5.4.3 Integrated Battlespace Simulation and Test Simulation Division. The services include maintaining simulation models and software applications that support products like the Next Generation Threat System synthetic environment generator, Architecture Management Integration Environment, and Joint Integrated Mission Model. These products are used for requirements analysis, testing, training, and research across the DoD and for foreign military sales. Offerors must demonstrate relevant past performance, and proposals will be evaluated based on technical approach, past performance, and price. Questions on the draft RFP were due by September 28, 2018, with final release anticipated in the first quarter of fiscal year 2019.
The set-aside designation is for total small business. The primary NAICS code is 541715 and PSC code R425. Engineering and technical support services are currently provided by the incumbent under contract number N00421-17-D-0016. The period of performance is expected to be five years, with all work to take place at the Naval Air Warfare Center in Patuxent River, Maryland. Offerors must also address labor categories and rates using the templates provided to facilitate evaluation.
Notice text
5 versions
Update #5 · Latest ·
Update 16 November 2018
This modification is to provide Question & Responses as well as attach a conform copy of Solicitation Amendment 0002 which updates the following:
1) Section A:
- Remove SCA information #8 changed to reserved
2) Section C:
- Paragraph 3.4.1.4 - Correct Professional LCAT degree for Software Quality Assurance Analyst Tester
3) Section J:
- Update Attachment P6 - CLIN Breakout sheet to P6 dated 16 Nov 2018
- Remove Attachment J6 - Wage Determination
4) Section L:
- Paragraph 3.0 table renumbered to 1.1.1, 1.1.2, and 1.1.3
- Paragraph 3.5.1 update ODCs chart to breakout Material and Travel
- Paragraph 3.5.2 clarification ofLabor Hours
5) Adds Block 9 RFP due date and time - 06 December 2018 by 2:00PM Eastern
Standard Time.
Potential offerors are to utilize the most current amendment to this RFP notice. It is the responsibility of potential Offerors to monitor Federal Business Opportunities website located at http://www.fbo.gov for the release of any follow-on information and/or amendments to the RFP.
*********************************************************************
Update 1 November 2018
This modification is to attach a conform copy of Solicitation Amendment 0001 which updates the following:
1) Section C - Labor Category functional descriptions
2) Adds Block 9 RFP due date and time - 30 November 2018 by 2:00PM Eastern
Standard Time.
Potential offerors are to utilize the most current amendment to this RFP notice. It is the responsibility of potential Offerors to monitor Federal Business Opportunities website located at http://www.fbo.gov for the release of any follow-on information and/or amendments to the RFP.
*********************************************************************
Update 31 October 2018
**THIS IS A REQUEST FOR PROPOSALS**
The Naval Air Warfare Center, Aircraft Division (NAWC-AD), Patuxent, MD is hereby releasing request for proposal (RFP) N00421-18-R-0034 for engineering and support services for the Integrated Battlespace Simulation and Test Division (AIR 5.4.3). This is a small business set-aside competition under North American Industry Classification Systems (NAICS) code 541715 with a size standard of 1,500 employees. The Product Service Code (PSC) is AC14. This requirement will be awarded as a single award indefinite delivery indefinite quantity (IDIQ) contract. Since this requirement is a 100% small business set-aside, only small businesses will be considered for award. Please refer to the attached files for additional details and proposal submission requirements.
The requirement for these services is currently being performed under Task Order N00421-17-D-0016 awarded to J.F. Taylor. The NAVAIR Freedom of Information Act (FOIA) website is http://foia.navair.navy.mil.
The proposal submission deadline is no later than Friday, 30 November 2018 at 14:00 EST.
Interested parties are to address questions regarding this RFP to Ms. Travora Levasseur at Travora.Levasseur@navy.mil and Mr. Christopher Pennini at Christopher.Pennini@navy.mil. The Government intends to publicize any questions received by industry in response to this RFP, along with the Governments answers. If your response includes information that you consider proprietary, please mark the information in accordance with regulatory guidance. Please do not send marketing type information or company brochures.
NOTE: There is no commitments by the Government to make an award or to be responsible for any monies expended by any interested parties in support of the effort mentioned above. Information provided herein is subject to change and in no way binds the Government to award a contract. Any amendments (if any) to this RFP will be provided as an amendment to this notice. It is the responsibility of potential Offerors to monitor the Federal Business Opportunities website located at http://www.fbo.gov for the release on any follow-on information and/or amendments to the RFP.
*********************************************************************
Update 19 October 2018
The Government would like to thank everyone that commented on the DRAFT RFP for the 5.4.3 Battlespace Modeling and Simulation (BM & S) effort, which provides engineering, and technical support services to the Integrated Battlespace, Simulation and Test Division.
A review of all questions and comments has been posted. Please continue to monitor FBO for the release of information regarding the BM & S procurement.
*********************************************************************
NOTE: The purpose of the DRAFT RFP is to allow industry the opportunity to ask questions and submit comments. All questions and comments shall be submitted via email to Travora Levasseur at Travora.Levasseur@navy.mil AND Christopher Pennini at Chrisopher.Pennini@navy.mil. The Government WILL NOT accept questions by phone or in person. All questions and comments will be posted in a single document to FedBizOps.
The attached DRAFT RFP describes engineering and technical support services required for the 5.4.3 Integrated Battlespace Simulation and Test, Simulation Division (SD), which provides full spectrum engineering, technical, and support services for Battlespace simulation and distributed simulation.
The NAWCAD 5.4.3 IBST, Simulation Division's responsibility includes providing simulation products for requirements analysis, test and evaluation, and training applications across DoD and Foreign Military Sales (FMS) customers.
The principal Battlespace simulation product developed and maintained by the Simulation Division is the Next Generation Threat System (NGTS). NGTS is a synthetic environment generator used to support training, testing, analysis, and research and development. NGTS models threat and friendly aircraft, ground and surface platforms, and their corresponding weapons and subsystems. NGTS is currently installed in multiple DoD training systems, distributed exercise centers, as well as international military training environments. Other distributed simulation products include the Architecture Management Integration Environment (AMIE), and the Joint Integrated Mission Model (JIMM). Support is also provided for standard protocols enabling battlespace simulation that include Distributed Interactive Simulation (DIS), High Level Architecture (HLA), and the Test and Training Enabling Architecture (TENA).
It is anticipated that the final RFP will be released towards the beginning of 1st QTR FY 19.
.
Update #4 ·
Update 1 November 2018
This modification is to attach a conform copy of Solicitation Amendment 0001 which updates the following:
1) Section C - Labor Category functional descriptions
2) Adds Block 9 RFP due date and time - 30 November 2018 by 2:00PM Eastern
Standard Time.
Potential offerors are to utilize the most current amendment to this RFP notice. It is the responsibility of potential Offerors to monitor Federal Business Opportunities website located at http://www.fbo.gov for the release of any follow-on information and/or amendments to the RFP.
*********************************************************************
Update 31 October 2018
**THIS IS A REQUEST FOR PROPOSALS**
The Naval Air Warfare Center, Aircraft Division (NAWC-AD), Patuxent, MD is hereby releasing request for proposal (RFP) N00421-18-R-0034 for engineering and support services for the Integrated Battlespace Simulation and Test Division (AIR 5.4.3). This is a small business set-aside competition under North American Industry Classification Systems (NAICS) code 541715 with a size standard of 1,500 employees. The Product Service Code (PSC) is AC14. This requirement will be awarded as a single award indefinite delivery indefinite quantity (IDIQ) contract. Since this requirement is a 100% small business set-aside, only small businesses will be considered for award. Please refer to the attached files for additional details and proposal submission requirements.
The requirement for these services is currently being performed under Task Order N00421-17-D-0016 awarded to J.F. Taylor. The NAVAIR Freedom of Information Act (FOIA) website is http://foia.navair.navy.mil.
The proposal submission deadline is no later than Friday, 30 November 2018 at 14:00 EST.
Interested parties are to address questions regarding this RFP to Ms. Travora Levasseur at Travora.Levasseur@navy.mil and Mr. Christopher Pennini at Christopher.Pennini@navy.mil. The Government intends to publicize any questions received by industry in response to this RFP, along with the Governments answers. If your response includes information that you consider proprietary, please mark the information in accordance with regulatory guidance. Please do not send marketing type information or company brochures.
NOTE: There is no commitments by the Government to make an award or to be responsible for any monies expended by any interested parties in support of the effort mentioned above. Information provided herein is subject to change and in no way binds the Government to award a contract. Any amendments (if any) to this RFP will be provided as an amendment to this notice. It is the responsibility of potential Offerors to monitor the Federal Business Opportunities website located at http://www.fbo.gov for the release on any follow-on information and/or amendments to the RFP.
*********************************************************************
Update 19 October 2018
The Government would like to thank everyone that commented on the DRAFT RFP for the 5.4.3 Battlespace Modeling and Simulation (BM & S) effort, which provides engineering, and technical support services to the Integrated Battlespace, Simulation and Test Division.
A review of all questions and comments has been posted. Please continue to monitor FBO for the release of information regarding the BM & S procurement.
*********************************************************************
NOTE: The purpose of the DRAFT RFP is to allow industry the opportunity to ask questions and submit comments. All questions and comments shall be submitted via email to Travora Levasseur at Travora.Levasseur@navy.mil AND Christopher Pennini at Chrisopher.Pennini@navy.mil. The Government WILL NOT accept questions by phone or in person. All questions and comments will be posted in a single document to FedBizOps.
The attached DRAFT RFP describes engineering and technical support services required for the 5.4.3 Integrated Battlespace Simulation and Test, Simulation Division (SD), which provides full spectrum engineering, technical, and support services for Battlespace simulation and distributed simulation.
The NAWCAD 5.4.3 IBST, Simulation Division's responsibility includes providing simulation products for requirements analysis, test and evaluation, and training applications across DoD and Foreign Military Sales (FMS) customers.
The principal Battlespace simulation product developed and maintained by the Simulation Division is the Next Generation Threat System (NGTS). NGTS is a synthetic environment generator used to support training, testing, analysis, and research and development. NGTS models threat and friendly aircraft, ground and surface platforms, and their corresponding weapons and subsystems. NGTS is currently installed in multiple DoD training systems, distributed exercise centers, as well as international military training environments. Other distributed simulation products include the Architecture Management Integration Environment (AMIE), and the Joint Integrated Mission Model (JIMM). Support is also provided for standard protocols enabling battlespace simulation that include Distributed Interactive Simulation (DIS), High Level Architecture (HLA), and the Test and Training Enabling Architecture (TENA).
It is anticipated that the final RFP will be released towards the beginning of 1st QTR FY 19.
.
Update #3 ·
Update 31 October 2018
**THIS IS A REQUEST FOR PROPOSALS**
The Naval Air Warfare Center, Aircraft Division (NAWC-AD), Patuxent, MD is hereby releasing request for proposal (RFP) N00421-18-R-0034 for engineering and support services for the Integrated Battlespace Simulation and Test Division (AIR 5.4.3). This is a small business set-aside competition under North American Industry Classification Systems (NAICS) code 541715 with a size standard of 1,500 employees. The Product Service Code (PSC) is AC14. This requirement will be awarded as a single award indefinite delivery indefinite quantity (IDIQ) contract. Since this requirement is a 100% small business set-aside, only small businesses will be considered for award. Please refer to the attached files for additional details and proposal submission requirements.
The requirement for these services is currently being performed under Task Order N00421-17-D-0016 awarded to J.F. Taylor. The NAVAIR Freedom of Information Act (FOIA) website is http://foia.navair.navy.mil.
The proposal submission deadline is no later than Friday, 30 November 2018 at 14:00 EST.
Interested parties are to address questions regarding this RFP to Ms. Travora Levasseur at Travora.Levasseur@navy.mil and Mr. Christopher Pennini at Christopher.Pennini@navy.mil. The Government intends to publicize any questions received by industry in response to this RFP, along with the Governments answers. If your response includes information that you consider proprietary, please mark the information in accordance with regulatory guidance. Please do not send marketing type information or company brochures.
NOTE: There is no commitments by the Government to make an award or to be responsible for any monies expended by any interested parties in support of the effort mentioned above. Information provided herein is subject to change and in no way binds the Government to award a contract. Any amendments (if any) to this RFP will be provided as an amendment to this notice. It is the responsibility of potential Offerors to monitor the Federal Business Opportunities website located at http://www.fbo.gov for the release on any follow-on information and/or amendments to the RFP.
*********************************************************************
Update 19 October 2018
The Government would like to thank everyone that commented on the DRAFT RFP for the 5.4.3 Battlespace Modeling and Simulation (BM & S) effort, which provides engineering, and technical support services to the Integrated Battlespace, Simulation and Test Division.
A review of all questions and comments has been posted. Please continue to monitor FBO for the release of information regarding the BM & S procurement.
*********************************************************************
NOTE: The purpose of the DRAFT RFP is to allow industry the opportunity to ask questions and submit comments. All questions and comments shall be submitted via email to Travora Levasseur at Travora.Levasseur@navy.mil AND Christopher Pennini at Chrisopher.Pennini@navy.mil. The Government WILL NOT accept questions by phone or in person. All questions and comments will be posted in a single document to FedBizOps.
The attached DRAFT RFP describes engineering and technical support services required for the 5.4.3 Integrated Battlespace Simulation and Test, Simulation Division (SD), which provides full spectrum engineering, technical, and support services for Battlespace simulation and distributed simulation.
The NAWCAD 5.4.3 IBST, Simulation Division's responsibility includes providing simulation products for requirements analysis, test and evaluation, and training applications across DoD and Foreign Military Sales (FMS) customers.
The principal Battlespace simulation product developed and maintained by the Simulation Division is the Next Generation Threat System (NGTS). NGTS is a synthetic environment generator used to support training, testing, analysis, and research and development. NGTS models threat and friendly aircraft, ground and surface platforms, and their corresponding weapons and subsystems. NGTS is currently installed in multiple DoD training systems, distributed exercise centers, as well as international military training environments. Other distributed simulation products include the Architecture Management Integration Environment (AMIE), and the Joint Integrated Mission Model (JIMM). Support is also provided for standard protocols enabling battlespace simulation that include Distributed Interactive Simulation (DIS), High Level Architecture (HLA), and the Test and Training Enabling Architecture (TENA).
It is anticipated that the final RFP will be released towards the beginning of 1st QTR FY 19.
.
Update #2 ·
Update 19 October 2018
The Government would like to thank everyone that commented on the DRAFT RFP for the 5.4.3 Battlespace Modeling and Simulation (BM & S) effort, which provides engineering, and technical support services to the Integrated Battlespace, Simulation and Test Division.
A review of all questions and comments has been posted. Please continue to monitor FBO for the release of information regarding the BM & S procurement.
*********************************************************************
NOTE: The purpose of the DRAFT RFP is to allow industry the opportunity to ask questions and submit comments. All questions and comments shall be submitted via email to Travora Levasseur at Travora.Levasseur@navy.mil AND Christopher Pennini at Chrisopher.Pennini@navy.mil. The Government WILL NOT accept questions by phone or in person. All questions and comments will be posted in a single document to FedBizOps.
The attached DRAFT RFP describes engineering and technical support services required for the 5.4.3 Integrated Battlespace Simulation and Test, Simulation Division (SD), which provides full spectrum engineering, technical, and support services for Battlespace simulation and distributed simulation.
The NAWCAD 5.4.3 IBST, Simulation Division's responsibility includes providing simulation products for requirements analysis, test and evaluation, and training applications across DoD and Foreign Military Sales (FMS) customers.
The principal Battlespace simulation product developed and maintained by the Simulation Division is the Next Generation Threat System (NGTS). NGTS is a synthetic environment generator used to support training, testing, analysis, and research and development. NGTS models threat and friendly aircraft, ground and surface platforms, and their corresponding weapons and subsystems. NGTS is currently installed in multiple DoD training systems, distributed exercise centers, as well as international military training environments. Other distributed simulation products include the Architecture Management Integration Environment (AMIE), and the Joint Integrated Mission Model (JIMM). Support is also provided for standard protocols enabling battlespace simulation that include Distributed Interactive Simulation (DIS), High Level Architecture (HLA), and the Test and Training Enabling Architecture (TENA).
It is anticipated that the final RFP will be released towards the beginning of 1st QTR FY 19.
.
Update #1 ·
NOTE: The purpose of the DRAFT RFP is to allow industry the opportunity to ask questions and submit comments. All questions and comments shall be submitted via email to Travora Levasseur at Travora.Levasseur@navy.mil AND Christopher Pennini at Chrisopher.Pennini@navy.mil. The Government WILL NOT accept questions by phone or in person. All questions and comments will be posted in a single document to FedBizOps.
The attached DRAFT RFP describes engineering and technical support services required for the 5.4.3 Integrated Battlespace Simulation and Test, Simulation Division (SD), which provides full spectrum engineering, technical, and support services for Battlespace simulation and distributed simulation.
The NAWCAD 5.4.3 IBST, Simulation Division's responsibility includes providing simulation products for requirements analysis, test and evaluation, and training applications across DoD and Foreign Military Sales (FMS) customers.
The principal Battlespace simulation product developed and maintained by the Simulation Division is the Next Generation Threat System (NGTS). NGTS is a synthetic environment generator used to support training, testing, analysis, and research and development. NGTS models threat and friendly aircraft, ground and surface platforms, and their corresponding weapons and subsystems. NGTS is currently installed in multiple DoD training systems, distributed exercise centers, as well as international military training environments. Other distributed simulation products include the Architecture Management Integration Environment (AMIE), and the Joint Integrated Mission Model (JIMM). Support is also provided for standard protocols enabling battlespace simulation that include Distributed Interactive Simulation (DIS), High Level Architecture (HLA), and the Test and Training Enabling Architecture (TENA).
It is anticipated that the final RFP will be released towards the beginning of 1st QTR FY 19.
.
Files
Show all 33
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| RFP for Advanced Signatures Technologies (AST) | Naval Sea Systems Command | Total Small Business | |
| NAWCAD (WOLF) Airborne Systems Integration (ASI ) Division Technical/Project Management Support (TPMS) | Naval Air Systems Command | Total Small Business | |
| Advance Notice DRAFT RFP N0016426R3007 NON-PERSONAL ACQUISITION ENGINEERING, PRODUCT SUPPORT AND LOGISTICS (PSL) SUPPORT TO THE MARITIME ELECTROMAGNETIC WARFARE DIVISION- PSC R706 - NAICS 541330 | Naval Sea Systems Command | Service-Disabled Veteran-Owned Small Business | |
| Synthetic Signature Generation (SSG) Support Services | Naval Sea Systems Command | No set-aside | |
| Draft RFP for DRPM RAS ME RAS 1. 0 and MCM RAS 2. 0 Professional Support Services | Naval Sea Systems Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity