Wireless Mic Receiver Specs item 7.pdf

Wireless Mic Receiver Specs

Model: Lectrosonics SR5c5P-B1

Lectrosonics SRc5P Specs Operating Frequencies B1: 537.600 to 614.375 MHz Frequency Selection Steps Selectable; 100 or 25 kHz Type of Receiver Dual conversion, superheterodyne IF Frequency Ch.1: 248.450 MHz and 350.000 kHz Ch.2: 243.950 MHz and 250.000 kHz Frequency Stability ±0.001 % Front End Bandwidth 20 MHz @ -3 dB Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm), A-weighted 60 dB Quieting: 2.2 uV (-100 dBm), A-weighted Squelch Quieting Greater than 100 dB typical AM Rejection Greater than 60 dB, 4 uV to 1 V Modulation Acceptance 85 kHz Image and Spurious Rejection 85 dB Third Order Intercept 0 dBm Diversity Method SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel FM Detector Digital Pulse Counting Detector operating at 250 and 350 kHz RF Spectrum Analyzer Coarse and fine scanning modes for RF spectrum site survey Antenna Inputs 50 Ohms SMA female connectors Audio Output Connectors Interchangeable D-connector adapters for camera-slot interfaces Dual TA3 male (mini XLR) balanced output adapter Balanced output adapter with fixed cables Front-panel TA5M with two balanced outputs (5P version) Audio Output Level Adjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower Audio Channel Crosstalk -80 dB or better Front Panel Controls and Indicators Sealed panel with membrane switches LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level Audio Test Tone 1 kHz, -50 dBu to +5 dBu output (bal); 1% THD Transmitter Battery Type Selection 9 V alkaline, 9 V lithium, AA alkaline, AA lithium, NiMH Phase Invert Audio output phase normal or inverted Compatibility Modes HYB native Digital Hybrid mode M.3 non-Lectrosonics (call factory) 200 Lectrosonics 200 Series 100 Lectrosonics 100 Series HYB/TB Digital Hybrid w/ Talkback M.7 non-Lectrosonics (call factory) M.6 non-Lectrosonics (call factory) IFB Lectrosonics IFB SmartNR (Noise Reduction) Off, Norman, Full modes (available in Digital Hybrid mode only) Audio Performance (Overall System) Frequency Response 32 Hz to 20 kHz (+/- 1 dB) THD 0.15% (system) typical in Digital Hybrid mode Input Dynamic Range 125 dB (with full Tx limiting) Rear Panel Controls Audio output connectors External DC input Powering and Current Consumption Min. 7 V to max. 18 VDC; 2.2 W

125 mA at 18 VDC 180 mA at 12 VDC 295 mA at 7 VDC Runtime with SRBATTSLED Adapter 7.2 V, 2200 mAh "L" style battery will typically provide about 11 hours of operation Transmitter Battery Level Tracking: LCD display with battery icon or timer readout Operating Temperature -4 to 122°F (-20 to +50°C) Dimensions (W x H x D) 2.68 x 0.72 x 3.52" (68 x 18 x 89 mm) Weight 7 oz (195 g) Packaging Info Package Weight 1.05 lb Box Dimensions (LxWxH) 9.8 x 7.8 x 2.9"