Waianae Jap Cemetery Perimeter Fencing IFB.pdf
PDF 115 KB Posted
- Attached to
- Waianae Japanese Cemetery Perimeter Fencing
- Solicitation number
- B26002144
- Issued by
- Honolulu County, Waipio Acres CDP, Hawaii
About this file
This is a Specifications and Scope of Work document issued by the State of Hawaii Department of Accounting and General Services (DAGS) Central Services Cemetery Management Office for an Invitation for Bid (IFB) to install perimeter chain link fencing and gates at the Waianae Japanese Cemetery. The project involves installing 6-foot-high commercial-grade galvanized steel chain link fencing with 2-inch diamond mesh pattern and 9-14 inch barbed or razor wire extensions around the entire cemetery perimeter, including the pathway from Waianae Valley Road. A double-leaf swing gate with reinforced steel tubing and heavy-duty hardware will be installed at the sidewalk entrance on Waianae Valley Road. The specifications require Schedule 40 steel line posts spaced 10 feet apart with concrete footings at minimum 30-inch depth, galvanized ties at 12-inch intervals, and compliance with ASTM F567 and local building codes. All work must adhere to Federal, State, and County regulations as detailed in Special Provisions CSD 26-026.
The contractor must provide safety signs and barricades to protect public traffic and rights-of-way during construction. No vehicles are permitted on cemetery grounds unless authorized by the Contract Administrator. The document does not specify pricing terms, contract award dates, response deadlines, bid opening dates, site visit requirements, or pre-bid meetings. No information regarding funding sources, contract term, renewal options, set-asides, or incumbent contractor details is provided in the specifications.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATIONS Page 1 of 2 CSD-26-026-O
SPECIFICATIONS
SCOPE OF WORK
The State of Hawaii DAGS Central Services Cemetery Management Office is opening an invitation for bid (IFB) to install perimeter chain link fencing and gates at the Waianae Japanese Cemetery
TMK 8-5-01:02.
GENERAL
1) All work shall be performed in accordance with applicable Federal, State, and County rules and regulations. The contractor shall review and comply with all requirements defined in Special Provisions CSD 26-026.
2) The recipient shall perform all work to meet ASTM F567 and local building codes.
a) Fencing materials will consist of:
• Type: Commercial-grade galvanized steel chain link and steel components
• Mesh Size: 2-inch diamond pattern.
• Wire Gauge: Minimum 9-gauge for durability.
• Coating: Galvanized or vinyl-coated for corrosion resistance.
b) Posts and framework will consist of:
• Line Posts: Schedule 40 steel spaced 10 feet apart.
• Terminal Posts: At corners, ends, and gate openings; heavier gauge.
• Top Rail: Securely fastened steel pipe.
c) Height and dimensions:
• Fence Height: Minimum height of 6 feet for perimeter security.
• 9-14” protrusions with barbed/razor wire extending above the top of fencing
• Clearance: Bottom of fence no more than 2 inches above grade.
d) Gate specifications:
• Type: Swing gate, double leaf for vehicle access.
• Hardware: Heavy-duty hinges, latch, and padlock provision.
• Gate Frame: Reinforced steel tubing.
e) Installation:
• Post Setting: Concrete footings, minimum depth 30 inches.
• High tensile strength reinforced throughout fencing.
• Fabric Attachment: Tied with galvanized ties every 12 inches.
3) No vehicles will be allowed on cemetery grounds unless authorized by the Contract Administrator or designated representative.
SPECIFICATIONS Page 2 of 2 CSD-26-026-O
4) The Contractor shall provide safety signs and other barricades and devices necessary for the safety and convenience of the public. The Contractor shall always conduct work to assure the least possible obstruction of public traffic without obstructing the free flow of traffic and public rights-of-ways.
FENCING PREREQUISITES FOR WAIANAE JAPANESE CEMETERY
1) Install 6’ high tensile strength chain link fencing with barbed/razor wire extensions along the entire perimeter of the Waianae Cemetery including the pathway leading up from Waianae Valley Rd.
2) Install 6’ H double entry high tensile strength chain link gate with barbed/razor wire extensions at the sidewalk at Waianae Valley Rd.
| SPECIFICATIONS |
| SCOPE OF WORK |
| GENERAL |
| FENCING PREREQUISITES FOR WAIANAE JAPANESE CEMETERY |
File details come from the government source that posted it. Updated .