W91QVN22R0009-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to incorporate the follow ing changes as described in the SF 30 Block 14 Continuation Page:

1. Change CLINs 0001, 1001, 2001, 3001, 4001, 0003, 1003, 2003, 3003, and 4003 to Requirements CLINs.

2. Delete the follow ing CLINs: 0002AA, 1002AA, 2002AA, 3002AA, 4002AA, 0004, 1004, 2004, 3004, and 4004.

3. Change CLINs 0002, 1002, 2002, 3002, and 4002 to priced CLINs w ith quantity of 60 and unit of measure JOB.

4. Delete the follow ing PWS paragraphs: 2.3.2 and 3.7.

5. Insert the follow ing PWS paragraphs: 2.4.1, 2.4.2, and 3.13.

6. Insert the follow ing clauses: 52.245-1 Alt I, 52.245-9, 252.211-7003, 252.245-7001, 252.245-7002, 252.245-7003, 252.245-7004, and 52.237-2.

7. Change the contract currency from USD to Won.

8. Open a new question period to allow questions to be submitted for tw o (2) days after this amendment is issued.

9. Extend the proposal due date from 26 May 2022 at 1:00 P.M. to 02 June 2022 at 1:00 P.M.

10. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

1 28

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 18-May-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W91QVN22R0009

X 9B. DATED (SEE ITEM 11)

18-Apr-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO.

5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

18-May-2022

CODE

411TH CONTRACTING SUPPORT BRIGADE, KOREA

HUMPHREYS CONTRACTING DIVISION

UNIT 15289

APO AP 96271-5584

UNITED STATES

W91QVN 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W91QVN22R0009

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been deleted:

ANSWERS TO QUESTIONS RECEIVED

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 26-May-2022 01:00 PM to 02-Jun-

2022 01:00 PM.

The currency type for this contract has changed from US Dollars to Won.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The IDC type has changed from N/A to Requirements.

The CLIN extended description has changed from:

including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) Base Year: 28 JUL 2022 - 27 JUL 2023

To:

including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) Base Year: 28 JUL 2022 - 27 JUL 2023 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

The cost constraint EST has been added.

CLIN 0002

This CLIN has been renumbered to CLIN 0005.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Corrective Maintenance (CM) to DELETED.

The CLIN extended description has changed from:

in accordance with PWS para. 2.4Base Year: 28 JUL 2022 - 27 JUL 2023

DELETED

The cost constraint EST has been deleted.

SUBCLIN 0002AA

This SUBCLIN has been renumbered to SUBCLIN 0005AA.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Technician (CT) to DELETED.

The pricing detail quantity has decreased by 2,190.00 from 2,190.00 to 0.00.

The unit of issue Hours has been deleted.

The cost constraint EST has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

The NAICS code 517311 has been deleted.

The MDAP/MAIS Code 000 has been deleted.

CLIN 0003

in accordance with PWS para. 2.5. Base Year: 28 JUL 2022 - 27 JUL 2023 in accordance with PWS para. 2.5. Base Year: 28 JUL 2022 - 27 JUL 2023 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 0004

This CLIN has been renumbered to CLIN 0006.

The IDC type has changed from Requirements to N/A.

The CLIN type priced has been deleted.

The CLIN description has changed from Repair/Replacement Parts to DELETED.

The CLIN extended description has changed from:

The Contractor shall provide replacement/repair parts and materials that require labor, equipment, and transportation in accordance with paragraph 2.6 of the PWS on an as needed basis. All items under under this CLIN shall be Brand Name or Equal. The Contractor shall provide the prices for the listed items in Appendix B with the price proposal.

This CLIN has a Not to Exceed amount of KRW 16,062,042.Base Year: 28 JUL 2022 - 27 JUL 2023

The pricing detail quantity 32.00 has been deleted.

The unit of issue Each has been deleted.

The cost constraint NTE has been deleted.

The FOB Destination has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

The WSC Equipment code 000 has been deleted.

CLIN 0005

This CLIN has been renumbered to CLIN 0004.

CLIN 1001

The CLIN extended description has changed from:

including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) Base Year: 28 JUL 2023 - 27 JUL 2024 including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) Base Year: 28 JUL 2023 - 27 JUL 2024 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 1002

This CLIN has been renumbered to CLIN 1005.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Corrective Maintenance (CM) to DELETED.

in accordance with PWS para. 2.41st Option Year: 28 JUL 2023 - 27 JUL 2024

The option status has changed from Option to No Status.

SUBCLIN 1002AA

This SUBCLIN has been renumbered to SUBCLIN 1005AA.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Technician (CT) to DELETED.

The pricing detail quantity has decreased by 2,190.00 from 2,190.00 to 0.00.

The unit of issue Hours has been deleted.

The option status has changed from Option to No Status.

The cost constraint EST has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

CLIN 1003

in accordance with PWS para. 2.5.1st Option Year: 28 JUL 2023 - 27 JUL 2024 in accordance with PWS para. 2.5.1st Option Year: 28 JUL 2023 - 27 JUL 2024 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 1004

This CLIN has been renumbered to CLIN 1006.

The IDC type has changed from Requirements to N/A.

The CLIN type priced has been deleted.

The CLIN description has changed from Repair/Replacement Parts to DELETED.

The CLIN extended description has changed from:

The Contractor shall provide replacement/repair parts and materials that require labor, equipment, and transportation in accordance with paragraph 2.6 of the PWS on an as needed basis. All items under under this CLIN shall be Brand Name or Equal. The Contractor shall provide the prices for the listed items in Appendix B with the price proposal.

This CLIN has a Not to Exceed amount of KRW 16,628,923.1st Option Year: 28 JUL 2023 - 27 JUL 2024

The pricing detail quantity 25.00 has been deleted.

The unit of issue Each has been deleted.

The option status has changed from Option to No Status.

The cost constraint NTE has been deleted.

The FOB Destination has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

The WSC Equipment code 000 has been deleted.

CLIN 1005

This CLIN has been renumbered to CLIN 1004.

CLIN 2001

The CLIN extended description has changed from:

including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) 2nd Option Year: 28 JUL 2024 - 27 JUL 2025 including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) 2nd Option Year: 28 JUL 2024 - 27 JUL 2025 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 2002

This CLIN has been renumbered to CLIN 2005.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Corrective Maintenance (CM) to DELETED.

in accordance with PWS para. 2.42nd Option Year: 28 JUL 2024 - 27 JUL 2025

SUBCLIN 2002AA

This SUBCLIN has been renumbered to SUBCLIN 2005AA.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Technician (CT) to DELETED.

The pricing detail quantity has decreased by 2,190.00 from 2,190.00 to 0.00.

The unit of issue Hours has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

CLIN 2003

in accordance with PWS para. 2.5.2nd Option Year: 28 JUL 2024 - 27 JUL 2025 in accordance with PWS para. 2.5.2nd Option Year: 28 JUL 2024 - 27 JUL 2025 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 2004

This CLIN has been renumbered to CLIN 2006.

The IDC type has changed from Requirements to N/A.

The CLIN type priced has been deleted.

The CLIN description has changed from Repair/Replacement Parts to DELETED.

The CLIN extended description has changed from:

The Contractor shall provide replacement/repair parts and materials that require labor, equipment, and transportation in accordance with paragraph 2.6 of the PWS on an as needed basis. All items under under this CLIN shall be Brand Name or Equal. The Contractor shall provide the prices for the listed items in Appendix B with the price proposal.

This CLIN has a Not to Exceed amount of KRW 17,182,705.2nd Option Year: 28 JUL 2024 - 27 JUL 2025

The pricing detail quantity 24.00 has been deleted.

The unit of issue Each has been deleted.

The option status has changed from Option to No Status.

The cost constraint NTE has been deleted.

The FOB Destination has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

The WSC Equipment code 000 has been deleted.

CLIN 2005

This CLIN has been renumbered to CLIN 2004.

CLIN 3001

The CLIN extended description has changed from:

including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) 3rd Option Year: 28 JUL 2025 - 27 JUL 2026 including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) 3rd Option Year: 28 JUL 2025 - 27 JUL 2026 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 3002

This CLIN has been renumbered to CLIN 3005.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Corrective Maintenance (CM) to DELETED.

in accordance with PWS para. 2.43rd Option Year: 28 JUL 2025 - 27 JUL 2026

SUBCLIN 3002AA

This SUBCLIN has been renumbered to SUBCLIN 3005AA.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Technician (CT) to DELETED.

The pricing detail quantity has decreased by 2,190.00 from 2,190.00 to 0.00.

The unit of issue Hours has been deleted.

The option status has changed from Option to No Status.

The cost constraint EST has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

CLIN 3003

in accordance with PWS para. 2.5.3rd Option Year: 28 JUL 2025 - 27 JUL 2026 in accordance with PWS para. 2.5.3rd Option Year: 28 JUL 2025 - 27 JUL 2026 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 3004

This CLIN has been renumbered to CLIN 3006.

The IDC type has changed from Requirements to N/A.

The CLIN type priced has been deleted.

The CLIN description has changed from Repair/Replacement Parts to DELETED.

The CLIN extended description has changed from:

The Contractor shall provide replacement/repair parts and materials that require labor, equipment, and transportation in accordance with paragraph 2.6 of the PWS on an as needed basis. All items under under this CLIN shall be Brand Name or Equal. The Contractor shall provide the prices for the listed items in Appendix B with the price proposal.

This CLIN has a Not to Exceed amount of KRW 17,740,059.3rd Option Year: 28 JUL 2025 - 27 JUL 2026

The pricing detail quantity 27.00 has been deleted.

The unit of issue Each has been deleted.

The option status has changed from Option to No Status.

The cost constraint NTE has been deleted.

The FOB Destination has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

The WSC Equipment code 000 has been deleted.

CLIN 3005

This CLIN has been renumbered to CLIN 3004.

CLIN 4001

including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) 4th Option Year: 28 JUL 2026 - 27 JUL 2027 including minor Corrective Maintenance (CM) and On-Call (OM) Repair services with fully burdened loaded labor prices and related prices to perform the CCTV maintenance services for Area I, II, III, and IV in accordance with Appendix A list and the PWS requirements.(Firm Fixed Price CLIN) 4th Option Year: 28 JUL 2026 - 27 JUL 2027 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 4002

This CLIN has been renumbered to CLIN 4005.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Corrective Maintenance (CM) to DELETED.

in accordance with PWS para. 2.44th Option Year: 28 JUL 2026 - 27 JUL 2027

SUBCLIN 4002AA

This SUBCLIN has been renumbered to SUBCLIN 4005AA.

The IDC type has changed from Requirements to N/A.

The CLIN description has changed from Technician (CT) to DELETED.

The pricing detail quantity has decreased by 2,190.00 from 2,190.00 to 0.00.

The unit of issue Hours has been deleted.

The option status has changed from Option to No Status.

The cost constraint EST has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

CLIN 4003

in accordance with PWS para. 2.5.4th Option Year: 28 JUL 2026 - 27 JUL 2027 in accordance with PWS para. 2.5.4th Option Year: 28 JUL 2026 - 27 JUL 2027 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent..

CLIN 4004

This CLIN has been renumbered to CLIN 4006.

The IDC type has changed from Requirements to N/A.

The CLIN type priced has been deleted.

The CLIN description has changed from Repair/Replacement Parts to DELETED.

The CLIN extended description has changed from:

The Contractor shall provide replacement/repair parts and materials that require labor, equipment, and transportation in accordance with paragraph 2.6 of the PWS on an as needed basis. All items under under this CLIN shall be Brand Name or Equal. The Contractor shall provide the prices for the listed items in Appendix B with the price proposal.

This CLIN has a Not to Exceed amount of KRW 18,259,303.4th Option Year: 28 JUL 2026 - 27 JUL 2027

The pricing detail quantity 25.00 has been deleted.

The unit of issue Each has been deleted.

The option status has changed from Option to No Status.

The cost constraint NTE has been deleted.

The FOB Destination has been deleted.

The PSC code H359 has been deleted.

The PROG code S10 has been deleted.

The WSC Equipment code 000 has been deleted.

CLIN 4005

This CLIN has been renumbered to CLIN 4004.

CLIN 0002 is added as follows:

ITEM NO SUPPLIES/SERVICES ESTIMATED

QUANTITY

UNIT UNIT PRICE ESTIMATED AMOUNT

0002 60 Job Corrective Maintenance (CM)

FFP

in accordance with PWS para. 2.4 Base Year: 28 JUL 2022 - 27 JUL 2023 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PSC CD: H359

ESTIMATED

NET AMT

CLIN 1002 is added as follows:

UNIT UNIT PRICE ESTIMATED AMOUNT

1002 60 Job OPTION Corrective Maintenance (CM)

FFP

in accordance with PWS para. 2.4 Base Year: 28 JUL 2023 - 27 JUL 2024 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

CLIN 2002 is added as follows:

UNIT UNIT PRICE ESTIMATED AMOUNT

2002 60 Job OPTION Corrective Maintenance (CM)

FFP

in accordance with PWS para. 2.4 Base Year: 28 JUL 2024 - 27 JUL 2025 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

CLIN 3002 is added as follows:

UNIT UNIT PRICE ESTIMATED AMOUNT

3002 60 Job OPTION Corrective Maintenance (CM)

FFP

in accordance with PWS para. 2.4 Base Year: 28 JUL 2025 - 27 JUL 2026 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

CLIN 4002 is added as follows:

UNIT UNIT PRICE ESTIMATED AMOUNT

4002 60 Job OPTION Corrective Maintenance (CM)

FFP

in accordance with PWS para. 2.4 Base Year: 28 JUL 2026 - 27 JUL 2027 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

DELIVERIES AND PERFORMANCE

The following Delivery Schedule for CLIN 0002 has been added:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 28-JUL-2022 TO

27-JUL-2023

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

W91PR5

The following Delivery Schedule for CLIN 0004 has been deleted:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 28-JUL-2022 TO

27-JUL-2023

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for SUBCLIN 0005AA has been added:

CAGE

POP 28-JUL-2022 TO

27-JUL-2023

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 1002 has been added:

CAGE

POP 28-JUL-2023 TO

27-JUL-2024

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 1004 has been deleted:

CAGE

POP 28-JUL-2023 TO

27-JUL-2024

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for SUBCLIN 1005AA has been added:

POP 28-JUL-2023 TO

27-JUL-2024

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 2002 has been added:

CAGE

POP 28-JUL-2024 TO

27-JUL-2025

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 2004 has been deleted:

CAGE

POP 28-JUL-2024 TO

27-JUL-2025

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for SUBCLIN 2005AA has been added:

CAGE

POP 28-JUL-2024 TO

27-JUL-2025

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 3002 has been added:

CAGE

POP 28-JUL-2025 TO

27-JUL-2026

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 3004 has been deleted:

CAGE

POP 28-JUL-2025 TO

27-JUL-2026

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for SUBCLIN 3005AA has been added:

CAGE

POP 28-JUL-2025 TO

27-JUL-2026

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 4002 has been added:

POP 28-JUL-2026 TO

27-JUL-2027

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for CLIN 4004 has been deleted:

CAGE

POP 28-JUL-2026 TO

27-JUL-2027

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

The following Delivery Schedule for SUBCLIN 4005AA has been added:

CAGE

POP 28-JUL-2026 TO

27-JUL-2027

N/A HQ 8A ANNEX

ROBERT ALDRIDGE

IMCOM-P (FORWARD)

BLDG P12401 RM J1-102

APO AP 96271

UNITED STATES

315-755-8036

INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for CLIN 0002:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

Destination Government Destination Government

The Acceptance/Inspection Schedule for CLIN 0006 has been changed from:

Destination Government Destination Government

To:

N/A N/A N/A N/A

The following Acceptance/Inspection Schedule was added for CLIN 1002:

The Acceptance/Inspection Schedule for CLIN 1006 has been changed from:

Destination Government Destination Government

To:

The following Acceptance/Inspection Schedule was added for CLIN 2002:

The Acceptance/Inspection Schedule for CLIN 2006 has been changed from:

Destination Government Destination Government

To:

The following Acceptance/Inspection Schedule was added for CLIN 3002:

The Acceptance/Inspection Schedule for CLIN 3006 has been changed from:

Destination Government Destination Government

To:

The following Acceptance/Inspection Schedule was added for CLIN 4002:

The Acceptance/Inspection Schedule for CLIN 4006 has been changed from:

Destination Government Destination Government

To:

The following have been added by reference:

52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.245-1 Alt I Government Property (SEP 2021) Alternate I APR 2012 52.245-9 Use And Charges APR 2012 252.211-7003 Item Unique Identification and Valuation MAR 2022 252.245-7001 Tagging, Labeling, and Marking of Government-Furnished

Property

APR 2012

252.245-7002 Reporting Loss of Government Property JAN 2021 252.245-7003 Contractor Property Management System Administration APR 2012 252.245-7004 Reporting, Reutilization, and Disposal DEC 2017

The following have been modified:

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

Maintenance and Repair of Electronic Security System Closed Circuit Television (CCTV), IMCOM-Pacific, Korea Wide

1.0. Background. The objective of this effort is to implement a standardized, centrally managed Electronic Security System (ESS) Program for IMCOM-Pacific to include ESS System preventive maintenance and repair service, compatible with the Closed Circuit Television (CCTV) Systems located at the Access Control Points (ACP). The Contractor shall perform this program services for Quarterly Scheduled Maintenance (SM), including Corrective Maintenance (CM) and Emergency On-Call (EM) Repair Service of the CCTV Systems for each of the following Areas: Area I, Area II, Area III and Area IV simultaneously.

2.0. Description of Work. The contractor shall perform maintenance and repair on all CCTV Systems equipment and components listed in Appendix A as required in the performance work statement (PWS). The priority of performance shall be Emergency On-Call repair, followed by Corrective Maintenance repair and then Scheduled Maintenance repair services at all locations listed in Appendix A.

2.0.1. The Contractor shall provide all personnel, management, supervision, testing, equipment, tools, supplies, and transportation necessary for EM, CM, and SM and repair of all Closed Circuit Television (CCTV) equipment.

Appendix A is provided for estimated workload data with detailed information about the CCTV and their locations.

Appendix A, equipment list shall be kept current with additions or deletions by the Contracting Officer Representative (COR) on an as needed basis and with the issuance of a contract modification. The Government reserves the right to add or delete the number of CCTV systems during the life of the contract.

2.1. Specific Requirement: The Contractor shall perform the work described herein at the locations listed in Appendix A to include the SM and other work required to execute CM, EM, and additional improvements.

2.2. Existing System Overview. Existing systems to be maintained are listed in Appendix A. Within the first 90 days, the contractor shall verify and validate equipment in Appendix A as part of baseline inventory of the initial SM for each location. Once verified, validated and inventoried, the Contractor shall submit a conclusive list per each location for each area to the COR. Additional locations not covered under Appendix A may be added to Appendix A for SM, CM and EM as additional systems are installed and/or currently installed systems are no longer covered under manufactures / installers warranty.

2.3. Scheduled Maintenance and Repair (SM). Within the first 90 days, the Contractor shall provide a SM plan to support this program outlining the method by which the contractor will conduct the required SM. The plan must also include how the contractor will conduct repair services correcting deficiencies identified during SM. SM shall occur quarterly for each of the locations in Appendix A. SM shall be performed Monday through Friday, 0800 to 1700hrs local, excluding US Holidays.

2.3.1. The Contractor shall repair all minor system problems detected during SM which are not covered under Corrective Maintenance (CM). Consumable Repair parts (screws, nuts, bolts, etc.) required to perform SM and parts costing less than or equal to ₩30,000 shall be purchased by the contractor without any reimbursement from the Government.

2.3.2. DELETED

2.3.3. The Contractor shall provide the quarterly SM inspection schedules and item checklists for the equipment and items covered in this PWS at the post award conference and quarterly thereafter to the COR.

2.3.4. A monthly report shall be provided to the COR via e-mail between the 1st and 5th of each month listing SM Service calls (date of SM, location of equipment maintained, type of equipment and repair parts utilized) separated by Area.

2.3.5. The contractor shall contact the COR and the Area representative for approval of quarterly SM schedule by the 1st of the month, and prior to commencement of any SM in an Area or location listed in Appendix A.

2.3.6. SM shall be performed in accordance with the Manufacturers Standard Maintenance Procedures applicable to the CCTV Systems in use.

2.3.7. SM shall include the following:

2.3.7.1. Inspection and cleaning of all console equipment, peripheral equipment, pan/tilt units, receiver/driver units, housings, camera/lenses and electrical and mechanical controls.

2.3.7.2. Repair all console equipment, peripheral equipment, pan/tilt units, receiver/driver units, housings, camera/lenses and electrical and mechanical controls.

2.3.7.3. Inspect exterior surfaces for damages that may lead to malfunctions of equipment.

2.3.7.4. Inspection and cleaning all system equipment and lenses and glass windows on the housings. Clean and inspect the receiver drivers and perform local testing and calibrating of the pan and tilt units.

2.3.7.5. Check, walk test, and calibrate each camera.

2.3.7.6. Operate all system software diagnostics and correct all diagnosed problems.

2.3.7.7. Resolve any previous and identified outstanding problems.

2.3.7.8. Visual checks and operational tests of the Central Processing Unit (CPU), switcher, peripheral equipment, interface panels, recording devices, monitors, video, and picture quality from each camera.

2.3.7.9. Perform minor repairs of system, such as tightening of loose connections, re-setting of cameras, adjusting video quality and performing a communications line test.

2.3.7.10. Conduct a functional test of all devices.

2.4. Corrective Maintenance (CM) Repair: CM shall be performed on all system problems and issues which are detected during SM which cannot be repaired during scheduled SM. CM requests shall be submitted to the COR for review and approval. CM shall include replacing non-operational major items under an establish contract CLIN.

Contractor shall submit to the COR, by Area, a detailed description of repair parts required for repairs.

2.4.1. Consumable Repair parts (screws, nuts, bolts, etc.) required to perform CM and parts costing less than or equal to ₩30,000 shall be purchased by the contractor without any reimbursement from the Government.

2.4.2. Repair parts exceeding ₩30,000 require the CORs technical review and recommendation to the Contracting Officer's (KO) who will issue a Task Order under an established contract CLIN.

2.4.3. Upon notification by the COR through request for price quotation, the Contractor shall provide price quotations to the COR to include required type of labor, number of skilled labor hours, and the parts and material for corrective maintenance service. The COR will forward this request and the quote to the Contracting Officer (KO).

The final price reasonableness will be determined by the KO for individual task order upon the COR’s technical verification.

2.4.4. The Contractor shall submit detailed supporting documentation identifying manufacturer and the model of all parts or materials proposed in their price quotations. The Contractor shall provide or otherwise make available a copy of published price in the Information on Commodity Price (ICP) book and/or commercial market price lists and other verification documents.

2.4.5. All parts and materials used shall meet manufacturers and/or industry standards. The Contractor shall be responsible for keeping records of all material warranties and for providing the Government credit for the material that requires replacement while covered under the terms of the warranty.

2.4.6. The contractor shall provide the COR a corrective maintenance after action report within 10 days of completing CM. The report will include work completed, warrantee status of replaced / repaired parts, warrantee status on labor and if any future actions / maintenance are required.

2.5. Emergency On-Call Maintenance (EM) Repair Service: The Government will initiate Emergency on-call service when the CCTV system is not functioning properly. Qualified personnel shall be available to provide service to the complete CCTV system. Service personnel shall be at the site within eight (8) hours after receiving a request for service. The EM service can be accomplished within eight (8) hours of work. Forecasted frequency of EM is to be estimated at 15 jobs (less or over) per each area.

2.5.1. As soon as the contractor determines that it cannot be repaired within eight (8) hours, the contractor shall immediately inform the COR of the situation. In the event the on-call repair cannot be made, the contractor shall specify to the COR the exact problem and the needed item (part) for repair.

2.5.2. During EM service the Contractor shall clean up all debris/discarded materials resulting from their operations, and job site and adjacent area shall be cleaned prior to leaving the job site. The sites may also provide access at other times to include weekends and after duty hours after receipt of notice or as requested for trouble calls.

2.5.3. In the event that there are more requests than can be responded to within eight (8) hours, the COR in coordination with the area representative, shall prioritize the tasks.

2.5.4. The contractor shall furnish a point of contact (POC) to receive EM on-call repair service, in writing, to the COR at the post award meeting and as changes occur. POC shall be available and able to be contacted on a 24 hour basis, 7 days week. The contractor shall provide a local telephone number where the contractor can be notified / contacted. Answering services and recordings are not sufficient/authorized for this purpose.

2.6. Replacement Parts: The Contractor shall provide replacement/repair parts and materials for any maintenance performed under this contract. Labor cost for replacement/repair parts shall be established in a contract CLIN

2.6.1. Replacement parts without technical specifications: The contractor shall not install any parts that do not have documented technical specifications without the approval by the COR. If the contractor must install replacement parts without technical specifications, the contractor shall provide the COR a written report of the capabilities and limitations of the part and why the chosen replacement part is being considered over a replacement part with documented technical specifications.

2.6.2. Once the COR approved the list of repair parts, the COR is responsible to request a task order for repair parts used for CM and EM from the identified items under the established contract CLIN (Replacement Parts) in this contract.

2.7. The Contractor shall make any recommendations for system modification in writing to the Government.

System modifications shall not be made without prior approval of the Government. Any modifications made to the system shall result in the updating of the operation and maintenance manuals as well as any other documentation affected.

2.8. The contractor shall not purchase any new equipment and or repair parts that are manufactured in China.

3. Contractor Requirements.

3.1.1. Contractor Qualification Requirement. Contractor shall provide documentation indicating three (3) years’ experience installing and repairing CCTV systems. Contractor shall have a certified Communication Technician (CT) with certification issued by the appropriate agency within the Republic of Korea (ROK). The Contractor shall speak fluent English and shall provide a list of personnel performing work to the COR. Contractor personnel shall accomplish all work promptly and satisfactorily. The Contractor shall provide/maintain its own service vehicles, lifts, tools, and shall provide fuel for travel to the areas listed with in this PWS

3.1.2 Project Manager (PM). The contractor shall provide a qualified PM who shall be responsible for the overall performance of the work and be given authority to make on-site decisions on contract matters. The PM shall have three (3) years of experience as a PM on similar projects and must be documented in their resume. The PM shall be available during normal duty hours Mon-Fri 0800-1700 to meet with the COR to discuss contract status and address issues / concerns. Meeting may occur at any of the four (4) Areas. The contractor shall ensure the PM monitors and is in communication with the contractor’s employees at all times during established work hours.

3.1.3. Communications Technician (CT). The contractor shall provide a certified CT. The CT shall have three (3) years of experience as a CT on similar projects and must be documented in their resumes. CT must be experienced with fiber based closed security networks and be able to program a CCTV head-end system for multiple remote viewing locations.

3.1.4. Technicians. The contractor shall provide experienced Cable Communication Engineer personnel (technician(s)) to be considered qualified to perform maintenance and repair of the CCTV equipment listed in Appendix A.

3.1.5. Substitutions. The contractor shall provide personnel equal in qualifications, certifications, and licensing when they provide alternate support personnel in / during events where primary support personnel are not available (i.e.

leave status, hospitalization, or injury). All requests for approval of substitutions must be in writing and provide a detailed explanation of the circumstances necessitating the proposed substitutions. The written documents must contain a complete resume for the proposed substituted and any other supporting information. The COR and Contracting Officer will evaluate such request. The COR will notify the Contractor of their approval or disapproval thereof in writing.

3.1.6. Personnel Verification. The contractor shall provide a list of personnel performing work under this contract to the COR prior to perform any work under this contract. The Government shall be advised in writing of the name of the contract manager, and of any change in personnel.

3.1.7. The Government has the right to restrict the employment under this contract of any Contractor employee, or prospective Contractor employee, who is identified as a potential threat to the health, safety, security, to US Army installations and its population.

3.1.8. All contractor personnel who operate a motor vehicle on any US Army Installation shall have a current and valid driver’s license. A copy of all licenses shall be provided to the COR within twenty (20) days after contract award.

3.1.9. All contractor employees, with an area of performance within an Army-controlled installation, facility, or area, shall comply with applicable installation, facility, and area commander installation and facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor workforce must comply with all personal identity verification requirements as directed by DoD, HQDA, and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

3.1.10. The contractor shall ensure that its employees entering Army-controlled installations or facilities have obtained access badges and passes in accordance with facility regulations and that these badges and passes are obtained in advance so as not to delay the accomplishment of contracted services.

3.1.11. The contractor employees must complete Level I OPSEC training within 30 calendar days of contract award.

All contractor employees must complete annual OPSEC awareness training.

3.1.12. All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, or controlled access areas shall complete AT Level I awareness training within 30 calendar days of contract award. The contractor shall submit certificates of completion for each person employed under this contract including subcontracted employees to the COR within 30 calendar days of contract award. AT Level I awareness training is available at Joint Knowledge Online (jten.mil).

3.1.13. The contractor shall not employ any employee of the United States Government; either military or civilian, if such employment would create a conflict of interest, nor employ any of their relatives or individuals with whom the Government employee has a covered relationship. If so, such employment would result in a violation of the Joint Ethics Regulation (JER).

3.1.14. The Garrison Commanders have the authority to bar individuals from US Army installations for misconduct.

The Contracting Officer may bar an employee from the work site in the interest of security, safety, or other legitimate Government concern. The barring of an employee from the job site or from the installation shall not relieve the contractor of the requirement to provide sufficient personnel to perform the services as required by this contract.

3.1.15. Contractor personnel and property shall be subject to search and seizure upon entering or leaving the confines of any USFK Installation.

3.1.16. Contractor personnel on duty shall wear contractor provided identification badges that identify the contractor personnel as contractors and not US Government Employees. Further contractor personnel working under this contract shall practice high standards of personal hygiene and maintain a clean, neat appearance while on duty.

3.1.17. The contractor shall provide a Corrective Maintenance Plan to the COR to support this program, to include method by which contractor shall respond to CM and EM repair services, correcting deficiencies.

3.2. System Operation. The Contractor shall verify operation of the system as demonstrated by the applicable portions of a Performance Verification Test (PVT) after performance of preventive maintenance or repair services, established by the COR.

3.3. Documentation. The Contractor shall prepare and submit a written preventive maintenance schedule to the COR for review on a quarterly basis. The schedule shall identify preventive maintenance; check items and anticipated minor repairs based on the diagnostics test conduct during the SM.

3.3.1. The Contractor shall separately record each service call request, as received. The form shall include the serial number identifying the component involved, its location, date and time the call was received, specific nature of trouble, names of service personnel assigned to the task, instructions describing what has to be done, the amount and nature of the material to be used, the time and date work started, and the time and date of completion. The Contractor shall deliver a record of the work performed within ten (10) days after work is accomplished.

3.3.2. A monthly report of all work performed and parts used shall be provided to the COR and applicable ACOR between the 1st and 5th of each month.

3.3.3 Records, logs, and reports. The Contractor shall maintain/facilitate all CCTV systems bar coded equipment to track: trouble tickets, spare inventory, configuration baselines on existing systems, warranty information, logs of each task, mean times between failures (MTBF), and life cycle management of the equipment.

3.3.4. Passwords and Designs. The Contractor shall provide a copy of all design, as-built drawings and passwords to the COR.

3.3.4.1. Passwords must be controlled and handled by appropriately indoctrinated personnel AR 380-5.

3.3.4.2. Upon completion of the contract, the contractor shall provide all designs, as-built drawings and passwords to the COR produced under this contract.

3.3.5. The Contractor shall return all issued U.S. Government Access Cards, installation badges, and/or access passes to the COR when the contract is completed or when a contractor employee no longer requires access to the installation or facility.

3.3.6. The Contractor shall prepare and submit a report of current site conditions to the Government documenting any site conditions affect performance of the system installed. The Contractor shall provide specification sheets, or written functional requirements to support the findings, and a cost estimate to correct those site changes or conditions. The Contractor shall not correct any deficiency without written permission from the Government.

3.4. Invoicing. The Contractor shall invoice the Government on a monthly basis for provided maintenance and repair services using the WAWF invoice system.

3.5. Coordination of Work. The Contractor shall coordinate all work with the Area representative or COR prior to commencing any work. Performance of work by contractor personnel under the terms of this contract shall not interfere with regularly scheduled Government operational activities.

3.6. Safety. The Contractor shall comply with the Engineering Manual (EM) 385-1-1K, General Safety Requirements and all local fire and safety codes.

3.7. DELETED

3.8. Warranty.

3.8.1. The Contractor shall guarantee that all installed parts; components, systems, and workmanship meet the specifications set forth by Government Regulations, this document, and manufactures standards. Additionally, the Contractor must warranty all Contractor supplied components, workmanship and/or systems for a (minimum) period of 24 months from the date of Government acceptance.

3.8.2. Should aContractor supplied part, component, workmanship, or system fail within that period of time, the Contractor shall immediately replace or repair that part, component, or system within 48 hours at no further cost to the Government.

3.8.3. The Contractor shall not be responsible for the repair or replacement of any part, component, or system that fails due to fire, flood, riots, and vandalism or because of the misuse of equipment by Government employees.

3.8.4. The warranty shall include full and complete coverage for the replacement of all hardware, software, firmware and includes the labor associated with the installation, troubleshooting, testing and certification of parts covered under the warranty.

3.8.5. The foregoing warranty is in lieu of all other warranties, expressed or implied, including but not limited to, the implied warranties of merchantability and fitness for this particular contract.

3.9. Training. The contractor shall conduct training for Area personnel in the operation of the CCTV system as requested by the COR. The training shall be oriented to the specific installed system.